Table of Contents
The manufacturers of ACQ, CA, ACZA and CCA and the treated wood industry are all recommending hot-dipped galvanized nails and stainless steel nails and screws with their treated wood products.
Do I need special nails for pressure treated wood?
The first rule is: Never use common or bright finished nails. For most applications, however, best nails for pressure treated lumber are either hot dipped galvanized nails and bolts. For screws we recommend using ones that have a protective coating that is designed for use with pressure treated lumber.
Can you use framing nails in pressure treated wood?
For ultimate tool performance, use only genuine Paslode® 30º framing nails. Strips won’t break, even in rainy weather. Paper tape collation means no flying debris. Paslode’s Hot Dipped Galvanized Plus nails offer premium corrosion in all pressure treated lumber such as ACQ and MCQ.
Will pressure treated wood eat nails?
Just any wood screw or nail will not do; instead, look for fasteners that are specifically designed for use with ACQ-treated materials.
What type of screws and nails must be used in pressure treated lumber?
Galvanized, ceramic coated, or stainless steel screws are the best corrosion-resistant fasteners for pressure-treated cedar or redwood.
Can electro galvanized nails be used with pressure treated wood?
Electra-galvanized nails, which were the predominant fasteners used with CCA lumber, are not acceptable for use with ACQ and CBA pressure treated lumber. The zinc content in the coating of those nails is insufficient for long-term resis- tance to the corrosive action by the chemistry in the new lumber.
How long will electro galvanized nails last in treated lumber?
Ideal for indoor applications, the EG coating has an average lifespan of 5-10+ years depending on the environment.
Can you use Liquid nails on pressure-treated wood?
Yes, you can use liquid nails to join pressure-treated wood together. However, in most cases, liquid nails dry out over time and tend to lose their adhesive strength.
What nails do you use for a deck?
The best nails for decking are stainless steel nails as they offer the greatest resistance to rust with minimum discoloration to woods such as cedar. However, stainless steel nails are considerably more expensive than other nails.
Can you use stainless steel nails in pressure-treated wood?
The wood treatment industry recognizes the corrosive nature of ACQ in relation to fastening systems, and recommends hot-dipped galvanized or stainless steel nails be used.
Can you touch pressure-treated wood?
The sawdust from PT pressure-treated wood is an irritant to the nose, eyes, and skin. Use of a dust mask and eye protection is highly recommended. Avoid contact with the skin as much as possible.
Can I use galvanized nails in Cedar?
Hot-dipped galvanized, aluminum and stainless steel nails are all corrosion-resistant and all can be used to nail Western Red Cedar. Other types of nails, such as electroplated, are not recommended.
Does pressure treated wood corrode screws?
Metal products in contact with pressure-treated wood must be corrosion-resistant. Examples include fasteners (nails, screws and bolts), and all connecting hardware (joist hangers, straps, hinges, post anchors and truss plates).
Can you use joist hangers with treated lumber?
The chemicals used in pressure-treating lumber, including fire-retardant chemicals, are corrosive to bare steel. Stainless steel joist hangers are available for contact with more corrosive treated lumber.
Can you use zinc plated screws in pressure treated wood?
Fasteners for preservative-treated wood shall be of hot dipped zinc-coated galvanized steel, stainless steel, silicon bronze or copper. In the absence of manufacturer’s recommendations, a minimum of ASTM A653 type G185 zinc-coated galvanized steel, or equivalent, shall be used.
When should galvanized nails be used?
Galvanized nails are used mainly in construction, specifically roofing. They get their name from a process they undergo called galvanization. This process adds a protective zinc coating to the nail that prevents rusting and corrosion.
Can galvanized staples be used on pressure treated wood?
Different Grades to Choose From Electro-galvanized staples feature a thin layer of zinc coating for protection against the elements. However, these staples may corrode over time, and should not be used for ACQ-treated wood and similar types of material.
Can you use aluminum nails in pressure treated wood?
Nail manufacturers recommend that you go with aluminum or stainless steel fasteners when you’re using either of these woods—and whenever you’re using pressure-treated wood. (The preservatives incorporate salts that react with the zinc.) Also, never use galvanized nails with copper flashing.
Can you use hot-dipped galvanized nails in treated wood?
The manufacturers of ACQ, CA, ACZA and CCA and the treated wood industry are all recommending hot-dipped galvanized nails and stainless steel nails and screws with their treated wood products. Furthermore, they specify that the fasteners meet the ASTM A-153 specification for hot-dipped galvanizing.
What are roofing nails?
Roofing nails There are many different types of nails available, but nails for a roof are specifically designed for nailing shingles. Typically, roofing nails are made of stainless steel, but sometimes they are made of aluminum. They also have very large, broad heads compared to most other nails.
Can I use galvanized brad nails outside?
Yes. Galvanized nails are mainly used outdoors (though they are used indoors as well) when protection is needed to make the nails resilient to rusting.
Can you use Liquid Nails on treated pine?
Stabilising stone and interlocking masonry retaining walls. Bonding pavers to concrete. Stabilising loose stone steps. Sealing between treated pine logs to reduce soil loss.
Will Liquid Nails work on wet wood?
The five adhesives that work on wet surfaces are: Liquid Nails Fuze*IT. Loctite Power Grab HD.
Will Liquid Nail crack?
You see, liquid nails become brittle over time and will crack into chunks. It’s great at joining things together but it doesn’t exactly make a practical gap-filler.
