Table of Contents
What speed should I set my variable speed pool pump?
If you are running your pool pump to filter and turn your water over, we recommend using the middle and lower speed settings. For example, for the first few days, you might run the pump at 2500 RPMs to see what your pool looks like. Next, you might dial it down to 1600 RPMs.
How many RPMs should my pool pump run at?
Suction cleaners typically run at around 2200-2400 RPM. Heaters require 20 to 40 Gallons Per Minute (GPM) so might run at around half speed or a little higher. You would probably want to run your Spa at up to full speed, 3450, for maximum effect.
What should my pool pump be set on?
The “Filter” setting circulates water through the sand or DE media, then out the filter through the return port to the pool. This is the standard setting for normal pump and filter operation. The “Backwash” setting redirects the flow of water backwards through the filter media to flush out contaminants.
How many watts does a variable speed pool pump use?
In the field, a variable speed pump set at a flow rate of 22 gpm will draw 116 watts and turn the pool over in 19 hours but only consume 2.2 kWh of electricity.
What are the best hours to run your pool pump?
If you are doing the split day and night pool pumping, the best thing is to start at 11 am to around 4 pm when the sun is hot so that it can burn off the chlorine. Another midnight schedule will help you get a good chlorine build-up ahead the next day.
Are variable speed pumps worth it?
A Worthwhile Investment Even at a higher initial cost than single-speed pumps, the best variable speed pumps are the superior investment because they offer prolonged filtration, more water turnover, and lengthier sanitation durations. These benefits make it easier to maintain your pool.
Is it better to run pool pump at night?
It’s always best to run the pool pump during the hottest times of the day. The sun is one of the causes of chlorine depletion in your pool. If you run your pump during the night, then the sun has all day to attack the chlorine that’s standing still in your pool. That can cause algae fast!.
How many hours should I run my pool pump in the winter?
Generally, pumps need to be run for 6 to 8 hours at a time for proper circulation. Another factor to consider when running the pump is debris – if debris is an issue in your pool, you may need to run the pump longer. Running a pump for only 3 hours every 24 hours means there is 21 hours for debris to build up.
Should I run my pool pump in freezing weather?
Run your pool pump continuously when temperatures are near or below freezing. You don’t need to run your heater, moving water likely will not freeze. Water feature pumps should be run and valves should be open. Alternately, you can cover and drain the pump and pipes.
What is the advantage of a variable speed pool pump?
Variable speed pumps save money and energy because the motor spins at lower speeds, which requires fewer amps and watts. Compared to a single speed pump, you can save 50-80% just by running the pump for longer hours each day, but at lower speeds.
How much do you save with a variable speed pool pump?
A variable speed pool pump could save you up to 90%* on your energy costs compared to a conventional single- or two-speed pool pump. They are often quiet when running and many offer built-in programming features and better filtering capabilities.
How many amps does a variable speed pool pump use?
IntelliFlo i2 Variable Speed Pool pump is hydraulically engineered to provide maximum performance on a 15-amp breaker.
How many hours should a pool pump run in the summer?
So how long should the average pool pump run during the summer? To make this process simple, it easier for homeowners to follow this basic guideline: for every 10 degrees of outdoor temperature run your pump for one hour. So if the average temperature is 60 degrees, run your pump for 6 hours.
Does it hurt to run pool pump 24 hours a day?
Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day. For pool pumps with D.E. filters, operating hours for normal weather and climate conditions tend to be anywhere from between 7 to 8 hours if you want to ensure proper filtration.
Do you leave pool pump running all the time?
Although it’s generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. One way to keep control of the time you run the swimming pool pump is to run it several times a day for short periods of time.
Should I switch to a variable speed pool pump?
With a variable speed pump a pool owner can circulate their water at lower flow rates for a more prolonged period of the day without added energy consumption. This study by the National Renewable Energy Laboratory confirms that variable speed pumps are significantly more energy efficient than single speed pumps.
Should I replace my pool pump with variable speed?
Upgrading to a VGreen variable speed motor will lower the cost of pool ownership through energy savings of up to 80% without replacing the pump. These motors run cooler, quieter and last longer. Owning a pool with a variable speed motor just became more affordable and is better for the environment.
When would you use a variable speed pump?
The high setting is helpful for specific cleaning tasks, while the low setting is suitable for just pool filtration. Variable speed pumps enable you to control the pump’s speed precisely between the low and high-speed settings. Think of this type of control like the one you use to dim lighting in a room.
