Table of Contents
Is a MERV 13 filter too restrictive?
MERV 13 air filters are the highest-rated air filters for home use. Any air filter with a rating higher than 13 will restrict air flow to the point of which could cause damage to your HVAC system, resulting in an added expense to fix it.
Which MERV rating should I buy?
According to the ASHRAE, the best rating for residential HVAC systems is MERV 13. But before you upgrade your filter, make sure your specific system can accommodate that rating. A higher MERV rating often means lower airflow, which can cause the system to work harder—use more energy—to do its job.
Is a MERV 11 filter too restrictive?
Air filters with higher MERV ratings can filter more, but the thickness of the filter material can restrict airflow. Restricted airflow can decrease comfort, increase energy use, and accelerate the wear and tear of HVAC components. In most cases, a MERV 11 air filter isn’t too high for residential use.
What MERV rating should I use for Covid 19?
What kind of filter should I use in my home HVAC system to help protect my family from COVID-19? Minimum Efficiency Reporting Values, or MERV, reports a filter’s ability to capture particles. Filters with MERV-13 or higher ratings can trap smaller particles, including viruses.
Are MERV 13 filters bad for HVAC?
Filters within a MERV rating of 17-20 are almost never necessary in a residential home. A MERV rating of 13-16 is considered hospital level air quality, so it is unlikely your home needs any more than that.
Is MERV 13 good for residential?
MERV 13 air filters are the highest-rated air filters for home use. If you have chronic or severe breathing problems, a MERV 13 rating would be good for you. Anyone in the household who requires the use of an inhaler, oxygen tank, or ventilation machine, they would also fall into this category.
Is MERV 11 or 13 better?
A MERV 11 rated furnace filter can trap the majority of harmful contaminants that are present in the air. A MERV 13 filter is capable of filtering out all particle impurities like dust, lint, pollen, mold, dust mites, pet dander, smog, and smoke. On top of this, it can also trap bacteria and viruses.
Is MERV 8 good enough?
A MERV 8 air filter is efficient at trapping a majority of indoor particulates that could debilitate those with asthma and allergies, or even cause long-term respiratory problems.
What MERV rating can my HVAC handle?
The EPA recommends MERV ratings of 9-12 because it is the most effective at keeping your home’s air clean. A filter with this rating will prevent particulates as small as 1 micron from entering your HVAC system. This rating qualifies as HEPA (high-efficiency particulate absorption) level.
Can my furnace handle MERV 11?
The short answer is that it can, but it’s not really an issue except under extreme circumstances. Most modern HVAC systems have no problem working with higher MERV filters, which is why millions of homeowners depend on them.
Is MERV 10 good?
A filter with a MERV rating of around 10 to 12 is sufficient to remove most allergy-causing particles from your home’s air.
Is MERV 11 better than 12?
The difference between 11 and 12, therefore, is quite negligible. We do not carry MERV 12; MERV 11 does just as good a job. MERV 12 filters trap 80 to 89 percent of average particles of 1.0 to 3.0 microns, with an average particle size efficiency of 90 percent or better. As you can see, they’re pretty close.
Is MERV 11 good?
MERV 11 rated air filters have a filtration efficiency of a little over 90%, making them highly efficient. MERV 11 furnace filters effectively trap pollen, dust, lint, dust mites, and mold, along with smoke, pet dander, smog, auto emissions, bacteria, and other such fine particles.
Can I use MERV 13 in my furnace?
MERV 13 is the highest MERV value safe for residential furnaces; the higher ratings are used primarily in commercial units. If you are wondering what MERV to try, keep these recommendations in mind; ASHRAE recommends MERV 6 or higher.
Does air filtration help with Covid?
When used properly, air cleaners and HVAC filters can help reduce airborne contaminants including viruses in a building or small space. By itself, air cleaning or filtration is not enough to protect people from COVID-19.
How long do MERV 13 filters last?
For Merv 8, 11 and 13 filters, we recommend that you change your filter at least every 3 months, however changing your filter every 2 months provides better filtration which provides healthier and cleaner air in your home.
Is MERV 12 good?
9-12 MERV – These filters are more efficient and usually offer the best indoor air quality improvement for residential applications. Deep pleated filters fall into this category. Because they work so well at removing airborne pollutants, they must be regularly checked to ensure proper airflow.
Is a MERV 12 filter too restrictive?
The higher the MERV rating, the more restrictive the filter might be. Plus, a MERV 12 filter that is just 1” (one inch) thick will likely be more restrictive than a MERV 12 filter that is 4” (four inches) thick. A clogged air filter of the “right” MERV rating will do this too. Low airflow.