Table of Contents
Selecting the Right Size. Choose a curtain rod with a diameter of at least 1 inch (2.5 cm). Thin curtain rods tend to look cheap and can bow under the weight of your drapes if they are heavy. When choosing a curtain rod, look for a rod that is at least 1 inch (2.5 cm) thick for good aesthetics and curtain support.
Does diameter of curtain rod matter?
Common curtain rod diameters are typically between 1-3 inches, depending on the weight of your curtains. Choosing a bit longer curtain rod will give the appearance of a grander window and treatment, while also allowing your window’s full amount of natural light inside when the curtains are open.
What size curtain rod do I need for a 60 inch window?
How to Measure for Curtain Rods Frame Width Rod Width Up to 50” Frame width PLUS 10” 51” to 60” Frame width PLUS 12” 61” to 70” Frame width PLUS 14” 71” to 80” Frame Width PLUS 16”.
What diameter curtain rod is best for grommet curtains?
Sizing. A grommet that is 1/4 inch larger than the rod diameter slides smoothly along the rod. For example, a common 1 5/8-inch grommet glides over a 1 3/8-inch diameter rod.
What size curtain rod do I need for a 3 inch pocket?
A 3 inch pocket will accept a 2 1/2 inch continental curtain rod or a 1 1/2 inch diameter round decorative rod. Most of our Curtains and Drapes have this size pocket. Decorative Rods should be used with Grommet and Tab Top Curtains.
How wide can a curtain rod be without support?
For 1 3/8 Inch Diameter Wood Poles: Two curtain rod brackets are sufficient up to a width of 60 inches (5 feet). Having said that, a 2 inch or 3-inch diameter pole can span a distance up to a full 12-feet without flexing or bowing using only two end brackets.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How do you measure for hanging curtain rods?
To determine the length of the rod, measure the width of your window and add eight to twelve inches. Each curtain panel should be at least as wide as your window.
How do you measure a window for a curtain pole?
Measuring for a new curtain pole Start by measuring the width of your window (A). To this measurement add B twice. Usually, B is 15cm (6″) and provides space needed for the curtains to be drawn back either side of the window. So to get the total length of your pole use A + B + B.
What is the standard size grommet for curtains?
STEP 5: Measure the height of your window. This will be the height of your curtain rod. Keep in mind that the standard length of grommet panels is 84”, although longer lengths are also available. Generally, grommet curtains just go to the floor.
How big are grommet holes in curtains?
We offer two sizes (2-inch and 1-9/16-inch) of metal curtain grommets in four colors: nickel, black, brass and antique finish. Metal curtain grommets are suitable for any weight of curtain fabric.
How wide should grommet curtains be?
The grommet panel must be a minimum of 70 inches wide, between the side hem seams, to provide just slightly more than 1.5 times fullness on the 40-inch space. Purchase more panels and push the grommets closer together on the rod for a fuller look.
How do you measure for rod pockets?
Measure the circumference of your curtain rod. Add 1/2 inch to this measurement. For example, a standard curtain rod will measure 2 inches around so your rod pocket opening will need to be 2 1/2 inches; add this to the length of your curtains.
What is a continental curtain rod?
Continental curtain rods, also called dauphine rods, are a flat faced rod that can be used for heavier drapes or for several variations of decorative valances. They are available in metal or plastic and range in size from 2 1/2 to 4 1/2 inches wide. There are also continental rods for curved and bay windows.
How many inches curtain header?
Cut the fabric into panels the finished length you want the curtains to be plus 4 inches. Panel width depends on the type of header tape you use and the type of pleats you want to make. Follow the header tape manufacturer’s instructions for figuring width, and allow 3 inches for side hems.
How do I keep my curtain rod from sagging in the middle?
10 Clever Ways to Fix a Sagging Curtain Rod at Home Realign the Support Brackets. Provide Extra Support Brackets. Insert Another Support Rod. Change Your Fabric Material. Reduce the Cotton’s Length. Use a Barrier to Protect Your Curtain. Get a More Durable Curtain Rod. Replace Your Support Brackets.
How long can a curtain rod be without a middle support?
A center bracket is needed in almost any length greater than 5 to 6 feet, if you want to avoid any sagging. However there are “C” rings that will go over the bracket so that the drapes/curtains can be pulled to one side (either side, in fact).
How far should a curtain rod extend past window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
