Table of Contents
Petroleum-based bar oil has been the standard for chainsaws. Lightweight oil is used in winter and heavier oil in summer. Manufacturers of chainsaws make bar and chain oils specially blended for their machines to extend their lifespan, but if they are not available, the owner’s manual suggests alternatives.
Can you use regular motor oil in a chainsaw?
Chain saw bar and chain oil isn’t rated by SAE like traditional automobile motor oil. If your manufacturer’s bar and chain oil is unavailable, you can use SAE 30 weight motor oil to lube your chain during the summer and SAE 10 weight during the winter, according to the University of Missouri Extension.
Can I use 5w30 in my chainsaw?
Can I Use 5w30 for a Chainsaw Bar? Like 10w30 motor oil, you can use 5w30 oil. However, the thin and low-viscosity SAE5 weight oil will not cling to the chain and chainsaw bar very well in the summer. You may experience a lot of oil loss and a messy worksite if you choose this chainsaw bar oil alternative.
Can I use 10w30 for chainsaw bar oil?
Normally, you would need to use bar and chain oil to lubricate your chainsaw because this type of oil was specifically formulated to be used on chainsaws. As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil.
What can I use instead of bar oil for chainsaw?
Chainsaw Bar And Chain Oil Alternatives Motor oil. If you find yourself in a situation where you need to use your chainsaw but you don’t have any of the correct oil, one of the obvious options is motor oil. Vegetable oil. Canola oil. Drained hydraulic fluid.
Can I use 2 stroke oil for chainsaw?
There is two stroke oil for air cooled engines and two stroke oil for water cooled engines. Two stroke oil for water cooled engines is not designed to operate at the higher temperatures of an air cooled engine such as a chainsaw engine.
Can you use olive oil in a chainsaw?
Other vegetable oils most commonly used in chainsaws: Olive oil – thicker than canola but not good at low temperatures. Sunflower oil – thinner than regular chain oil.
What is special about chainsaw oil?
Chainsaw bar oil has a certain level of “slickness” to it. This slickness keeps the chain spinning at a fast rate without getting slowed down by the friction that occurs when metal rubs against metal. So, if you want to use the “correct” type of bar oil in your chainsaw, consult the manual and use what it suggests.
What is the difference between chainsaw oil and motor oil?
Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.
Can you use old motor oil for chainsaw bar?
Yes you can in a pinch, but motor oil is much thinner than bar oil and you will use it very fast. Chainsaw bar oil is thick and sticky and is designed to be used on bars and chains.
What weight is bar oil for a chainsaw?
What viscosity is chainsaw bar oil? The viscosity of chainsaw bar oil can vary depending on the formula but 30W is standard. In cold weather, a thin 10W chainsaw oil may be advantageous, while very hot temperatures may require a much thicker 40W or 50W formula.
Do Electric chainsaws need bar oil?
Electric chain saws derive their power from an electric source, so they don’t need fuel to run. Electric chain saws don’t require this added oil, but the bar and chain do need to be properly lubricated. Electric chain saws use the same type of lubrication for the bar and chain as gas-powered chain saws.
Can you use 2 stroke oil as bar oil?
No, it is not. 2-cycle oil is a gasoline additive that provives lubrication to the internal engine parts since the engine has no oil internally. Bar and chain oil is a much heavier viscosity intended for lubrication of the bar and chain specifically.
Can you use vegetable oil in a chainsaw?
VEGETABLE OIL FOR LUBRICATING CHAIN SAWS. To work properly, chainsaw chains and bars must be lubricated.In the past, most operators have used petroleum-based oils. Rapeseed-based (usually called canola) oil is currently the most common environmentally compatible chain-and-bar lubricant.
Do all chainsaws use the same oil?
Chainsaw oil is not always the same, but you’ll typically be looking at a proprietary blend of refined mineral oils. This will also include inhibitors for oxidation and anti-wear corrosion, plus it will have a high tack additive included to help the oil stick to the bar and chain while it’s in operation.
Can you use snowmobile oil in a chainsaw?
Chainsaw oil and the high end motorsports oil may be engineered for their specific targets, but most of that overlaps and it’s fine to run it in saws.
Does 2 stroke oil Quality Matter?
When it comes to 2-stroke oil, it is highly recommended to use good quality oil from the likes of Stihl or Husqvarna. Using low quality 2-stroke oil can cause damage to your machine which can be very costly to repair.
Can I use sunflower oil for my chainsaw?
If using a saw to cut meat, then vegetable oil is the obvious choice so the meat tastes good (you can use sunflower, canola, palm oil etc).
