Table of Contents
What kind of saw is best for cutting laminate flooring?
A circular saw is an electric saw that spins quickly and makes straight cuts. It is one of the best tools to use when shaping laminate and can be held in one hand, although a stand should be used to hold materials in place.
Can you cut laminate flooring with a blade?
A regular utility knife blade can be used to cut flexible, self-adhering laminate strip material. The caveat is that you must change the blades frequently so the knife cuts properly — a dull blade will not cut effectively.
Can I use circular saw to cut laminate flooring?
A Circular Saw: You can also use a circular saw but it will require additional tools like a square and some type of work surface to cut the laminate flooring on. Sawhorses and a piece of plywood would make a pretty ideal workbench for this task and would be the easiest and most convenient method, in my opinion.
What type of saw blade Do I need to cut vinyl plank flooring?
For cutting vinyl planks, you need a jigsaw blade that is less aggressive and has finer teeth on the blade. The fine teeth will give a smooth cut and not damage the edges of the plank being cut.
How can I cut laminate without chipping?
To cut through laminate countertops, you can use a hand saw, but a circular saw makes the job much quicker. Because a circular saw can produce jagged edges and chip the laminate, your best bet is to lay the laminate face-side down and cut from the back to the front.
Can you cut laminate wood with a utility knife?
You can also cut it easily with a utility knife. If you have a heavy duty utility knife, you can cut the laminate with that also. Don’t worry about cutting all the way through the plank. When shaping this material, you want to make precise cuts.
How many tooth blades do I need for vinyl flooring?
What is the best blade to cut vinyl plank flooring? If using a miter saw, the blade will be a round cutting disc. Use one that has between 80 and 100 teeth to make smooth, fine cuts. Circular saws can produce the same type of cut as a miter saw because they use a similar cutting blade.
What can I use to cut laminate?
In fact, you can cut the planks using a table saw, miter saw, circular saw, hand saw or laminate cutter. However, using a diamond blade is recommended as laminate can be tough to cut through and may damage another type of blade. Typically, you will cut with the finished side up.
How do you cut Formica without chipping it?
You can minimize the potential for chipping if you use a finish blade with lots of teeth, making sure the sharp is keen. You can further reduce the chance of chipping by using masking tape along the cut line and cutting through the tape. As with all cutting, measure at least twice and mark the line well and clearly.
Can you cut laminate with Stanley knife?
A utility knife can be used to make scoring cuts on Formica. Since all plastic laminates are essentially the same, cutting Formica with a utility knife is identical to cutting most laminates.
Can you cut laminate flooring with a jigsaw?
A jigsaw is a real all-rounder when it comes to cutting laminate floors. It’s best used to cut out shapes from your board. For example, when you want to place boards around your toilet or maybe a pillar. Always use a fine toothed blade and have the saw blade spinning before you touch the board.
How do you cut a laminate countertop without a router?
Use 100-grit sandpaper to clean up any imperfections and create a smooth surface. Wipe away the dust with a tack cloth. Cut the laminate sheeting down to size to fit the countertop with a circular saw or a fine-toothed handsaw. Give yourself an extra inch on both dimensions — you can trim the excess later.
How do you cut laminate wood lengthwise?
How to cut laminate flooring lengthwise Step 1: Place spacers along the walls. Step 2: Lay the laminate flooring board down, making sure the tongue is oriented towards the wall. Step 3: Use a straight edge or another laminate flooring board to guide the jigsaw / circular saw, while doing the cut.
How do you cut laminate length?
Cutting laminate to length: Measure the length required using your tape measure. Mark the board for the cut. Use your square and pen or pencil to create a straight line across the face of the board. Use your cutting tool to make the cut on the waste-side of the line, and use a damp cloth to remove any remaining ink.
Do you cut laminate flooring face up or down?
Most laminate flooring boards have a surface coating of plastic that is vulnerable to chipping when you cut it. For this reason, it’s a recommended practice to cut from the back of the board. You can minimize the chipping when cutting face up by using a laminate-cutting blade in your saw.
Do you cut the tongue off the first row of laminate?
Place the first plank with the tongue side towards the wall, being sure to allow 1/8″ for expansion. We recommend cutting off the tongue on this first row to avoid any problem with the expansion gap. If it is too short, cut a new plank in half and use one half to start the second row.
How many teeth do I need to cut laminate?
Diamond-tipped blades that are made for laminate and fiber cement usually have a low number of teeth to reduce the dust produced by cutting cement. However, typical circular and miter saw blades that are used for laminate will have 80 to 100 teeth for fine, precision cutting.
