Table of Contents
A random orbital sander is a specialized tool that sands wood in an elliptical pattern. It’s the most efficient sander to use when refinishing a deck, as they’re easy and practical to use.
Can a floor sander be used on a deck?
Sanding your deck with a floor sander It is possible to use a floor sander to sand your deck, although we still advise you to use a hand-held belt sander for best results. Just make sure to go slow and steady to get an even finish, and make sure all parts of the deck have been sanded down.
Should I use a belt sander or orbital sander for deck?
Remember that woods used on decks are typically soft-wood species. Belt sanders, whether hand-held models or large uprights, tend to gouge softwoods, so an oscillating or random orbit sander is usually the better choice. Make sure your deck is thoroughly dry before you sand.
What to use for sanding a deck?
Sand the Deck Use 60- or 80- grit sandpaper on the main deck boards, and use 80- or 100-grit on the handrails. After sanding, vacuum the deck thoroughly to ensure that dust does not settle on the new finish.
Can I sand my deck with a belt sander?
How do I sand my deck? Use a belt sander with 36 to 40 grit belts for the bulk of your deck, and an orbital sander with 40 grit for the edges. Any tight spots you can hit with a detail sander. Once your deck is all stripped back with the 36 grit, go over it once more with an 80 grit sandpaper just to smooth it out.
How much does a deck sander cost?
Most homeowners spend between $210 and $350 for a 200-square foot deck, which takes about seven hours to sand. If you choose to sand your deck yourself, you’ll need to purchase an orbital sander, which costs $75 on average.
Is it better to sand or power wash a deck?
DO sand your deck before sealing. At that point, lightly sand the surface to remove splintery or fuzzy patches caused by pressure-washing the deck. A pole sander with 80-grit sandpaper will suffice; a power sander is overkill. Then seal the deck to protect from cracking, cupping, and warping.
Can you sand a deck after it rains?
2. Now you can start sanding. It’s important that you make sure there is no chance of rain when you begin to sand. If the wood gets wet after it’s been sanded, but not before you’ve had the chance to stain or paint it, you’ll be back to square one — you’ll need to wash and sand it all over again.
When should I sand my deck?
Sanding a deck before staining provides a clean, smooth, and absorbent surface for stain and paint to adhere to. It is a key part of cleaning and preparing a deck for finishing. Most decks take two passes with a power sander; the first with 20 to 50 grit and the second with 60 to 80.
Can you sand a pressure treated deck?
Sanding pressure-treated wood is actually contraindicated because, as Sand & Stain warns, you’ll end up partially removing the protective coating created by the pressure treatment, and the wood will look terrible.
Should I use a drum sander on my deck?
Use an Orbital Sander—Not a Drum Sander An orbital flooring sander is safe to use on decks, and it’s faster and easier than hand sanding. A flooring drum sander removes too much material too quickly to use safely on a deck. Most decks are made from softwoods, and the surface is more uneven than an interior floor.
What is the difference between an orbital sander and a palm sander?
As compared to a palm sander, orbital sanders are more massive tools, which means that palm sanders are smaller and more lightweight. The motions of orbitals are Circular and orbiting, and palm sanders only have orbiting motion. If you want to work with larger pieces, orbital sanders are better than palm sander.
How do you repaint a deck?
How To Refinish A Painted Deck Inspect deck surfaces for paint failures. If deck paint is holding, no need to strip old paint. Remove all peeling paint down to bare wood. Scuff sanding is good, even for old deck paint. Rinse off using low pressure garden hose. Let dry couple days.
Can you sand a deck with a palm sander?
Sand the entire deck with 80-grit sandpaper. Use a palm sander and 80-grit paper to sand in corners and under rails where the larger machine won’t fit. This is a good time to sand the railing with a palm sander, if you plan to refinish it. If so, you’ll need two passes, one with 80- and one with 100-grit paper.
Should I pressure wash deck before staining?
There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.
How many coats of stain do you put on a deck?
The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain.
Is it too late to stain my deck?
To keep your deck looking great and to help it last as long as possible, you should stain it at least every three to four years. Fall is the perfect time to take on the task of staining your deck. Not only will you not roast in the sweltering summer temperatures, but the cooler fall weather is ideal for staining.
