Table of Contents
The Most Common Ball Hitch Size for Travel Trailers The hitch ball used to tow most travel trailers is a 2-inch or 2-5/16-inch trailer ball. Travel trailers can weigh anywhere from 5,000 to 10,000 lbs or more. The 2-inch to 2-5/16-inch ball weight ratings provide a perfect match.
How do I know what size trailer ball I need?
You measure hitch ball size starting with the diameter of the ball itself. The diameter should be stamped into the top of the ball, or you can use a tape measure or ruler to find the measurement yourself. Use the diameter to match your trailer coupler.
What size ball do I need for a camper?
Almost all travel trailer hitches require a 2 and 5/16″ ball size to support the weight of the larger trailers. Smaller 2″ balls are common in teardrop trailers because of their lower weight rating. The correct ball size should always be used because a smaller ball could allow the coupler to bounce loose.
What is the standard hitch receiver size?
2″ x 2″ trailer hitch receivers are the most common type. Most 2″ hitches are either Class III or Class IV. These hitches are typically found on pickup trucks, SUVs, and some full-size sedans. Most trucks and SUVs that come factory-equipped with a trailer hitch have a 2″ receiver.
What size ball mount do I need?
Measure the difference Subtract the height of the trailer coupler from the height of the receiver. This difference is the amount of drop you need in your ball mount. If your hitch height is greater than your coupler height, you’ll need a ball mount with a drop.
How much weight can a 2 5/16 ball pull?
2-5/16″ trailer balls range in capacity from 6,000 up to 30,000 lbs.
Are all tow balls the same size UK?
There are two sizes: the old inch and 7/8ths ball (47.5mm) and the newer 50mm ball. If your car has a 50mm tow ball, you won’t be able to get it into a smaller coupling.
What height should my trailer ball be?
The maximum recommended hitch ball height for trailers is 25″ from the ground measured to the center of the hitch ball.
What are the different hitch sizes?
There are four standard trailer hitch sizes: 1-1/4″, 2″, 2-1/2″ and 3″. The hitch size refers to the inside dimensions of the hitch receiver. Using a standard hitch size approach allows for more versatile towing options.
What size ball does uhaul use?
All U-Haul trailers can be towed using either a 1-7/8″ or 2″ ball. The only thing you need to pay attention to is weight capacity. Smaller options such as the 4×7 Utility Trailer only require a 2,000 pound rated hitchball.
How do I know if my hitch is Class 1 or 2?
Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue weight rating of 350 pounds and a towing rating of 3,500 pounds.
Do I have a Class 3 or 4 hitch?
The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW.
Can I turn my tow ball upside down?
Can you turn a tow hitch upside down? In general yes, you can turn your hitch around, and enjoy the extra clearance.
Should a trailer be level when towing?
When towing, trailers should be level to improve stability, braking performance, and ground clearance. A level trailer will prevent poor towing characteristics, like sway, and uneven tire wear. Adjusting the trailer to be level is important for safety.
How do I know what class hitch I have?
Hitch classes are separated by their maximum weight capacity rating and receiver opening size. Classes range from I to V, and each class has its own unique capacity and applications. To find: Read the label on your hitch, or measure the size of the opening.
What size nut is on a 2 5/16 ball?
Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part # 19286, will use a 1-7/8 inch socket.
What class is a 2 5/16 ball?
Class V Hitch Ball.
Can you use a 1 7 8 ball on a 2 inch hitch?
No, it is not safe to use a 1-7/8 inch ball with a trailer that has a 2 inch ball coupler. Most couplers have an adjustment for the latching mechanism that may solve your issue.
How do I measure my ball size?
Measure the circumference of the fitness ball. Fitness ball sizes are listed in diameter (the distance straight from one side of the sphere to the opposite side, passing through the center), not circumference. Divide the circumference by pi, or 3.14, to get the diameter.
What size nut is on a 2 inch ball?
Helpful Expert Reply: The Tow Ready 2 inch Hitch Ball # 19258 includes a 1-1/8 inch nut.
What is the standard tow ball size in UK?
The European (and a lot of the rest of the world) standard towball size is 50mm with a tolerance of +0, -0.8mm (from memory) NOT 52mm as someone else stated. The US have three different sizes, 1 7/8″, 2″ and 2 5/16″. The UK used to use 2″ up until the early 1960’s.
What size is a European tow ball?
The most common hitch ball size in Europe is 50mm for which you can use part # 63912 if you need a 3/4″ diameter shank or part # EH53C-C if you need a 1″ diameter shank.
Are all Towballs the same size?
Tow Balls manufactured in all sizes from 50mm to 3? Tow Balls are designed to connect different weight trailers to the tow vehicle. The most common tow ball size is 50mm.
What happens if your hitch is too high?
If the hitch is too high for the travel trailer, it will tip backward, creating a slanted profile and an unbalanced weight distribution. You’ll be less aerodynamic this way and your trailer is more likely to catch the wind and begin to sway.
Is it better to have the trailer tongue higher or lower?
If a trailer is nose up too much, the tongue weight is low enough that the trailer may begin to sway. So in short, level is best. If level is not possible, then try to go slightly nose down. Slightly nose up can be fine, but keep an eye out for trailer sway.
How far should a hitch stick out?
There are two laws requiring a red flag or light on the end of any load sticking out 4 feet or more from the back of a vehicle, and another that says no part of the vehicle’s structure or load shall protrude more than 15 feet behind the last axle, which is meaningless in addressing trailer hitches.
