Table of Contents
The ideal concentration of Chlorine in your pool is 1.0 ppm (parts per million). The best products are slow release types that are stabilized or protected from sunlight degradation. Tablets and sticks are two extremely popular shapes when it comes to everyday use chlorine.
What kind of chemicals do you need for an above ground pool?
Things you’ll be testing for include chlorine, PH, total alkalinity, Cyanuric acid (stabilizer), and calcium hardness. The levels need to be properly balanced for safe and clean water before swimming in it. The free chlorine level should be between 2.0 and 4.0 ppm. The PH level should be between 7.2 and 7.8.
Do you need to chlorinate an above ground pool?
Chlorine is essential for pool water because it kills harmful algae, bacteria and microorganisms. Make sure your above ground pool has enough by testing your water about every other day with chlorine test strips, such as these Aqua Chek Test Strips. Learn more about maintaining your pool’s chemicals.
What kind of chlorine do I need for my pool?
Type Sodium hypochlorite is a good option if the pool’s water filtration system struggles with high calcium hardness. Lithium hypochlorite has a higher range of 28 to 35 percent chlorine. Calcium hypochlorite is another non-stabilized pool treatment.
Do I need to shock my pool when I first fill it?
At first you’ll add chlorine in what’s called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning. Now it’s time to keep the water hardness in check, otherwise known as alkalinity.
How much chlorine do I add to my pool for the first time?
If the water is clean and clear, then add about 3 oz of liquid chlorine per 1000 gallons of water – while the pool filter is running. This should give you a chlorine level of about 3 ppm.
Can I use chlorine tablets in above ground pool?
Place chlorine tablets in the chlorine dispenser. The chlorine will dissolve over time and keep the water chlorinated. Install an off-line chlorine feeder made for an above ground pool to your filter system. Fill with granular chlorine and it will automatically dispense the chlorine at the rate you set for it.
Where do you put chlorine tablets in an above ground pool?
You simply place your chlorine tablets in the floater (based on gallons of water in your pool), and it does the work for you. The downside to a chlorine floater is that it is a passive system, so sometimes it can get stuck in one spot for a period of time.
Can I just throw chlorine tablets in my pool?
NEVER just throw them into your pool water. This will cause them to dissolve on the floor and it can damage and create a permanent bleach stain to your liner or concrete.
How long after putting chlorine in a pool Can you swim?
It is recommended to wait at least 20 minutes to an hour after adding water balancing chemicals. You should wait 2-4 hours (or one full cycle through the filter) to swim from the moment you use calcium chloride in your pool. It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours.
Which is better chlorine tablets or granules?
Chlorine granules, meanwhile, are simply scattered over a pool. Their combination of a smaller consistency and lower concentration makes them much more suitable for this purpose than chlorine tablets, as they dissolve more easily. This, in turn, enables them to fight pool bacteria much more quickly as well.
Is liquid chlorine the same as chlorine tablets?
Unlike liquid chlorine solutions that are nothing more than chlorine mixed into water, chlorine tablets are typically composed of chlorine and a stabilizing component which is usually cyanuric acid or CYA. The tablets add not just chlorine but also CYA into the water and this, in itself, is not a bad thing.
How much chlorine do I put in my above ground pool?
The ideal chlorine combination of your pool is between 1 and 3 parts per million (ppm). In order to kill pathogenic viruses, you’ll want to make sure your chlorine concentration doesn’t fall below 1 ppm.
Should I use 1 or 3 chlorine tablets?
In most cases, you’re best off with 3-inch chlorine tablets, as one single tablet can treat up to 5,000 gallons of water. On the other hand, 1-inch tablets contain far less chlorine (about half as much as 3-inch tablets), so they’re better suited for smaller indoor pools and spas.
What order do you put chemicals in a pool?
What Chemicals to Add When & Why Start by Testing Your Water. The first thing that you should do before you start adding chemicals is test the water. Alkalinity Levels. Manage pH Levels: Add Muriatic Acid of Soda Ash. Adjust the Calcium Hardness. Add Stabilizer (Cyanuric Acid) Add Chlorine.
What chemicals go in pool first?
Chemicals Needed for Pool Start Ups Stain & Scale Preventer. Granular Shock Chlorine. Chlorine Tablets. pH Increaser and/or pH Decreaser. Alkalinity and/or Calcium Increaser. Cyanuric Acid (Stabilizer) Algaecide and Clarifiers if needed. Complete Test Kit or Test Strips.
Why is my pool green when I just filled it?
Your first instinct when you fill your pool with new water, is to shock it. But that shock then oxidizes the metals, that chemical reaction then causes the green hue in your water. This is common with refills that used well water or even water that hasn’t been shocked but instead contains a high level of metals.
How often should I put chlorine in my pool?
Daily as needed and indicated by measurement. One caveat, however: if your total alkalinity and pH are not where they should be, you will find it difficult to keep enough free chlorine in your pool water. Adjust your alkalinity first, then correct your chlorine.
