Table of Contents
Post Holes- For example: A 4×4 post (actual size 3.5″x3. 5″) has a maximum width of just over 5″ (diagonally). Therefore, the 4×4 post will likely fit into a hole drilled by a 6″ diameter auger.
What size hole should I drill for a 4×4 post?
A general rule of thumb is to dig the diameter of the hole at least 3-4 times the diameter of the post. For example, if setting 4 x 4 wood posts, dig holes 9-12″ in diameter. Posts should be centered in the hole and the posts should always have concrete under them.
What size auger do I need for fence posts?
A 12-inch auger, best attached to a heavy machine, will create a hole large enough for a 6×6 or 4×6 post and plenty of concrete. Smaller augers, like 4- or 6-inch options, are appropriate for light-duty work (like mailboxes) as well as metal fence posts for chain-link fences.
What size auger should I buy?
If you plan on only using your auger to plant plugs, for instance, then a 2- or 3-inch auger will fit your needs. If you anticipate the need to bury stakes or set small posts, then you may prefer a 4-inch auger or another, larger size.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
How far apart should fence posts be?
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
Is 4×4 post good for fence?
4×4 is the standard. And if you do it as a privacy fence, 6×6 posts stand out and make it look more substantial. I wouldn’t want it either. If you’re doing a “good neighbour” style fence you can use 6×6’s nicely.
What size hole should I dig for a 6×6 post?
A 6×6 post requires a 10″-diameter hole. Shovel a 6″ layer of gravel into the hole to provide drainage.
How big of a hole does a post hole digger make?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet.
How do you measure auger diameter?
Outer diameter is equal to the shaft diameter plus twice the strip width (inside edge to outside edge) of the flighting. If the flighting comes out of a barrel we will want to know what the barrel outer diameter is.
Can I use an auger bit in a power drill?
Whereas, auger bits can be used in a hand brace or in a power drill. They do however need to be controlled more carefully if using a power drill, since as they have a lead-in screw they tend to pull through the material, and if you are not careful can be pulled straight through and out the other side.
How deep should a 4 foot fence post be?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
Is 18 inches deep enough for a fence post?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.
How many fence posts do I need for 1 acre?
If we assume that your property is equal on 4 sides, then it is as simple as taking the square root of 43,560 square feet. This gives you 209 feet on each side, which would require 835 linear feet of fence to enclose the entire acre property (209 feet times four sides is equal to 835 linear feet).
How far apart should 4×4 fence posts be?
Too far apart and the strength of your fence is compromised; too close and your fence may look strange. For most privacy and general-purpose fences, 6 or 8 feet between posts is standard.
How long will a 4×4 post last in concrete?
How Long Will A Treated 4×4 Last In The Ground? (Explained) A treated 4×4 will last 20 to 25 years in the ground if the conditions in the soil and climate are favorable. That number could increase to 40 to 75 years if you install the treated 4×4 in a cement ring rather than the soil.
How do I select a 4×4 post?
When shopping for 4×4 pressure treated posts, look at the ends. If growth rings start near the center of the post and expand outward, it’s almost certainly made from a peeler core. If the rings are off center, it’s not the log’s center. Our suggestion is to buy 10-ft.
What size fence post do I need for a 5ft fence?
Use 4in x 4in posts for fences of 5ft and over and 3in x 3in posts for anything under 5ft.
