Table of Contents
What MERV rating is best for home use?
As a general rule, residences do not use higher than MERV 8 filters. We do recommend that everyone uses filters that have at least an 8 MERV rating. These filters will remove the majority of pollutants from your indoor air.
Is MERV 13 too high?
Filters within a MERV rating of 17-20 are almost never necessary in a residential home. A MERV rating of 13-16 is considered hospital level air quality, so it is unlikely your home needs any more than that.
Is MERV 13 too high for home?
MERV 13 air filters are the highest-rated air filters for home use. Any air filter with a rating higher than 13 will restrict air flow to the point of which could cause damage to your HVAC system, resulting in an added expense to fix it.
What MERV rating should I use for Covid 19?
What kind of filter should I use in my home HVAC system to help protect my family from COVID-19? Minimum Efficiency Reporting Values, or MERV, reports a filter’s ability to capture particles. Filters with MERV-13 or higher ratings can trap smaller particles, including viruses.
Is MERV 11 too restrictive?
A MERV 11 air filter has a higher efficiency rating. Meaning, it can capture finer particles and clear more contaminants out of the air. In most cases, a MERV 11 air filter isn’t too high for residential use.
Is MERV 8 good enough?
A MERV 8 air filter is efficient at trapping a majority of indoor particulates that could debilitate those with asthma and allergies, or even cause long-term respiratory problems.
Is MERV 11 or 13 better?
A MERV 11 rated furnace filter can trap the majority of harmful contaminants that are present in the air. A MERV 13 filter is capable of filtering out all particle impurities like dust, lint, pollen, mold, dust mites, pet dander, smog, and smoke. On top of this, it can also trap bacteria and viruses.
Is MERV 12 good?
9-12 MERV – These filters are more efficient and usually offer the best indoor air quality improvement for residential applications. Deep pleated filters fall into this category. Because they work so well at removing airborne pollutants, they must be regularly checked to ensure proper airflow.
Is MERV 11 better than 12?
The difference between 11 and 12, therefore, is quite negligible. We do not carry MERV 12; MERV 11 does just as good a job. MERV 12 filters trap 80 to 89 percent of average particles of 1.0 to 3.0 microns, with an average particle size efficiency of 90 percent or better. As you can see, they’re pretty close.
Is a MERV 13 filter washable?
A: Yes. After using the mask in public, the mask should be cleaned or sterilized. If you need to wash the mask, remove the filter material and hand wash. Machine washing tends to crumple the nose wire which will cause it to eventually break.
Are MERV 13 filters worth it?
A MERV 13 filter is a step in the right direction and captures more particles than a typical MERV 8 filter. However, it is not as good at capturing small virus sized particles like a HEPA can. A MERV 13 will trap less than 75% of air particles that are 0.3-1.0 micron in size (the coronavirus is 0.1 microns).
Is a MERV 12 filter too restrictive?
The higher the MERV rating, the more restrictive the filter might be. Plus, a MERV 12 filter that is just 1” (one inch) thick will likely be more restrictive than a MERV 12 filter that is 4” (four inches) thick. A clogged air filter of the “right” MERV rating will do this too. Low airflow.
Can I use MERV 13 in my furnace?
MERV 13 is the highest MERV value safe for residential furnaces; the higher ratings are used primarily in commercial units. If you are wondering what MERV to try, keep these recommendations in mind; ASHRAE recommends MERV 6 or higher.
How long do MERV 13 filters last?
For Merv 8, 11 and 13 filters, we recommend that you change your filter at least every 3 months, however changing your filter every 2 months provides better filtration which provides healthier and cleaner air in your home.
How many microns does MERV 13 filter?
MERV 13 filters are a step up from the MERV 8 or 9 rating. A MERV 13 filter can capture less than 75 percent of air particles that are 0.3 to 1.0 micron in size.
Can my furnace handle MERV 11?
The short answer is that it can, but it’s not really an issue except under extreme circumstances. Most modern HVAC systems have no problem working with higher MERV filters, which is why millions of homeowners depend on them.
Is MERV 11 a good filter?
MERV 11 rated air filters have a filtration efficiency of a little over 90%, making them highly efficient. MERV 11 furnace filters effectively trap pollen, dust, lint, dust mites, and mold, along with smoke, pet dander, smog, auto emissions, bacteria, and other such fine particles.
