Table of Contents
Ceilings and Drywall – Medium 3/8″ nap roller covers work best. Walls, Wood, and Metal – Small 1/4″ nap roller covers or foam rollers will produce the smoothest finish. Light to Medium Textured Surfaces – Microfiber rollers are best.
What roller do you use for ceiling paint?
Paint in Sections With a Roller For smooth ceilings, use a low nap roller. For a textured ceiling, use a roller with 1/2-inch or 3/4-inch nap. Regularly use the paint tray to load the roller with ceiling paint and roll slowly.
Do you need a special roller for ceilings?
You can either spray them with an airless sprayer or roll them. The first step in rolling these ceilings really fast is to use an 18 inch roller. You have the option of using an 18 inch or a 9 inch. Don’t want to be looking up at these ceilings for very long, so we’re going to be rolling them with an 18 inch roller.
How do you prevent roller marks when painting a ceiling?
Painting A Ceiling Without Roller Marks Use a Flat Paint Sheen. Use a Thicker Roller Nap. Use Less Paint On Your Roller. Add Another Coat of Paint, In the Opposite Direction. One Final Tip, Spray Your Ceiling.
What size paint roller nap should I use?
¼-inch nap is best for very smooth walls, ceilings, cabinetry, and other surfaces without texture, including metal. ⅜-inch nap is good for lightly textured surfaces, including most interior walls. ½-inch nap is a good length for moderately textured walls, paneling, and painted brick or concrete.
Which way do you roll a ceiling?
You want to keep it consistent on the entire ceiling. Most people agree that the best strategy is to roll toward (parallel with) the prevailing source of natural light, such as a big window. This prevents any roller lines from showing up.
What kind of roller do you use to paint a popcorn ceiling?
A paint roller for a popcorn ceiling would be any roller pad/nap roller that is thick enough to properly apply paint to a textured ceiling. A regular roller pad might work on some popcorn ceilings, but you will have to load it up with a lot of paint, and the job will definitely go a lot slower.
Is it better to use a brush or roller to paint a ceiling?
Roller provides thin, uniform and even coats, and is an ideal tool for painting large, smooth and well-prepared walls, ceilings, and large furniture. The roller is more economical to use than the brush since its porous surface holds much more paint and distributes an even layer of paint much faster.
What is considered a short nap roller?
For smooth surfaces such as new drywall, choose a shorter nap (3/16” or 1/4″) to evenly apply the paint. Because a shorter nap picks up less paint, it is common for some painters to “bump up” to a longer nap for increased production.
Why does my newly painted ceiling look patchy?
Creature of the Paint Lagoon New Member – two thicknesses of paint – thin paint sets flatter and thick paint can give a bad rough finish. – if the ceiling is absorbent and dry paint can harden almost instantly, so , as others have said work small patch by small patch.
How do you paint ceilings without getting streaks?
Cut-in the corners of the ceiling by painting them with a paintbrush, then roll the rest of the ceiling before the corners dry. It’s easier to avoid streaks if you roll over paint that is still wet. For the same reason, you should roll the entire length of the ceiling at once.
How thick should a nap roller be?
The nap is determined by the surface texture to be painted: 1/4-inch, 3/16-inch: For very smooth surfaces like metal doors and plaster. 3/8-inch, 1/2-inch: For smooth and semi-smooth surfaces like drywall. 3/4-inch: For semi-rough surfaces like wood or a textured ceiling.
What is a 3/8 nap roller?
3/8-inch nap for smooth to light-textured walls. 1/2-inch nap for most walls and medium rough surfaces, such as textured plaster, and concrete. 3/4-inch nap for rough surfaces, such as textured walls and ceilings, textured plaster, and concrete. 3/8- or 1/2-inch nap is a good general-purpose roller cover.
How many coats does a ceiling need?
Generally, you will want a minimum of two coats of paint – this is a good rule of thumb for any wall or ceiling you’re painting. You’ll rarely get a seamless finish from just one coat of paint, and even if you do, coverage isn’t the only goal when it comes to painting a room.
Do I paint the ceiling or walls first?
The ceiling should always be painted first. This allows you to effectively cover the surface with at least two coats while not having to worry about any over-spray (the effect of excess paint being sprayed onto the walls) by the roller. When painting the ceiling, you should always use a roller with a double arm frame.
Can I just paint over popcorn ceiling?
Interior acrylic-latex paint is the best type of paint to use for popcorn ceilings. If you need to protect your ceiling from moisture, though, use eggshell, satin, or semi-gloss paint sheens. Popcorn texture ceilings require more paint than flat ceilings.
