Table of Contents
What is the best size chainsaw for an Alaskan mill?
You will want to have a saw that has at least a 50cc displacement and can run a 20-inch chain. However, if you’re cutting smaller logs and milling smaller boards, you can use a smaller saw.
What size saw do I need for an Alaskan sawmill?
Then we see which log size can you mill with each cc saw and finish by analyzing what exactly makes chainsaw milling so power-intensive.Saw CC. vs. Log diameter. SAW CC. vs. LOG SIZE Engine size (min.) Log diameter (Alaskan Mill) Log diameter (easy) 50cc <20” <12″ 60cc <32” <16” 90cc <52” <32″ 120cc <70…78” >32″.
What kind of chainsaw does Alaskan mill use?
For using an Alaskan mill, we recommend the Echo CS-590-20. It’s got a translucent fuel tank that makes it easy to tell when the powerful 59.8cc two-stroke motor is low on fuel. Plus, it’s covered by an impressive five-year warranty.
Can you mill with a 50cc chainsaw?
Re: Need Advice Concerning the Alaskan Chainsaw Mill The short answer is Yes.. you can do it with a 50cc saw but you will kill it pretty fast.
What kind of chainsaws do they use on the show Big Timber?
Generally the Pro grade Stihls, Husquvarna (XP series), Johnserred (pretty much same as Huskys) with a smattering of Dolmars, Oleo Macs and a couple of others. Pro Mac 610 is a 60cc saw, so something like a Stihl MS 362 or a Husky 357XP would be the current replacement.
Are chainsaw Mills good?
A chainsaw mill is one of the most efficient and effective tools when it comes to converting wood into lumber. Lumber is a very effective raw material that can be used for a variety of purposes. Be it for firewood or be it for construction purposes, you can certainly utilize lumber for whatever you need.
Do you need a ripping chain for Alaskan saw mill?
Details matter which is why we work so hard to provide quality products for every part of our Alaskan® Chainsaw Mills. A properly sharpened and maintained ripping chain is critical to achieving the best possible end result when chainsaw milling.
How fast is chainsaw mill?
Cutting speeds can vary from 8 feet a minute in narrow softwoods, to 1-1/2 feet a minute in wide hardwoods.
Does Stihl make a chainsaw mill?
Amazon.com: stihl chainsaw mill.
What should I look for in a chainsaw mill?
Also, look at the chainsaw mill’s cutting capacity, which tells you how wide of a log it can tackle, as well as its maximum cutting depth. If you routinely work on large logs, you’ll want a chainsaw mill capable of making wide, deep cuts.
How much is a Stihl 661?
Featuring an impressive power-to-weight ratio and STIHL M-Tronic™ engine management technology, the MS 661 C-M is a professional chainsaw designed for felling large diameter trees.Amick’s Price: $1,279.95. DISPLACEMENT 91.1 cc (5.56 cu. in.) OILOMATIC® CHAIN 33 RS3 POWER SOURCE Gas.
How many cc’s do you need for a chainsaw mill?
In general, you will need at least 50cc to run our smallest mill (G777). The more powerful your saw, the easier your milling experience is going to be. Consult the chart to see if your chainsaw has enough power to do the job you want it to do.
Do Alaskan mills work well?
The Alaskan mill will make 2X4s, but it would be a lot of work. On the other hand, if you need large timbers or beams for a project, the Alaskan mill is very effective. The Alaskan mill is also a good tool when working in a remote location. It is also a good tool for a woodworker or a person who likes special woods.
Can I cut planks with a chainsaw?
Yes, you can mill a log using a chainsaw, but you need some appropriate attachments. Normally, chainsaws are used to cut across the grain of trees, but it can be adapted in such a way that it cuts efficiently along the grain to mill logs into planks, boards, or beams.
What size chainsaw do professional loggers use?
Since you’re buying a professional chainsaw, you should look out for nothing less than 40CC and 1 HP engine power. Chainsaws with more engine power will be more powerful than those with less engine size. Those chainsaws with an engine size of 40 to 80 CC are often used by loggers that have to fell a lot of trees.
What chainsaw chains do professional loggers use?
Full-chisel teeth chains are usually used by professionals on large saws. Semi-chisel teeth are rounded, so the risk of kickback is less, and they stay sharper longer. Semi-chisel teeth cut slower but are a better choice in dirty wood than full chisel.
Why is Husqvarna better than Stihl?
Side-by-side, Husqvarna edges out Stihl. Their safety features and anti-vibration technology allow for easier and safer use. And although Stihl chainsaw engines can have more power, Husqvarna chainsaws tend to be more efficient and better at cutting. As far as value goes, Husqvarna is also a top pick.
Is a saw mill worth it?
A portable sawmill can be worth the investment. It can provide a source of wood for your own projects and give you a side business. For a source of lumber, as well as a profitable business, a portable sawmill can be a key piece of equipment on your farm.
Is milling wood worth it?
Milling your own lumber can produce quality material for a fraction of the price of a lumber dealer. This means you select how you want the lumber cut and are in control as it’s drying. In my experience you’ll end up with stock that is much higher quality than you can readily buy.
Can you mill with a chainsaw?
The Alaskan mill is a simple metal frame, which attaches to the chainsaw bar and can be adjusted to change the depth of cut. If you didn’t own a chainsaw and decided that you wanted to cut some lumber, you could be making your own lumber for about $500, for a small chainsaw and the Alaskan mill attachment.
