Table of Contents
Sizing. A grommet that is 1/4 inch larger than the rod diameter slides smoothly along the rod. For example, a common 1 5/8-inch grommet glides over a 1 3/8-inch diameter rod.
What is the standard size for grommets in curtains?
Keep in mind that the standard length of grommet panels is 84”, although longer lengths are also available.
What size curtain rod diameter do I need?
Selecting the Right Size. Choose a curtain rod with a diameter of at least 1 inch (2.5 cm). Thin curtain rods tend to look cheap and can bow under the weight of your drapes if they are heavy. When choosing a curtain rod, look for a rod that is at least 1 inch (2.5 cm) thick for good aesthetics and curtain support.
How do you measure for grommet curtain rods?
How to Measure: Grommet Top Curtains Measure from where you’d like your rod installed to where you want the curtain to fall. Measure grommet panel length from the very top of the curtain (not the top of the grommet) to the bottom. The grommet is set down about 1″ from the top of the panel.
What kind of rod do you use for grommet curtains?
For example, a common 1 5/8-inch grommet glides over a 1 3/8-inch diameter rod. It’s large enough to allow for curtain movement in windy conditions as well; the curtain can billow without rigid stress from an inflexible mounting system.
How do you know what size grommets to buy?
Sizes for grommets are generally listed as a the measurement of the inside diameter (the hole). In the chart below we have provided exact measurements for inside diameter/outside diameter/depth. For size 12, we carry both size #12 and size #12L, both have same inside diameter but 12L is wider overall.
How wide can a curtain rod be without support?
For 1 3/8 Inch Diameter Wood Poles: Two curtain rod brackets are sufficient up to a width of 60 inches (5 feet). Having said that, a 2 inch or 3-inch diameter pole can span a distance up to a full 12-feet without flexing or bowing using only two end brackets.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
Why are grommet curtains so popular?
Grommet drapery panels have been a popular choice for draperies for years because they offer a modern, sleek look. Grommets allow the fabric to fall into folds creating a beautiful look from the top of the drape to the bottom of the drape.
How do you keep grommet curtains evenly spaced?
I would attach a thin piece of ribbon between each pair of grommets that allow the pleat to be the space that you need. Use the same length of ribbon on all of them. Then when you close the curtain all the pleats will be the same space.
What size curtains do I need for a 5ft window?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
Can you use grommet curtains on a tension rod?
Grommet curtains slide easily on and off tension rods but make sure that the curtains and grommets are not too heavy. Always measure the diameter of the grommets and curtain rods first to ensure that they are compatible.
How high should a curtain rod be for 84 inch curtains?
The length of the curtain dictates the height of the rod. If you buy 84-inch-long curtains, the rod must be mounted roughly 84 inches from the floor if the curtains hang from the rod without rings. This lets the hem of the curtains brush the floor.
Are there different sizes of grommets?
What Are The Standard Grommet Sizes? The most common grommets for banner sizes are 3/16 of an inch, 3/8 of an inch, one half of an inch, 1 inch, 7/16 of an inch, three, in the most widely used size being a grommet is 3/8 of an inch.
Are all grommets the same size?
You can find grommets made out of a variety of materials and in many different sizes with varying hole diameters.
How do you measure the width of grommet top curtains?
Related Articles Measure from the center of one grommet to the center of the next grommet. Hang the chosen curtain rod in place on the window wall. Determine the space you want the curtains to cover. Multiply the space available by 1.5 for a typical grommet curtain panel fullness.
How far should a curtain rod extend past window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
How long can a curtain rod be without a middle support?
A center bracket is needed in almost any length greater than 5 to 6 feet, if you want to avoid any sagging. However there are “C” rings that will go over the bracket so that the drapes/curtains can be pulled to one side (either side, in fact).
