Table of Contents
What is MERV rating for Trane?
Clear The Air’s Trane Perfect Fit Merv 13 filters are the best possible choice in residential HVAC filtration.
What MERV rating can my HVAC handle?
The EPA recommends MERV ratings of 9-12 because it is the most effective at keeping your home’s air clean. A filter with this rating will prevent particulates as small as 1 micron from entering your HVAC system. This rating qualifies as HEPA (high-efficiency particulate absorption) level.
What MERV rating is best for home use?
As a general rule, residences do not use higher than MERV 8 filters. We do recommend that everyone uses filters that have at least an 8 MERV rating. These filters will remove the majority of pollutants from your indoor air.
Is MERV 13 too high for HVAC?
Filters within a MERV rating of 17-20 are almost never necessary in a residential home. A MERV rating of 13-16 is considered hospital level air quality, so it is unlikely your home needs any more than that.
Can you use a MERV 13 filter in a Trane furnace?
Clear The Air’s Trane Perfect Fit Merv 13 filters are the best possible choice in residential HVAC filtration. This filter is the ideal choice for asthmatics.
Is MERV 11 too restrictive?
A MERV 11 air filter has a higher efficiency rating. Meaning, it can capture finer particles and clear more contaminants out of the air. In most cases, a MERV 11 air filter isn’t too high for residential use.
Is MERV 8 good enough?
A MERV 8 air filter is efficient at trapping a majority of indoor particulates that could debilitate those with asthma and allergies, or even cause long-term respiratory problems.
Can I use MERV 13 in my house?
Minimum Efficiency Reporting Values, or MERV, reports a filter’s ability to capture particles. Filters with MERV-13 or higher ratings can trap smaller particles, including viruses. Many home HVAC systems will have a MERV-8 filter installed as the default. Be sure the HVAC filter is correctly in place.
Is MERV 11 better than 12?
The difference between 11 and 12, therefore, is quite negligible. We do not carry MERV 12; MERV 11 does just as good a job. MERV 12 filters trap 80 to 89 percent of average particles of 1.0 to 3.0 microns, with an average particle size efficiency of 90 percent or better. As you can see, they’re pretty close.
Can my furnace handle MERV 14?
The ideal MERV filters for both air filtering and furnace efficiency are 7-13, experts say. Your system may handle MERV 14-16 with no discernable stress. However, many residential systems require modifications to pull air through these filters.
Are MERV 13 filters worth it?
A MERV 13 filter is a step in the right direction and captures more particles than a typical MERV 8 filter. However, it is not as good at capturing small virus sized particles like a HEPA can. A MERV 13 will trap less than 75% of air particles that are 0.3-1.0 micron in size (the coronavirus is 0.1 microns).
Will a MERV 13 filter damage my furnace?
MERV 13 air filters are the highest-rated air filters for home use. Any air filter with a rating higher than 13 will restrict air flow to the point of which could cause damage to your HVAC system, resulting in an added expense to fix it.
Is MERV 11 or 13 better?
A MERV 11 rated furnace filter can trap the majority of harmful contaminants that are present in the air. A MERV 13 filter is capable of filtering out all particle impurities like dust, lint, pollen, mold, dust mites, pet dander, smog, and smoke. On top of this, it can also trap bacteria and viruses.
Will MERV 12 hurt my furnace?
The short answer is that it can, but it’s not really an issue except under extreme circumstances. Most modern HVAC systems have no problem working with higher MERV filters, which is why millions of homeowners depend on them.
Are MERV 13 filters too restrictive?
At this point, it’s also important to note: MERV ratings go above 13. However, they’re too restrictive for normal home HVAC systems, and thus using them can cause potentially expensive problems.
What size filter does a Trane xr90 use?
Furnace Filters for the Trane XR90 Air Flow Configuration Cabinet Width Filter Size(s) Upflow / Horizontal 23″ 20x25x1 Downflow / Horizontal 23″ 16x20x1 Upflow / Horizontal 26-1/2″ 24x25x1 Downflow / Horizontal 26-1/2″ 16x20x1.
What size filter does a Trane furnace take?
Trane furnace filter size are measured by width, length and depth. The size on the filter is commonly stated in inches (example: 14″ x 14″ x 1″).Trane Filter Size Based On Model Number. Model Number Filter Size 50718 16” x 25” x 1” 50719 20” x 20” x 1” 50720 20” x 22” x 1” 50721 20” x 25” x 1”.
Which MERV filter is best?
In general, the best MERV rating for a home is somewhere between 8-10. These filters will capture a large portion of the airborne particles and improve indoor air quality without making your energy costs rise significantly.
