What Scale Is Battletech - Seniorcare2share

3D miniatures in BattleTech generally uses a 1/285 or 6mm scale, though the consistency of scale can vary between or even within certain miniature lines. Miniatures in a different scale have been made to support both MechWarrior: The BattleTech Role Playing Game and BattleTroops.

What MM scale is BattleTech?

I’ve heard that Battletech is 1/285 Scale, that it’s 6mm, that it’s N-Scale, and some have even suggested now it’s closer to 10mm. Given that there are “old-style scuplts” and “new-style sculpts”, IWM’s miniatures are hard to gauge.

What train scale is BattleTech?

Battletech is considered to be 1:285 or 1:300 in scale.

What scale is MechWarrior?

Lance McMillan According to WizKids (who produce the game), Mechwarrior is supposed to be compatible with “N” scale model railroading scenery/buildings. “N” scale is officially 1:160 scale. Take that with a grain of salt, as many of the figures in the game clearly do not conform to that standard.

Is BattleTech in the same universe as MechWarrior?

MechWarrior is a series of video games set in the fictional universe of BattleTech.

Is BattleTech 6mm scale?

What scale is 15mm?

Scales Figure height Scale foot Scale ratio 8.0 – 9.14 mm ≈1.524 mm 1:200 scale – 1:182 scale 10 mm ≈1.667 mm – ≈1.9 mm 1:160 – ≈1:182 12 mm 2 mm ≈1:152 15 mm ≈3 mm ≈1:100.

What size are BattleTech bases?

These hex bases are the exact size of the Battletech board hexes and will fill the board hexes exactly. If you would like hex bases that are just slightly smaller than the board hexes you should get 1.125″ hexes.

What does 6mm scale mean?

1:285 scale or 6 mm figure size is a US Army scale introduced in the late 1960s, and used for wargames and some scale model dioramas. It is used in miniature wargaming to depict large battles in a relatively small gaming area.

How big is a BattleTech hex?

On a standard mapsheet the hex size as originally printed is approximately 1.25 inches and depicts terrain 30 meters (roughly 100 feet) across. As published, BattleTech mapsheets have terrain, including vegetation, hydrologic features and topography marked.

How tall are Battletech models?

The combat units are roughly 12-metre-tall (39 ft) humanoid armored combat units called BattleMechs, powered by fusion reactors and armed with a variety of weapons.

How tall are mechs in Battletech?

A BattleMech (often abbreviated ‘Mech, although that could technically also refer to IndustrialMechs) is an armored combat vehicle of roughly humanoid shape, standing 8 to 14 meters tall and typically massing from 20 to 100 tons.

What scale are MechWarrior Miniatures?

Yes, as they said the rules are designed to work with anything from 2mm to 10mm figure scale. MechWarrior figures are towards the 10mm end of that scale, but there should be absolutely no problem using MechWarrior clix with the rules.

What happened to MechAssault?

MechAssault developer Day 1 Studios worked with FASA to create two games for Xbox set in the BattleTech universe, but after the sequel, Microsoft decided to pull the plug on the franchise.

Which came first Robotech or BattleTech?

The story of these rival franchises is complicated, but here’s the short version: There were three related Japanese mecha animes in the early 1980s, of which the American Robotech series was an explicit, licensed adaptation. That licensing deal went through before BattleTech began in the form of a 1984 board game.

How long is a turn in BattleTech?

BattleTech[edit] The BattleTech game board (or mapsheet) is based on a hexagonal grid with each hex representing 30m of ground space. Each turn represents 10 seconds of time.

What scale is Dropzone Commander?

Dropzone Commander is a 10mm scale wargame, in which battles can be waged from small skirmishes, to epic battles which see huge waves of Dropships descend upon the battlefield.

What happened Ral Partha?

Ral Partha Legacy LTD., 2020–present In July 2020, Iron Wind Metals retired the “Ral Partha – A Division of Iron Wind Metals” brand and licensed the Ral Partha era fantasy and historical miniatures to “Ral Partha Legacy Ltd.” which owns the Chaos Wars games.

What does 54mm scale mean?

A 54mm figure roughly equates to 1/35 scale (actually 1/34), but could be used for 1/32 scale, too. A 25mm figure passes as 1/72 scale. That means, if you have a 1/35 scale tank, then the figures should also be 1/35 scale (54mm).

What scale is 10mm wargaming?

10mm figures are roughly 1:160 scale, they should stand about 10mm tall foot to eye (there has been a small amount of scale creep and our ranges tend to be between 10.5mm to 11mm foot to eye.

How big is a 75mm miniature?

A 75mm figure height works out as being 1.8m (just under 5′ 11″) and a 77mm figure works out as 1.85m (a touch under 6′ 1″) in 1/24 scale. *Nominal sizes – 28mm, 54mm etc.

What scale is 2mm?

2mm scale (1:152 scale) is an even more accurate version of what we commonly refer to as N gauge. It refers to 2mm of the model being equivalent to 1ft in real-life. 2mm scale is often labelled Finescale N gauge.

What is 20mm scale?

Very close to wargaming 20 mm figure scale(20mm is actually 1:80.5).

Is 40K 28mm or 32mm?

Warhammer 40,000 range (from Games Workshop company): The scale of Warhammer 40K miniatures is mostly 1:56 (28mm / 32mm) scale, with Heroic scale proportions.

How far is a hex in Battletech?

In standard tabletop play 1 hex is 30 meters, 1 turn is 10 seconds.

What size are HeroScape tiles?

Re: What size Hexes are the standard maps and what size are hero scape? HeroScape is 1.75 inches side to side. I use them on a Hotzmat for great effect.