Table of Contents
The larger the pitch will mean the higher the cutting teeth will be. The higher the teeth will therefore mean the larger the file will need to be. If you do not know your chainsaw pitch you can gauge it by measuring the distance between three rivets.File sizes. Chain pitch Round file diameter 3/8″ 5.2mm .404 5.5mm.
What size file do you use on a 3/8 chainsaw chain?
Yes the 7/32″ file is a perfect size for sharpening standard 3/8″ pitch chain (not 3/8″LP low profile).
What size file does a Stihl chainsaw take?
File size for Stihl saws Stihl recommendations are mostly in line with other manufacturers, but for 3/8” chains, Stihl specifies a 13/64” file instead of the more common 7/32”. Links to Amazon for the original Stihl files and the popular 2-in-1 sharpeners (files, handle, guide) included.
What size file do I need for a Stihl .325 chain?
STIHL Files come specifically designed for each pitch of saw chain, with this particular round file suited for use with a . 325″ pitch chain. The file size is 4.8mm x 200mm.
What file do you use to sharpen a chainsaw?
You should also need both round and flat files to sharpen your chainsaw chains in order to get the best results. Your round file will be needed to sharpen the side and top plates of the cutting teeth. You should then use a flat file to sharpen the depth gauge so that it keeps its shape.
What is a 3/8 pitch chain?
If you decide to measure the pitch yourself, just remember to measure between the middle points of 3 rivets on the chain, and then divide the number by 2. So, for a 3/8″ pitch chain, the measurement between three links would be 3/4″ (. 75″), which is 3/8″ (. 375″) when divided by 2.
How do I know what pitch my chainsaw chain is?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
What size file do I need for a STIHL 250?
Answer: My MS250 came with a . 325 chain which is a 3/16″ round file. You will need the sharpener for that one.
What is the difference between .325 and 3/8 chain?
325 is a smaller top cutter and tie strap it is easier to turn for a saw . The 3/8 is a bigger top cutter and tie strap . Mainly in a 20 ” chain has more cutters in .
What’s the difference between 3/8 and 325 chain?
The three-eighths chain is a beefier saw and better suited to one that has more horsepower. It has larger teeth and a heavier duty chain, so it requires more horsepower to operate correctly. 325-inch chain for those saws between 40 and 60 cc.
What chain does a STIHL ms170 use?
Ematic Lubrication System POWER SOURCE Gas POWERHEAD WEIGHT 8.6 lbs. GUIDE BAR LENGTH (Recommended) 16 in. OILOMATIC® CHAIN 3/8″ PMM3 CHAIN OIL CAPACITY 4.9 oz.
What size tree can a 14 inch chainsaw cut?
Cutting down medium size trees with a trunk of about 14″ to 16” will require a larger chainsaw of about 16″ to 18” to fell the tree in one easy pass.
What size file do I need for my Poulan chainsaw?
5/32″ File & Guide.
What does 72 mean on a chainsaw chain?
72 = 3/8 pitch .050 gauge or 1.3mm. 73 = 3/8 pitch .058 gauge or 1.5mm.
What size chain is on a Stihl ms180c?
Quick Chain Adjuster (QCA) (B) POWER SOURCE Gas GUIDE BAR LENGTH (Recommended) 16 in. OILOMATIC® CHAIN 3/8″ PMM3 CHAIN OIL CAPACITY 4.9 oz. ENGINE POWER 2.0 bhp.
Does gauge matter on chainsaw chain?
The gauge measurement of a saw chain tells a pro user about the strength of a chain’s drive links. Thicker drive links are usually stronger, but they are heavier. Weight affects performance, and to maximize cutting speed, weight should be kept to a minimum.
Why does my chainsaw blade go dull so fast?
What is this? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast. It won’t be hard to notice whether the wood that you’re cutting is dirty or not.
Are all chainsaw depth gauges the same?
A: When depth gauges are uneven, each cutter tooth on the chain takes a different sized bite. This causes the chain to cut rough and vibrate. If the depth gauges are higher on one side than the other, this causes the chain to cut crooked. The cut will pull in the direction of the side that has the lower depth gauges.
Can I put an 18 inch bar on a 16 inch chainsaw?
Yes, but you need a bar designed to fit on your saw. There are different designs for different saws, and the bar has to match the chain/sprocket configuration as well.
What is the difference between Stihl 250 and 251?
What Is the Difference Between Stihl 250 and 251? Overall, the differences between these two models are relatively small. However, the 250 model is . 7 pounds lighter and can hold 15.9 ounces of fuel, compared with the 13.2 ounce capacity of the 251.
How many cc is MS250?
Get more done with this compact STIHL® MS 250 High Performance Compact Chain Saw. This chainsaw has an exceptional power-to-weight ratio, so you get great bang for the buck. Specifications: Displacement: 45.4 cc (2.77 cu.
What chain do I need for a STIHL MS250?
Stihl 250 models use either a 0.050 inch, or a 0.063 inch gauge chain. The correct gauge measurement ensures that the chain neither binds nor fits too loosely in the bar.
What angle do you file a chainsaw chain in Oregon?
Oregon’s recommendation (at least for the chains I’ve used with some regularity) is 30˚ for their semi-chisel, and 25˚ for full chisel.
