Table of Contents
Step 5: Match your square footage to an HVAC size chart Home Sq Footage Air Conditioner Size (tons) 600 – 1,000 square feet 1.5 tons 1,000 – 1,500 square feet 2 tons 1,500 – 2,000 square feet 3 tons 2,000 – 2,500 square feet 4 tons.
How many BTUs do I need for a 2000 square foot home?
90,000 BTU Home Size (Heating): Standard Climate Very Hot Climate 1,000 square feet 45,000 BTU 30,000 BTU 1,500 square feet 67,500 BTU 45,000 BTU 2,000 square feet 90,000 BTU 60,000 BTU 2,500 square feet 112,500 BTU 75,000 BTU.
How much is a new AC unit for a 2000 square foot house?
Central air conditioning for a 2,000 square foot home is in the $3,000-$5,000 range. A central furnace for a 2,000 square foot home costs around $2,500-$7,500.
How many sq ft will a 2 ton AC unit cool?
And each half-ton will cool an estimated 750 to 1,000 square feet of space.How Air Conditioner Sizes are Measured. Air Conditioner Size Home Size 2-ton unit (24,000 BTUs) 2,000 square foot home.
How many square feet does a 3 ton AC unit cover?
3-ton is equal to 36,000 BTU. If you apply the 20 BTU per sq ft rule of thumb, you can see that a 3-ton air conditioner cools about 1,800 square feet spaces.
What size air conditioner do I need for a 2400 square foot home?
The answer to the question, “what size AC unit for 2400 square feet?”, would be, is 60,000 BTUs or 5 Tons. It’s possible to fall between unit sizes, so if that’s the case with you, then you should choose the next higher size. That way, you can be sure that the AC unit can still cool a given area sufficiently.
What size furnace do I need for a 2000 square foot home Canada?
A mid-sized home of 2,000 square feet would need approximately 50,000 to 60,000 Btu to heat it properly. With a less efficient furnace operating at 80 percent efficiency this would require a 60,000- to 72,000-Btu furnace.
How much does it cost to cool a 2000 sq ft house?
A 2500 square foot home (which is close to the U.S. median house size of 2,436 square feet) costs $133 to cool over the summer months, on average.Share this article. Square Footage Cooling Cost 1000 $72.06 1500 $129.23 2000 $125.52 2500 $133.14.
How much does it cost to install central air in a 2000 square foot house?
Installing a central air conditioner into a 2000 square ft. home with an existing forced air furnace heating system (that has all ductwork installed properly) would cost between $3,000 to $4,000.
How many sq ft will a 5 ton AC unit cool?
2,400 – 3,000 sq ft AC Unit Capacity (Ton) Cooling Capacity Square Feet 3 Ton 1,400 – 1,600 sq ft 3.5 Ton 1,650 – 1,800 sq ft 4 Ton 1,850 – 2,100 sq ft 5 Ton 2,400 – 3,000 sq ft.
What size air conditioner do I need for a 2300 square foot home?
ZONE 1 ZONE 5 2.5 Tons 1201 – 1500 sf 1401 – 1650 sf 3 Tons 1501 – 1800 sf 1651 – 2100 sf 3.5 Tons 1801 – 2100 sf 2101 – 2300 sf 4 Tons 2101 – 2400 sf 2301 – 2700 sf.
What size AC unit do I need for a 1800 sq ft house?
Here’s some math: You need around 20 BTUs per square foot, which is equivalent to 0.0016 tons. For example, a 600-square-foot space requires a 12,000 BTU or 1-ton unit. By those calculations, an average 1,800-square-foot house would need a 3-ton central air conditioning unit.
What size air conditioner do I need for a 2200 square foot house?
For example, a 2,200 sq. ft. house divided by 600 = 3.6666. So you would want to install a 3.5 ton unit.
Is the a big difference between a 2.5 ton and 3 ton AC?
The general guideline is a 2.5 ton unit for a home that’s 1,500 to 2,000 square feet. A 3 ton unit is ideal for a home that’s 2,000 to 2,500 square feet.
Can you replace a 2 ton AC unit with a 3 ton?
Simple answer: yes. But that really depends on the size of you house and its condition. If the 2 ton unit is working as designed but seems to run continuously without satisfying the thermostat setting, then it might be undersized and replacing it with a 3 ton unit might be the answer.
What size AC do I need for 1500 square feet?
Therefore, if your home is 1,500 square feet, your air conditioning unit should be 3.5 to four tons.
Is it better to undersize or oversize AC?
A system properly matched to cooling loads, or even slightly undersized, will dehumidify better because it will run longer, exposing cold coils to the damp airstream for more hours of the day; removing more water (aka, “humidity”)from the airstream.
Is a 2 ton AC big enough?
For those of you that don’t understand the way AC systems work, a 2-ton unit typically provides cooling for about 900-1,400 square feet of space – give or take.
What ton AC do I need?
To estimate your AC tonnage needs, multiply the number of square feet you’re cooling times 25. This equals the total number of BTUs you need to adequately cool your space. Next, divide that number by 12,000 to determine the tonnage capability you need in your new air conditioning unit.
How many square feet can 18000 BTU cool?
Air Conditioner BTU Chart; With 12,000 BTU (1 Ton) Room Size Example Cooling Capacity (BTU): Room/Area Size: 14,000 BTU air conditioner room size: 600-700 sq ft 16,000 BTU air conditioner room size: 700-800 sq ft 18,000 BTU air conditioner room size: 800-900 sq ft 20,000 BTU air conditioner room size: 900-1,000 sq ft.
How big of a furnace do I need for a 2000 sq ft house?
A mid-sized home of 2,000 square feet would need approximately 50,000 to 60,000 Btu to heat it properly. With a less efficient furnace operating at 80 percent efficiency this would require a 60,000- to 72,000-Btu furnace.
How do I calculate air conditioner size?
To calculate the size, simply multiply the length times the width of the room or area to be cooled. Then, as a practical number, multiply that total times 25 BTU.
