Table of Contents
A 3/8-inch nap is versatile enough to work on most surfaces, if you are painting interior that has been painted before or wood on the exterior of a house this is the one for you. We also use 3/8-inch naps for staining decks.
What kind of roller do you use to paint a deck?
What’s the right roller for the job? For staining a deck, go with a standard 9 inch napped paint roller. A napped roller will apply the stain in much the same way as a lambswool pad, but in a much more efficient way.
Can you use a roller to paint a deck?
Roller: The best tool for applying new paint is a paint roller. If it’s reachable, paint or seal all deck boards’ sides to protect the decking from moisture.
What is the best nap for paint rollers?
¼-inch nap is best for very smooth walls, ceilings, cabinetry, and other surfaces without texture, including metal. ⅜-inch nap is good for lightly textured surfaces, including most interior walls. ½-inch nap is a good length for moderately textured walls, paneling, and painted brick or concrete.
Should I roll or brush deck paint?
Rolling can allow you to pain at least two times faster than painting with a brush. You will also find that you can paint hard-to-reach areas, especially those tall areas on your deck. Rollers are very inexpensive to get, and they offer very good coverage on your deck, no matter if you are using stain or paint.
What does nap mean for paint rollers?
Each roller has a different thickness of fabric or “nap”, specifically designed for different surfaces around the home. The thicker the nap or length of fabric, the more paint a roller will hold. The thicker the nap, the rougher the surface the roller is designed for.
How thick should a nap roller be?
The nap is determined by the surface texture to be painted: 1/4-inch, 3/16-inch: For very smooth surfaces like metal doors and plaster. 3/8-inch, 1/2-inch: For smooth and semi-smooth surfaces like drywall. 3/4-inch: For semi-rough surfaces like wood or a textured ceiling.
What is the best temperature to paint a deck?
Consumer Reports notes the best time to paint or stain a deck is late spring when temperatures are between 60 and 85°F and the nights are cool. You’ll need four dry days for preparation, for application, and for a finish to completely dry.
How long after power washing can you paint a deck?
The deck must be dried for at least twenty-four hours before painting or staining; forty-eight hours is ideal. Do not paint or stain a deck if there is high humidity or the temperature is above seventy-nine degrees. Be sure to stir the paint or stain before applying and follow the directions on the can.
Are knit or woven rollers better?
Knit roller covers can pick up and release higher amounts of paint than woven fabrics because the fibers have a looped backing with a single pass-through process resulting in a more “open” fabric. You can achieve spray-like results with both of these roller covers when applying any type of paint, varnish, or enamel.
What is a medium nap roller?
Medium length naps, around 3/8-inch length, are good for semi-rough surfaces because the slightly longer fibers can push paint into the dips in the surface, allowing for full coverage, but aren’t so long that they add additional texture to the surface.
What is a 3/8 nap roller?
3/8-inch nap for smooth to light-textured walls. 1/2-inch nap for most walls and medium rough surfaces, such as textured plaster, and concrete. 3/4-inch nap for rough surfaces, such as textured walls and ceilings, textured plaster, and concrete. 3/8- or 1/2-inch nap is a good general-purpose roller cover.
How many coats of paint does a deck need?
Apply 1-3 coats of paint. Paint the floor of the deck a few boards at a time, making sure you have a clear path on and off the deck so you do not paint yourself into a corner. Applying 3 coats will ensure the paint is durable and make the paint easier to maintain.
How can I paint my deck fast?
The key to painting a deck quickly is to use a sprayer. Available for rent or purchase, the machine can be loaded with the deck paint of your choice, and it will quickly cover the entire deck.
How do you prepare a deck for painting?
Applying a deck wash product to completely clean all wood surfaces. Allow to dry thoroughly, at least 48 hours. Sanding any ridges or lifted grain with 80-grit sandpaper; cleaning up any dust. Protecting adjacent surfaces, such as siding, with painter’s tape and plastic sheeting.
How do I choose a paint roller?
Ceilings and Drywall – Medium 3/8″ nap roller covers work best. Walls, Wood, and Metal – Small 1/4″ nap roller covers or foam rollers will produce the smoothest finish. Light to Medium Textured Surfaces – Microfiber rollers are best. Smooth Surfaces – Use a white woven short nap roller for an ultra fine finish.
What is a high nap roller?
Rough surfaces require a higher nap (3/4” to 1-1/2”) so the long fibers can reach into the valleys of the texture. Higher nap heights are great for textured plaster or stucco, siding, decks, concrete block, brick, and corrugated metal.
Which paint rollers are best?
The best paint rollers to buy Harris Essentials Decorating Set: Best-value paint roller set. Purdy Adjustable Paint Roller Frame: Best adjustable paint roller. Wagner Paint Roller TurboBall 550: Best electric paint roller. ProDec Twin Head Heavy Duty Roller & Brush Set: Best paint roller for masonry.
