Table of Contents
The hitch ball used to tow most travel trailers is a 2-inch or 2-5/16-inch trailer ball. Travel trailers can weigh anywhere from 5,000 to 10,000 lbs or more. The 2-inch to 2-5/16-inch ball weight ratings provide a perfect match.
How do I know what size trailer ball I need?
You measure hitch ball size starting with the diameter of the ball itself. The diameter should be stamped into the top of the ball, or you can use a tape measure or ruler to find the measurement yourself. Use the diameter to match your trailer coupler.
What size ball do I need for a camper?
Almost all travel trailer hitches require a 2 and 5/16″ ball size to support the weight of the larger trailers. Smaller 2″ balls are common in teardrop trailers because of their lower weight rating. The correct ball size should always be used because a smaller ball could allow the coupler to bounce loose.
What size ball Do U Haul trailers use?
All U-Haul trailers can be towed using either a 1-7/8″ or 2″ ball. The only thing you need to pay attention to is weight capacity. Smaller options such as the 4×7 Utility Trailer only require a 2,000 pound rated hitchball.
How much weight can a 2 5/16 ball pull?
2-5/16″ trailer balls range in capacity from 6,000 up to 30,000 lbs.
What is a 3 inch trailer ball used for?
CURT 3″ trailer balls are commonly used for gooseneck towing applications, being bolted or welded onto a gooseneck hitch. They are constructed from raw, heat-treated steel for superior strength and durability, and they are rated up to 30,000 lbs.
Are all tow balls the same size UK?
There are two sizes: the old inch and 7/8ths ball (47.5mm) and the newer 50mm ball. If your car has a 50mm tow ball, you won’t be able to get it into a smaller coupling.
What size nut is on a 2 inch ball?
Helpful Expert Reply: The Tow Ready 2 inch Hitch Ball # 19258 includes a 1-1/8 inch nut.
What size is a standard trailer hitch?
There are four standard trailer hitch sizes: 1-1/4″, 2″, 2-1/2″ and 3″. The hitch size refers to the inside dimensions of the hitch receiver. Using a standard hitch size approach allows for more versatile towing options.
What size ball mount do I need?
Measure the difference Subtract the height of the trailer coupler from the height of the receiver. This difference is the amount of drop you need in your ball mount. If your hitch height is greater than your coupler height, you’ll need a ball mount with a drop.
What height should my trailer ball be?
The maximum recommended hitch ball height for trailers is 25″ from the ground measured to the center of the hitch ball.
What happens if trailer hitch is too high?
If the hitch is too high for the travel trailer, it will tip backward, creating a slanted profile and an unbalanced weight distribution. You’ll be less aerodynamic this way and your trailer is more likely to catch the wind and begin to sway.
What is the average trailer tongue height?
Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement.
What class is a 2 5/16 ball?
Class V Hitch Ball.
What size nut is on a 2 5/16 ball?
Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part # 19286, will use a 1-7/8 inch socket.
How much weight should be on a tow ball?
Your tow ball weight counts as part of your Gross Vehicle Mass when towing, so it is best to keep this in mind to ensure your vehicle is not overloaded. Typically, the tow ball weight should be 10% of the trailer’s laden weight.
Do you need a drop hitch?
The main reason that you will need a drop hitch is a simple yet important one – it’s to keep the trailer level while it is attached to your tow vehicle. Having a level trailer setup is extremely important when towing.
Do I need a weight distribution hitch?
When are these weight distributing hitches required by law? The best rule of thumb is to compare your trailer and vehicle weights. You will need a weight distribution hitch if what you are towing starts to outweigh your vehicle’s weight by one-half. For a 5,000-pound truck, that would be around 2,501 pounds.
What is the standard tow ball size in UK?
The European (and a lot of the rest of the world) standard towball size is 50mm with a tolerance of +0, -0.8mm (from memory) NOT 52mm as someone else stated. The US have three different sizes, 1 7/8″, 2″ and 2 5/16″. The UK used to use 2″ up until the early 1960’s.
What is a 50mm towball?
First of all this standard 50mm Tow ball is suitable for any trailer or caravan fitted with a 50mm head on the coupling. Secondly this Tow ball’s E.C. approved to make it suitable for light passenger vehicles registered on or after 1998.
Are all Towballs the same size?
Tow Balls manufactured in all sizes from 50mm to 3? Tow Balls are designed to connect different weight trailers to the tow vehicle. The most common tow ball size is 50mm.
