Table of Contents
How do I know what miter saw to buy?
Blade size is an important consideration in selecting a miter saw. The most common miter saw sizes are 8, 10 and 12 inches. Keep in mind that larger diameter blades can make longer cuts. Positive stops are factory set points that let you quickly make precise cuts on specific angles.
What miter saw is the best?
Keep reading to learn more about this essential woodworking tool and what we found when we performed hands-on testing with the following models. BEST OVERALL: BOSCH Power Tools Corded Dual-Bevel Sliding Miter Saw. RUNNER-UP: DEWALT 12-Inch Sliding Compound Miter Saw.
What are the three basic types of miter saws?
There are three main types of miter saws: standard, compound and sliding miter saws. Standard miters saws rotate to the side, so you can cut the board from the top at an angle. Compound miter saws also bevel, or tilt, to allow you to cut your piece at different angles, both horizontally and vertically.
Does the miter saw brand matter?
However, the only dilemma is not only buying the right miter saw, but making sure that it is coming from a trusted brand. Contractors can’t risk buying the wrong power tool. In fact, usage does not even matter; it all comes down to buying the right miter saw.
What size miter saw for 2×4?
10-inch miter saws are perhaps the most commonly used cutting tools of this kind. A 10” saw can easily do 45-degree miter cuts through 2×4 dense lumber. It’s a relatively inexpensive cutting tool and doesn’t require as much experience or strength to handle.
What size Mitre saw for trim work?
If you only expect to use your miter saw for cutting trim or siding, and don’t plan on cutting anything more than an inch thick or 6 inches wide, a 10-inch miter saw should be sufficient. But if you need to cut larger boards, or just want more versatility, a 12-inch miter saw is the better choice.
How much does a good miter saw cost?
A basic compound miter saw starts at $100, while miter saws with sliding blades start at $125. Dual-bevel miter saws start at $200, and professional-level miter saws with special features can cost as much as $800.
Is it worth buying a Mitre saw?
Miter saws are a valuable tool for the DIYer, and a must-have tool for a fully functioning workshop. They are designed to quickly cut crown molding, door frames, window casings, and picture frames. Miter saws can also make straight cuts for general do-it-yourself woodworking projects.
How wide can a 12 miter saw cut?
The bigger the blade, the deeper and wider its maximum cut. Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees.
Is a 10-inch miter saw big enough?
10-inch Miter Saw The 10-inch blade cuts pieces that are up to 6 inches wide, which covers most trim and molding boards. Trim is seldom more than 4 inches, so you’ve got plenty of wiggle room with a 10-inch miter saw. A 10-inch blade will spin faster than a 12-inch blade, resulting in smoother cuts.
Are sliding miter saws accurate?
Chop-cutting accuracy at 90° was on par with other saws at 1/256 inch in 4 inches and slide accuracy was good at 1/128 inch in 12 inches. While the 90° straight cuts were good, slide miter cuts were only fair. The blade shows some measurable and visible wobble and the head has some deflection.
What’s the difference between single and double bevel Mitre saw?
A single bevel miter saw can only tilt in one direction (either left or right). A dual bevel miter saw can tilt in both directions.
Can a miter saw make straight cuts?
Power miter saws are designed to make angled cuts for moulding, trim work, rafters and other general carpentry applications. The saws also make straight crosscuts and, when equipped with the right blade, the versatility of a miter saw is an important part of a tool arsenal for professional carpenters as well as DIYers.
What is another name for a miter saw?
A power miter saw, also known as a drop saw or chop saw, is a power tool used to make a quick, accurate crosscut in a workpiece at a selected angle. A primary distinguishing feature of the miter saw is the miter index that allows the angle of the blade to be changed relative to the fence.
What is the difference between a miter saw and a chop saw?
Whereas chop saws are rugged and relatively simple tools, mitre saws are designed and manufactured to make precision cuts at many different angles. Although a mitre saw can cut non-ferrous metal when used with the correct blade, they are most often used by joiners, kitchen fitters and cabinet makers to cut wood.
What does double bevel mean?
A double bevel miter saw, also known as dual bevel, allows operators to move the saw head in both directions. This means you can perform a bevel cut, in either direction, without having to move or flip the material being cut. When not in the beveled position, both single and double bevel options perform the same.
Can a table saw do everything a miter saw can?
While a miter saw cannot cut large pieces of wood, a table saw can make virtually any cut a miter saw can make—with a lower level of precision.
Is a laser on a miter saw worth it?
You may be asking yourself, “is the laser worth it for miter saws?” Well, a miter saw with a laser will enable you to seamlessly work on several woodworking projects with less hassle. The more advanced Miter saw will allow you to make crosscuts, bevels, and miters more accurate for spectacular clean work.
