Table of Contents
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
What size blade do I need for a 14 inch bandsaw?
Product Description. 3/16″ Wide x 93-1/2″ Long, 10 TPI, Band Saw Blade, . 025″ Thick, Fits All 14″ Delta/Rockwell, 14″ Jet, Grizzly, 14″ Reliant, Enlon, Star, Bridgewood & Most Imported 14″ Band Saws, Mild Scroll Cutting In Wood.
What size blade does a Craftsman 14 inch bandsaw take?
99.75 x 1/4 x 6 TPI Carbon Bandsaw Blade Fits Craftsman 14” Bandsaw 124.32607 Made In USA with USA Steel.
How do I know what size band saw blade I need?
In inches, determine the radius of each wheel, by measuring from the center to the outside of the wheel. Apply the following formula: (R1 x 3.1416) + (R2 x 3.1416) + (2 x C) = Saw blade length. Put a strip of tape on the floor to mark a starting point.
What does 14 mean on a bandsaw?
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. So a 14-inch band saw will have wheels that are 14-inches in diameter. There is another measure that indicates how wide a board you can resaw.
What is a standard bandsaw blade size?
The majority of bandsaw blades for woodworking are . 025” or 1/40 in. thick; it is the standard thickness for most saw sizes.
What is 14 TPI for cutting?
A blade with 14 TPI is coarse whilst a blade with 32 TPI is very fine. They do not last as long a High Speed Steel blades. These are much more expensive but keep their cutting edge for longer and are suitable for cutting hard materials such as stainless steel and alloys.
How do you measure a bandsaw blade TPI?
How to Measure the Teeth Per Inch (TPI) of a Bandsaw Blade Always begin the TPI measurement in the center of the gullet. Measure left to right one inch along blade, from the center of the gullet. Count the number of teeth in that one-inch space. That number of teeth is the blade’s TPI.
Are all bandsaw blades the same length?
Bandsaw blades differ in thickness, width, length, and tooth configuration. Length varies by machine, but the size of your saw’s wheels typically determines thickness and width: Smaller machines (9–12″ wheels) need thinner blades to prevent breaking the welds. They also accept only narrow blades, often 1⁄ 2 ” or less.
How do I choose a band saw blade?
Use coarse tooth blades (2 or 3 TPI) for re-sawing and cutting thicker materials. For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
What does TPI mean on a band saw blade?
TPI. For maximum cutting efficiency and lowest cost per cut, it is important to select a blade with the right number of teeth per inch (TPI) for the material you are cutting. See Carbide Tooth Selection on page 18 or Bi-metal Tooth Selection on page 21.
What size of bandsaw do I need?
For a hobbyist, a 12″-14″ bandsaw is the ideal size. This size saw will provide plenty of power and a good deal of resawing capability. A professional will be better served with an 18″ bandsaw for a larger resawing capability.
What is a good size bandsaw?
For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
How do you measure the width of a bandsaw blade?
Blade width is measured from the tips of the teeth to the back edge of the blade as shown above. The instructions for the particular machine being used should be followed when selecting blade width. The number of teeth per inch (TPI) is important in obtaining the finish desired and the proper feed rate.
What size blade does a Craftsman 12 bandsaw?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt. There is a Vacuum port on the back of the saw. Hook the shop vac to the port during operations. The blade width determines how tight a curve that can be cut.
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
What is the best TPI for cutting wood?
If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable. The number of teeth can be found on the blade.
How thick is a bandsaw blade?
4-6 Inches WHEEL DIAMETER RECOMMENDED BLADE THICKNESS 6-8 Inches .018″ 8-11 Inches .020″ 11-18 Inches .025″ 18-24 Inches .032″.
Is more TPI better?
Blades with a low TPI deliver faster cuts with rougher edges and are ideal for cutting wood. Blades with a high TPI deliver smooth, slow cuts and are the best reciprocating saw blades for metal.
What TPI is used to cut steel?
Cutting thinner metals, including sheet metal, requires a finer cut. Use 18-24 TPI bi-metal blades. For thicker metals such as steel pipe, angle irons, or tubing, use 14-18 TPI bi-metal blades. For aluminum, an 8-10 TPI blade is best.
