Table of Contents
The Bosch T101BR jigsaw blade is an ideal choice for cutting laminate materials. The blade cuts on the down stroke, not on the upstroke, the “R” in the product code referring to its “reversed” teeth. This is a popular blade often referred to as a worktop blade.
Can you cut laminate countertop with a jigsaw?
Plastic laminate is surprisingly easy to cut. You can do it with a circular saw, a jigsaw, a router or even some hand tools. Cutting a sheet laminate by itself is best done with tin snips or aviation snips, provided you’re cutting it oversize and will trim it later.
How do you cut an existing laminate countertop?
Turn the laminate counter upside down so that the finished side is facing downward. Use a tape measure to determine where you need to cut it and draw a line at the location with a pencil. Put on safety glasses and plug in a jigsaw. Turn the jigsaw on and move the blade along the pencil line to cut through the counter.
What kind of blade do you use to cut a countertop?
What blade should I use to cut laminate countertop? If you use a circular saw, it’s best to use a fine-toothed narrow blade with at least 40 teeth. When it comes to cutting laminate countertop, blades with carbide tips usually last longer than regular steel.
How do you cut laminate with a jigsaw?
Use the starter holes to start the interior cut. Insert the jigsaw blade inside the hole, aligning the blade with the cutting line while keeping the show flat against the laminate countertop. Turn on the jigsaw and let the blade get up to speed, then steadily move the blade against the material.
What is the best tool to cut a laminate worktop?
What is the best tool to cut a laminate worktop? A circular saw is often the best option to cut laminate worktops. Make sure the blade is sharp (replace the blade if you have been using it for a while) and suitable for fine cuts—it should cut through the worktop without any issue.
What is the best tool to cut Formica?
Use a circular saw or laminate shears to cut the Formica into large pieces. Do not try to cut a curve with a circular saw. Cut out the shape’s form, and leave the trimming for a finer saw and corners for a saw with a some flexibility.
How many teeth do I need to cut laminate?
Blades for Laminate Flooring Interestingly the same aluminum oxide is used to make industrial grade sandpaper! In view of this, a thin kerf, 80 to 100 tooth, carbide-tipped blade is most effective for cutting laminates and will last for about 1000 sqft before needing to be re-sharpened.
How can I cut my countertop without chipping?
You can minimize the potential for chipping if you use a finish blade with lots of teeth, making sure the sharp is keen. You can further reduce the chance of chipping by using masking tape along the cut line and cutting through the tape. As with all cutting, measure at least twice and mark the line well and clearly.
How do you cut countertops already installed?
If you want to remove more than one inch of the countertop width, you may cut at about 1/2 inch. If you are not able to cut right to the wall using a circular saw, you can finish the cut using an electric jig saw with a fine tooth metal blade or a special laminate blade.
Do you cut the tongue off the first row of laminate?
Place the first plank with the tongue side towards the wall, being sure to allow 1/8″ for expansion. We recommend cutting off the tongue on this first row to avoid any problem with the expansion gap. To start the second row, use the piece left over from the last plank of the first row.
What is the best blade for cutting worktops?
For solid and veneered worktops, you need a cross-cut, fine tooth saw blade with 48 teeth. For laminated worktops, it is advisable to use the triple chip grind saw blade, also with 48 teeth.
What is a 40 tooth saw blade used for?
Crosscut blades, made for cutting across the woodgrain (across the face of a board), have between 40 and 80 teeth and are designed for clean cuts. Smaller gullets separate the teeth. Combination blades can make both rip cuts and crosscuts.
What Mitre saw blade for laminate?
Miter saws typically use 10-inch or 12-inch blades, though they can accommodate larger blades for longer cuts or small blades for more precision. Another consideration is the blade kerf or thickness. Look for a thin kerf when working with laminate to make clean, precise cuts.
What is a carbide tipped saw blade?
With something like a carbide-tipped saw blade, the main body of the blade is made of steel. The small tips of carbide are brazed on to the body. A good carbide tip might hold an edge ten to twenty times longer than a tool steel tip. The carbide tip on a typical circular saw. Carbide tips do get dull eventually.
How do you cut laminate countertop with backsplash?
Attach a fine tooth blade to a jigsaw, and then use the saw to cut through the countertop along your drawn cutting line. Keep the saw going straight along the rear of the counter, removing the upturned section of the backsplash while leaving the laminate that covered the section untouched.
