Table of Contents
Hole Sizing A standard (non-air-gap) faucet, with or without tubing attached, needs a hole that’s 7/16″ in diameter or larger. You can install standard faucets comfortably in holes up to 1.25″. It’s possible to install in a 1.5″ hole, but it’s hard with the standard faucet escutcheon.
Are all kitchen faucet holes the same size?
While not all faucets are the same, the standard sink faucet hole size is 1 3/8 inches. For some, a 1 1/2-inch hole may be required. If the faucet is a three or four-hole faucet, you’ll need holes 6 or 8 inches across your kitchen sink. Widespread faucet hole spaces can be as wide as 16 inches.
Are all faucet holes the same size?
The standard size of a faucet’s hole is proportional to the water flowing from the water tanks. Most manufacturers create faucets with an ideal hole size of 1 3/8 inches or 34.925 millimeters. But some kitchen faucets may require a broader hole that is 1.5 inches.
What size hole do you drill for a single hole faucet?
Unless otherwise noted on the Specification Sheet for a single-control bathroom faucet, the hole size of the sink should be 1-3/8″ in size.
How do you measure sink hole for faucet?
If you have separate handles for hot and cold, you have three holes in the sink. Measure the distance between the handles. Hold the the tape measure above the faucet if it’s in the way. If the distance is six inches or more you need a “widespread” or “eight inch spread” faucet.
Can you put a one hole faucet in a three hole sink?
If you’re replacing the kitchen faucet in your existing sink, look underneath the sink to see how many holes it has (usually between one and four). You can install a one-hole faucet in a three- or four-hole sink by adding a deck plate but not vice versa.
Are three hole faucets standard size?
On many three- and four-hole kitchen sinks, 6 or 8 inches is a standard sink faucet hole size. Widespread faucet hole spaces can be as far apart as 16 inches. Faucets with this wider spread consist of separate parts that are individually spaced without an escutcheon or base plate joining them.
What does 8 inch spread faucet mean?
On an 8″ spread there will be 8″ from the center of the hot faucet to the center of the cold faucet. Like this: A 4″ or mini spread will be quite close together and make it difficult to clean around the handles and spout.
Are bathroom sink holes standard size?
While a bathroom sink’s design and overall size may vary from one model to the next, the drain holes are fairly standard, 1.25 inches being a general standard, with widths of 1.5 inches and 1.625 inches also common. The size of the hole helps determine which size drain is needed for that particular sink.
What is standard faucet spacing?
Measure for Standard Spacing 4 inches is the standard spacing for the compact centerset faucets, a single-piece faucet needing either three holes, for the hot and cold water valves and the drain popup, or two holes with no popup.
Are faucet aerators a standard size?
Size: Aerators typically come in one of two sizes: regular (usually 15/16” Male or 55/64” Female) and junior (usually 13/16” M or 3/4” F). You can measure your faucet, or use a simple shortcut using coins. If your faucet is roughly the size of a nickel, it needs a regular-size aerator.
Are kitchen sink tap holes a standard size?
Standard taps and spouts generally require a hole of at least 22mm in diameter. Monobloc mixer taps, taking both a hot and cold supply, mostly require a minimum 32mm diameter hole.
How do I choose a kitchen faucet size?
If you have windows or cabinets above your sink, measure upward from the center mounting hole to find the maximum overall height and ensure your new faucet can fit comfortably underneath. To find the ideal spout reach, measure from the center mounting hole forward to the center of your sink.
What is a 3 hole faucet?
A 3-hole sink is very common. Here, the kitchen faucet usually has a plate that covers the three holes (called an escutcheon or deck plate). A 2-hole sink usually has one hole for a single-hole faucet and a second hole for an accessory, such as a soap dispenser or sprayer. This sink might also be a bar or prep sink.
Will any faucet fit my sink?
Not all bathroom sink faucets work with every sink, so it’s important to make sure the faucet you choose will fit your sink or basin. Standard faucet drillings are centerset, single-hole or widespread.
What size are kitchen faucet supply lines?
The two most common are 3/8- and 1/2-inch compression or male pipe thread. Faucets connectors aren’t completely standardized, but most have 1/2-inch male pipe thread connectors.
Can you replace a centerset faucet with a single hole faucet?
A 4-inch centerset faucet uses three holes for mounting, but this can be replaced with a single-lever faucet without also replacing the sink or countertop with a single hole.
Can you put a two hole faucet in a three hole sink?
Even if you have three holes on your sink, you can still use a faucet designed for one or two holes. Many single-lever faucets come with a base wide enough to cover three holes on the sink, provided the holes are 4 inches apart or closer.
What is a 2 hole faucet?
A 2 hole kitchen faucet is a popular style. Kitchen sink faucets that install in two holes are stylish and functional.
What is 8 inch faucet hole spacing?
8” Widespread Faucet Widespread faucets are composed of three individual pieces of faucets. These will work in sinks with three holes that are 8 inches apart. The difference lies in the measure of the distance of the outer holes from the center. The hot and cold dials of the set are not dependent on the spout.
