Table of Contents
DECK BOARD SIZE OPTIONS Composite deck boards are typically offered in 12-foot and 16-foot lengths.
What size do deck boards come in?
Common deck board widths are 4”, 6” and 8”. The widths are readily available in most lumber or building supply stores, and the number of pieces easily calculated into deck dimensions. Other widths may be used for aesthetics and effect.
What size do decking boards come in UK?
How wide are deck boards? The most common decking widths are 90mm to 150mm, with 120mm and 140mm in between. The width option you choose for your project can make a big impact in the ultimate effect, so get creative to achieve the best look for your decking while staying within your budget.
What lengths do composite decking boards come in?
Composite decking size refers to the length and width of the boards used for deck building and repairs. Most manufacturers offer composite decking boards in 12′, 16′ and 20′ lengths. The width varies by brand and style and can range from one to two inches thick and four to six inches wide.
How many deck boards do I need for a 12×12 deck?
For example, a 12-foot x 12-foot deck of 5/4 x 6 pressure treated wood decking on 16 inches on center spacing of joists will require: A 12-foot long deck with joists 16 inches on center will require 10 joists. 20 fasteners x 26 (number of rows of decking) = 520 fasteners. Add 10 percent to be safe.
How many decking boards do I need for a 10×10 deck?
For a 10×10 square deck, you would therefore need twenty-two 10′ deck boards. Dimensions for deck boards can vary depending on the look you want and the deck board type you use. However, the most common is a 5/4” thick by 6” wide deck board of any length.
What decking boards are widest?
Wider than other composite decking boards Our new EvoDek+ Grey boards have a width of 158mm, making them noticeably wider than most other composite decking products.
How much gap do you leave between decking boards?
Determining Deck Board Spacing When using wood decking, you want a gap of at least 1/8 of an inch after your decking has dried out. If you’re using decking that’s already been dried out, you can leave a 1/8-inch gap when you install. Many decks will use “green” wood, or wood that hasn’t been dried down or kiln dried.
What lengths does merbau decking come in?
– Merbau Timber Decking is available in a variety of different sizes, including 70x19mm, 90x19mm and 140x19mm.
Does composite decking come in 24 foot lengths?
Lighter in weight than wood-plastic composites, NyloDeck is available in lengths up to 24 feet and spans deck framing up to 24 inches on center. The decking also can be painted or stained.
How much does it cost to build a 20×20 deck?
The average homeowner spends $2,200 to build a 10×10 foot deck, $6,160 to build a 14×20 deck, and $8,800 to build a 20×20 deck. The cost to build a deck with pressure-treated wood, hardwood, or composite is about $25 per square foot, for both materials and installation.
What is the longest length of Trex decking?
2 x 6 boards available in 12′, 16′, and 20′ lengths.
How do you stagger deck boards?
A common method for staggering a deck is to start the first row with a full plank, then cut one-third of the next row’s first board off the end. The row after that has an additional one-third cut off and then repeat when you get back to a full board.
How do I figure out how many decking boards I need?
The first step for answering “how to calculate how much decking I need” is to determine your deck’s square footage, or area, by taking the length of your deck times the width (L x W). EXAMPLE: For a deck that is 16 feet long and 12 feet wide, multiply 16 by 12. This gives you 192 square feet, your deck’s total area.
Should I use 2×6 or 2×8 for deck?
For upper-level decks, 2×10 is recommended as the minimum size to use for strong guard post connections. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. Most decking is not strong enough to support longer spans than 16″.
What is the best size wood for decking?
Width: Six-inch wide boards are ideal in most cases. Four inch wide material takes longer to install, creates more gaps and requires a lot more fasteners—but you can use it. Eight inch wide boards, because of their greater width, have more of a tendency to crack and cup; avoid using them.
What size is a large deck?
A small deck intended to hold a round dining table should be at least 12 feet by 12 feet, while a large deck can be designed with much more space. The average deck size is between 300 and 400 square feet. Generally, a deck should be wider than it is deep, with the longer dimension running along the house.
What size are deck joists?
Commonly used joist sizes are 2-by-6, 2-by-8 and 2-by-10. For example, when you space joists 16″ apart — which is standard for residential decks — a deck spanning 9 1/2′ would require 2-by-6 joists, a 13′ deck would need 2-by-8 joists and a 16′ deck calls for 2-by-10 joists.
