Table of Contents
A thick roller holds more paint, making it easier to work the paint into the rough surface faster. You can buy a popcorn roller cover specialized for acoustic surfaces. These rollers have a very thick nap, usually at least 9/16-inch. Another roller cover that performs well on rough surfaces is one with a 3/4-inch nap.
What roller do you use for popcorn ceiling?
A paint roller for a popcorn ceiling would be any roller pad/nap roller that is thick enough to properly apply paint to a textured ceiling. What is this? A regular roller pad might work on some popcorn ceilings, but you will have to load it up with a lot of paint, and the job will definitely go a lot slower.
What kind of brush do you use to paint a popcorn ceiling?
Due to the size and needs of the project, you’ll need a paint brush and a roller brush in order to paint a textured ceiling efficiently. The regular paint brush is specifically for cutting in the edges and corners of your ceiling, while the roller should be used to paint the main surface of the ceiling.
What kind of roller should I use for a textured ceiling?
When it’s time to roll, use a low-nap roller for smooth ceilings and a 1/2-inch or 3/4-inch nap for textured ceilings. An extension pole attached to the paint roller frame helps you reach the ceiling without a ladder.
How do you paint a popcorn ceiling?
Can I use a roller on popcorn ceiling?
Textured ceilings can be painted using a brush and a thick roller or with an airless sprayer, but using a sprayer is by far the easiest and most efficient way to get the job done fast.
What size paint roller nap should I use?
1/4-inch nap is best for very smooth walls, ceilings, cabinetry, and other surfaces without texture, including metal. 3/8-inch nap is good for lightly textured surfaces, including most interior walls. 1/2-inch nap is a good length for moderately textured walls, paneling, and painted brick or concrete.
How do you paint popcorn ceiling with a roller?
Pour a quantity of paint into a deep rolling tray. Slip a looped roller skin on a roller and screw the roller to an extension pole. Immerse the roller in the paint, get it completely covered, and roll the paint onto the ceiling.
What is the cheapest way to cover a popcorn ceiling?
Wooden ceiling planks (or tongue and groove paneling) are another stylish and affordable option for covering up the popcorn ceiling in your home and are quite simple to install, as well.
Why are popcorn walls bad?
Possible Asbestos Exposure Before it was banned by the Environmental Protection Agency (EPA) in 1977, asbestos was used in textured ceiling paint in most homes. If your ceiling tests positive for asbestos, it’s best to call a professional to remove popcorn walls or ceilings.
What is the best roller nap for ceilings?
Ceilings and Drywall – Medium 3/8″ nap roller covers work best. Walls, Wood, and Metal – Small 1/4″ nap roller covers or foam rollers will produce the smoothest finish. Light to Medium Textured Surfaces – Microfiber rollers are best.
What is considered a short nap roller?
For smooth surfaces such as new drywall, choose a shorter nap (3/16” or 1/4″) to evenly apply the paint. Because a shorter nap picks up less paint, it is common for some painters to “bump up” to a longer nap for increased production.
How do you smooth popcorn ceilings?
When scraping popcorn ceilings, you’ll want to use a 4-inch utility knife or a drywall knife to chip away at the texture and create a smooth surface. You’ll probably need to skim it with a thin layer of joint compound to smooth out imperfections, then sand it smooth before repainting.
Can I just paint over popcorn ceiling?
One coat can refresh nearly anything—including popcorn ceilings. Popcorn ceilings—also called textured ceilings, stucco ceilings, or cottage cheese ceilings (yes, really)—were a popular alternative to troweled plaster in the mid-20th century.
Is popcorn ceiling difficult to remove?
Removing a popcorn ceiling is a fairly easy and affordable DIY project that just requires some time and muscle. Should your ceiling need more TLC than just scraping and painting, there are also options for covering up popcorn ceilings, such as wood paneling, pressed tin tiles, or new drywall.
How do you test popcorn ceiling for asbestos?
You can test a popcorn ceiling for the presence of asbestos by carefully scraping a small sample into a plastic bag and having it tested at an EPA-accredited lab. While homeowners are allowed to remove a popcorn ceiling that contains the material, a professional asbestos remediation company should do the job.
How do I choose a nap roller?
TIP 2: Choose a roller’s nap length based on the roughness of the surface: a ⅛- to ¼-inch nap for smooth surfaces, like plaster; a ⅜- to ½-inch nap for lightly textured drywall; and a ¾-inch nap for textured surfaces, like stucco or brick.
Are knit or woven rollers better?
Knit versus woven? For smoother lint-free results with all paints, use a woven roller fabric—especially with higher-sheen coatings. For greater pickup and release (faster application), try a knitted fabric when using flats or eggshell paints.
Is it OK to cut in one day and paint the next?
But you’ll get better results if you cut in just one wall, then immediately roll out the wall before cutting in the next one. That’s because if you roll out the wall right away, while the cut-in paint is still wet, the cut-in paint and the wall paint will blend much better, reducing the chance of lap marks.
Do I need to prime popcorn ceiling before painting?
Before you paint your popcorn ceiling, you need to prime it to ensure proper paint adhesion. If the ceiling is old, you may need a stain-blocking primer to prevent old stains from bleeding through. Kilz makes a primer especially intended for this purpose.
