Table of Contents
What size are faucet threads?
Valve and Faucet Fittings The two most common are 3/8- and 1/2-inch compression or male pipe thread. Faucets connectors aren’t completely standardized, but most have 1/2-inch male pipe thread connectors.
How do I know what size my faucet cartridge is?
Use a caliper or ruler and measure the cartridge. Do this by measuring from the base to the tip (from seat to splines). Pay attention to the length tier of your cartridge (Lengths range from 1–12).
Are faucet cartridges interchangeable?
Cartridges aren’t interchangeable among different faucets, so if you decide you need a replacement, you need to know its part number so you can order it from your plumbing supplier or online. That number is usually available on the manufacturer’s website in the online version of the owner’s manual for your faucet.
Do all Moen faucets have the same cartridge?
There is absolutely NO difference between the Moen 1222 vs 1222B replacement cartridges. They are both the replacement part cartridge for the Posi Temp Moen shower valve. They are made from the same parts, the only difference is their packaging and model number.
What type of thread is on a faucet?
The connection to the faucet would be half-inch iron pipe thread, and the connection to the shut-off, (called a stop), would be either 1/2 or 3/8 compression. Laundry boxes have a non-tapered thread on their valves, but faucets nearly always have a tapered thread in this part of the world.
Are all faucet threads the same?
The United States use different thread sizes: 15/16″-27 for standard-sized male and 55/64″-27 for standard-sized female threads. Using faucet aerators may help meet local regulations and construction standards such as ASME A112.
How do I know what shower cartridge I have?
Easiest of all is when it says the brand name right on the faucet face. But you should also look at the bottom of the faucet, on the handles or on the round plate behind the handles. If you find a brand name, go to the manufacturer’s website and call the contact number for assistance.
How do I know what bathroom faucet I have?
The most obvious and quickest solution is to look for a logo — the manufacturer’s symbol — that identifies its faucets. Each manufacturer has a distinctive logo that sometimes appears on the escutcheon — the plate beneath the faucet — the body of the faucet, the spout itself or somewhere on the handle.
Are tap cartridges universal?
Compatibility. Our replacement valves & cartridges are compatible with many different makes of popular taps including Astracast, Blanco, Brev, Bristan, Carron, Crosswater, Deva, Franke, Hudson Reed, Jacuzzi, Mayfair, Ocean, Sagittarius, Tapmate, Tre Mercati, Ultra and many more.
Are Moen and Delta cartridges interchangeable?
The cartridges are not interchangeable between different taps. So if you decide you need a replacement, make sure you know the part number so you can order it from your plumbing supplier or online. This number is usually available on the manufacturer’s website in the online version of the faucet’s instruction manual.
Is there a difference between Moen 1225 and 1225B?
The difference between the 1225 and the 1225B is with the packaging. The cartridges are exactly the same, the package in which the part is displayed is different.
What is the difference between Moen cartridge 1224 and 1224b?
Answer: The 1224 is packaged in retail packaging sold at retail stores. The 1224b is not in pretty retail packaging but just the cartridge only in a bag. All double handle faucets from Moen use the same cartridge.
Are faucet fittings NPT?
Plumbing fitting are commonly referred to as “NPT”, however, in reality, nearly all faucets are actually “NPS”. NPS is the North American “STANDARD” for faucets, regardless of brand, style, application, etc. Outside North America, BSP is the most commonly used standard.
What are FIP threads?
FPT stands for Female Pipe Threads and FIP stands for Female Iron Pipe which both indicate a female fitting with NPT threads.
Is my faucet male or female?
If your faucet has threads on the outside, then it is “male”, and you should use a “female” aerator. If your faucet has threads on the inside, it is “female”, and you should use a “male” aerator.
What is the standard faucet size?
After researching, I wrote this article to share my findings with you. What are the standard faucet hole sizes for kitchens and bathrooms? The standard faucet hole sizes for kitchens and bathrooms are 1 3/8″ (1.375 Inches or 34.925 mm) in diameter unless otherwise mentioned in the specification.
Are all shower diverters the same?
There are three different types of shower diverters: Three-valve diverter – These are usually found when there are separate knobs for hot and cold water. Two-valve diverter – This type of diverter is usually found with a single-handle faucet.
What is the difference between Moen 1222 and 1222B?
There is absolutely NO difference between the Moen 1222 vs 1222B replacement cartridges. They are both the replacement part cartridge for the Posi Temp Moen shower valve. They are made from the same parts, the only difference is their packaging and model number. The “B” in the 1222B model number stands for Bulk.
Are shower valves universal?
No, shower valves are not universal. You can’t mix other manufacturers for rough-in valves and trim. Even within one specific manufacturer, you may not be able to mix trim and rough-in valves.
What is the difference between Moen 1200 and 1225 cartridge?
Moen 1200 has an all-round brass design which ensures longevity in the long run. But in terms of performance, Moen 1225 can offer you better performance with its 1GPM water discharge rate. While Moen 1200 does not support Posi-Temp shower valves, Moen 1225 is compatible with almost any faucet.
How do I know if my Moen cartridge is bad?
How do I know if my Moen cartridge is bad? Leaking from the handle, tub spout or shower head when off. Difficult to open or close shower valve. Difficult to turn shower handle. Inability to get very hot or very cold water.
How do I find my Moen faucet model number?
Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).
Where do I find my Delta faucet model number?
Where can I find my model number? The model number is on the packaging as well as the Installation instructions provided with your faucet.
What faucet brand has a red and blue circle?
The Delta faucet has a red/blue button.
Are hot and cold tap cartridges the same?
In other words both the Hot and Cold valves are the same but open in mirror directions so please select the valve you require according to how your taps work. If you have a two lever ‘filterflow’ or ‘aquifier’ tap then the hot side has a valve and the cold side has a diverter cartridge for the cold and filtered cold.
What is the standard tap washer size in Australia?
How do I know what size washer I need for my tap without taking it apart? If your tap is inside it is generally a 13mm washer that you would require. If your tap is outside it could be a variety of sizes. Victoria South Australia Northern Territory and Tasmania generally use 13mm tap valves for their garden taps.
Do all taps have cartridges?
All modern taps, and some traditional taps will have ceramic disc cartridges.
