Table of Contents
A dust cover, also called backing paper, is a thin sheet of paper attached to the back of picture frames. Professional picture frames will often refer to using this framing material as a “dust seal,” as the adhered paper prevents dust from entering the picture frame.
What material is used for picture frame backing?
Depending on what you’re framing; you can use cardboard, standard foam board, acid free foam board, mat board, hard board, chip board, easel backs, or what the heck, you can even use wood.
What is backing paper?
Backing sheets are usually made of paper, although film may be used in order to reduce the overall thickness of a sheet of labels and to provide a base that is stronger and more durable – which is particularly important during the die cutting process – than paper.
What is framing paper called?
In the picture framing industry, a mat (or matte, or mount in British English) is a thin, flat piece of paper-based material included within a picture frame, which serves as additional decoration and to perform several other, more practical functions, such as separating the art from the glass.
How do you cover the back of a picture frame?
How It’s Done: Step 1: Place your framed photo face down on a clean surface. Step 2: Apply double sided tape to the back edges of the frame, making sure to cover the entire perimeter. Step 3: Cut a length of kraft paper that’s at least 6 inches larger than the frame on all sides.
How do you put backing paper on a frame?
Apply a continuous line of double sided tape with ATG gun to the back of the frame about 1/8-inch from the outer edge. Apply the cut backing paper by squaring it to the far end of the frame and press firmly to attach the tape. Pull the loose sheet tightly and attach at center of opposite end by pressing firmly to tape.
How do you make a backing frame?
Apply a strip of ATG tape to the back lip of the frame, all the way around the perimeter. Flip the frame over onto a piece of kraft paper that is slightly larger than the frame (or Tyvek if framing something that will be in a high-moisture area). Press down firmly to be sure the paper sticks. Flip the frame back over.
What is backing paper made of?
Paper Backing Paper backings are made from pulp and are used mostly on vinyl and vinyl coated papers. These backings are used mostly for residential and specialty wallcoverings.
Why acid free paper is good for artist?
The acid will break down the chemical compounds within the paper, resulting in what is commonly seen as yellow and brittle newspaper clippings. This damage can be avoided by using acid-free archival paper, mat materials, and framing supplies.
What’s the back of a picture frame called?
We’ll talk more about the inside edge on the back of the frame (also called a rabbet) a little bit later on the Cutting Rabbets page, and how to create one, but basically it’s the “shelf” in the back of the frame that holds the glass, mat, document and backboard in place.
What tape do picture framers use?
1 Sealing The Frame There are two types of tape used:self adhesive;gummed. Gummed tape is the traditional paper tape, and the only one suitable for conservation work and museum work, is gummed paper tapes.
What is backing board?
Backing boards can be described as any stiff material fastened to the reverse of a painting’s stretcher or strainer and whose function is protection from various physical and environmental hazards.
How do you hold a picture into a frame?
The most common work-around are off set clips, metal brackets with offsets of 1/8”, ¼” or ½” that screw into the back of the frame and reach up to overlap the stack. In fact, ½” offset clips are deep enough to hold stretched canvas in most frames and are a quick, easy solution.
What is sticker paper backing?
It is called a release liner, backing paper, carrier or glassine and the link explains it as follows: The release liner is commonly made of paper and is silicone coated on 1 side (occasionally 2) to enable the label to be removed cleanly from the liner.
What is silicone paper?
Silicone release paper is a very handy paper that will not stick to art work. This parchment like paper will withstand heat applications without sticking or damaging art work, and is commonly used in dry mounting presses, release liners when working with waxes and adhesives, and for wrapping tacky or wet artwork,.
What is self adhesive paper used for?
Self-adhesive paper is a special kind of paper containing the adhesive strip underside, allowing on temporary sticking and tearing off products constructed on its basis, as well as to documents and other surfaces. Special glue technology allows to use products without any marks of sticky glue remaining on the surface.
Is regular printer paper acid free?
Truth is that around 80 percent of commercial printing papers today are acid free– alkaline– or permanent.
What is the permanence of paper in art?
OTHER ART MATERIALS: Paper permanence refers not only to the acidic level of the finished sheet of paper, but also to factors that affect the paper after it is made, like what comes in contact with the sheet (paints, oils, fixatives, etc).
Is brown paper acid free?
Being acid free the buffered paper contains no harmful acids that commonly occur in brown Kraft paper.
What is the best material for a picture frame?
Acrylic is lighter than glass, thus more affordable to ship. It also is more durable, which makes it ideal for frames ordered online. Glass is heavier and more fragile, but some people prefer it for the aesthetic, or because it’s less susceptible to scratching.
What is canvas backing?
A backing board is the last piece to go into a framed artwork. Behind the glazing (glass or acrylic), mat, and print, the backing board separates the print from the open back of the frame, and may also be the surface onto which the print is hinged (attached).
Can you use painters tape for framing?
Masking tape should NEVER be used in any quality framing job. Artwork should NEVER be attached directly to the front mount. Masking tape should be used for keeping paint off windows, not for framing!.
Is framers tape double sided?
Adhesive transfer tape, or ATG tape, is a type of double-sided adhesive used extensively in picture framing to secure mat boards and dust covers. This tape creates a strong, durable bond with plastic, metal, vinyl, cloth, and other materials, making it ideal for framing and even other home projects.
