Table of Contents
Galvanized, ceramic coated, or stainless steel screws are the best corrosion-resistant fasteners for pressure-treated cedar or redwood.
Can you use zinc coated screws in pressure treated wood?
Fasteners for preservative-treated wood shall be of hot dipped zinc-coated galvanized steel, stainless steel, silicon bronze or copper. In the absence of manufacturer’s recommendations, a minimum of ASTM A653 type G185 zinc-coated galvanized steel, or equivalent, shall be used.
Can I use regular screws on treated wood?
If you use regular screws with pressure treated wood, they may bend or slip and can become corroded by the preservative chemicals contained in the wood. Thus, we recommend using 305 or 18-8 grade stainless steel screws with an advanced anti-corrosive coating, like the Hillman Fasteners’ DeckPlus 48419 screws.
Can you use galvanized screws in pressure treated wood?
Mechanically galvanized screws are generally suitable for decks and other outdoor projects made of pressure-treated lumber. Nevertheless, you should not use them with PT lumber in contact with the soil, in high-moisture areas, or in areas with salt content in the air.
What kind of hardware should I use for pressure treated wood?
Hot-dip galvanized or stainless steel fasteners, anchors and hardware are recommended by the Preservative Treated Wood Industry for use with treated wood. This has been the position of this industry for years and their position has not changed with the transition to the alternative copper-based products.
What screws to use for outdoor wood?
Deck screws are basically production screws that have been plated and/or coated to increase their corrosion resistance. They’re great for outdoor projects, like playhouses or decks. For even greater resistance to rust and corrosion, the two best screw materials are silicon bronze and stainless steel.
Are GRK screws good for pressure treated wood?
GRK fasteners are ICC code approved for exterior use in ACQ pressure treated lumber and have the strength to meet all your general construction needs. A building inspector will be able to use an ESR report to code approve your construction projects.
Can you use drywall screws in pressure treated wood?
It is a very bad idea to use dry wall screws with treated lumber. There are certainly ASTM codes which set out the coating specifications for certain types of fasteners to be used with ACQ treated lumber. They should also come back and remove the drywall screws and replace them with an ACQ compatible screw.
Can you drill into pressure treated wood?
When building a deck, you often have to drill holes in pressure-treated wood for bolts or wires. The best practice is to apply a wood preservative to the inside of the holes to prevent rot, the same way you apply preservative to end grain after making a cut.
What fasteners should be used in CCA treated timber?
Bright steel nails have successfully been used for decades in this environment. CCA H3. 2 timber is similar in that bright steel nails will not corrode provided a low moisture content is maintained.
Will pressure treated wood corrode metal?
Pressure treated wood is a popular product for outdoor construction, i.e. bridges and decks. When wood treated with the new chemicals was exposed to metal parts, the metal tended to corrode, even moreso in water contact environments, in only a few years.
What are deck screws?
Deck Screws are specific screws used to hold a deck together. While they are typically 305 Stainless steel there are also some other considerations to make when buying.
Are stainless steel screws good for treated lumber?
Corrosion-resistant stainless steel screws, nails and bolts in grades 304 and 305 can be used for copper-treated wood in most areas, while grade 316 should be used in coastal areas. But stainless steel fasteners can cost five to 10 times more than similar galvanized fasteners.
Are galvanized nails OK for treated wood?
For most applications, however, best nails for pressure treated lumber are either hot dipped galvanized nails and bolts. For screws we recommend using ones that have a protective coating that is designed for use with pressure treated lumber. one example would be Outlaw fasteners.
Can I use Galvanised screws in treated pine?
All bolts, screws, nails plus brackets, framing anchors and other hardware in contact with preservative treated pine should be hot dipped galvanised, monel, silicone bronze or stainless steel. Electroplated fasteners are not suitable due to early break down of the plating.
Are zinc screws good for outdoors?
Zinc-plated (electroplated galvanized screws) are coated in zinc powder. The result is a bright finish that’s rust resistant but not for outdoor use. Brass-plated and copper-plated screws will not rust, which makes them an attractive choice for outdoor projects, but they are not as strong as steel.
Do you need special screws for outside?
If you’re working on an outdoor project you need screws that won’t rust. A screw that has corroded or become rusty is liable to break, and will cause you problems further down the line. Not all screws are made for outdoor use, so it’s important to choose the right types of outdoor screws for your project.
What bolts are best for outdoor use?
Stainless steel provides high levels of corrosion resistance. Stainless steel nuts, bolts and washers are typically suitable for exterior projects and work with pressure-treated lumber.
Should I screw or nail deck boards?
For the decking boards, many agree that screws perform better than nails. They have better tensile strength and will less likely to pop out, which is a common problem in decking. Many also agree that nails are better used for the frame of the decking.
