Table of Contents
When painting plastic or vinyl, use a high quality, exterior, acrylic latex paint or a paint made specifically for plastic. While not required, priming the shutters with a latex primer before painting with acrylic latex paint can increase adhesion and allow better coverage by the top coat.
Can you paint faded vinyl shutters?
For your old vinyl shutters, look for special vinyl primers such as Krylon Fusion and any exterior grade latex-based paint. This adheres well to plastic surfaces. They are more common on the market today and you can use any exterior grade latex-based primer and paint on them.
What is the best paint finish for exterior shutters?
Soft Gloss paints are characteristic of exterior coatings offering protection against UV rays. These paints are typically used for exterior doors, trim and shutters. Semi-gloss paints have a higher shine level than flat, eggshell and satin paints.
Can I spray paint vinyl shutters?
Spray painting vinyl shutters takes less than ten minutes, plus dry time in between coats. Not only does spraying save time, but the paint finish looks so much better. The best way to spray them is horizontally with a drop cloth underneath to protect grass from over-spray.
Do you need to prime vinyl shutters before painting?
Yes, you can repaint plastic or vinyl shutters. While not required, priming the shutters with a latex primer before painting with acrylic latex paint can increase adhesion and allow better coverage by the top coat.
Can I paint my shutters without taking them down?
Can you paint shutters without taking them down? Yes, you can if you are careful and properly mask off the surrounding areas with painters tape and plastic. Or if you prefer to paint your shutters with a brush.
Is vinyl paint any good?
Vinyl matt paints are, generally, less durable than those with a sheen. They are easier to mark and discolour. As such, matt vinyl solutions are often used on ceilings and high walls. They are perfect for hiding imperfections and can help to make any space feel closer and more natural.
How much does it cost to paint vinyl shutters?
Paint Shutters Costs Item Cost Labor – Experts note that it is labor that is the largest portion of the total cost of painting shutters $30-$45 per hour at roughly one hour per shutter Materials – Paint, primer, filler, caulk, brushes, and tape $20-$25 per shutter Total Cost $50-$70 per shutter.
Should shutters be semi-gloss?
When to use a semi-gloss finish: A semi-gloss finish is best for painting garage doors, front doors, exterior trim, gutters, shutters, metal lamp posts, railings, and window sills.
Should shutters be satin or semi-gloss?
A satin finish can also be used for trim or shutters if you are looking for a less glossy look, but the ability to withstand frequent cleaning. Unlike lower-gloss sheens, Semi-Gloss and glossy sheens create a smooth, bright, reflective finish. They are both durable and can withstand repeated cleanings.
Should shutters and door be same color?
Should they match the front door? Should they match the trim? Your shutters should coordinate well with these other items, but they absolutely don’t have to be the same colors as each other. One option is to use the same color, but a lighter or darker shade of the paint, adding variety without the risk of clashing.
How do you make vinyl shutters look new?
There are a variety of vinyl restoration products available on the market, but the best I’ve found is 303 Aerospace Protectant. Just spray it on, wipe with a soft cloth, and your shutters will look (almost) as good as new.
Is there a spray paint for vinyl?
Dupli-Color Vinyl & Fabric Spray No primer is necessary with this Dupli-Color spray paint for vinyl and fabric, which has been specially formulated with an adhesion promoter to achieve a durable, flexible, and opaque finish. It’s ideal for automotive interiors such as dashboards, panels, seats, and carpet.
What’s the best way to paint shutters?
By far, the easiest and quickest way to paint shutters is to use spray paint. Choose the type of paint carefully, taking into consideration the material of the shutters. Remove the shutters and take them outdoors to a shaded area before prepping them with a primer paint or a slight sandpaper scuffing.
How many shutters will a can of spray paint cover?
With a spray nozzle on my hose, a plastic bristle brush and some Dawn I scrubbed and rinsed the shutters well and then I set them in the sun to dry and sit overnight. The next day I wiped them with a tack cloth and busted out my spray paint. 12 shutters took about 8 cans of spray paint.
How do you paint shutters with a brush?
Paint the louvers first with a 1/2- or 1-inch trim brush. Then paint the frame with a 2-inch brush. Leave the shutter edges until last so you can periodically turn the shutter over to check for runs. If you find any, smooth them out with an almost-dry brush before they set.
Can I paint shutters myself?
Paint Shutters Without Removing Them Or you can paint them without taking them down. In fact, some shutters can’t be removed. In this case or if you just want to save yourself some time, you can paint them with a brush.
What kind of paint do you use on metal shutters?
A semi-gloss paint or enamel is a good choice for shutters and house trim because the glossy surface helps shed water. Some aluminum shutters feature panels, but many of them have louver detailing that mimics the look of operable shutters. Spraying on the paint will give you the best results.
How are vinyl shutters attached?
Newer model shutters are mounted by hanging on a metal clip screwed into the wall. Older model vinyl shutters use a mounting clip called a “shutter lok.” Shutter loks mount through existing holes in the shutter that extend to the house facing surface.
