Table of Contents
The Bosch T101BR jigsaw blade is an ideal choice for cutting laminate materials. The blade cuts on the down stroke, not on the upstroke, the “R” in the product code referring to its “reversed” teeth. This is a popular blade often referred to as a worktop blade.
Can you cut laminate flooring with a jigsaw?
A jigsaw is a real all-rounder when it comes to cutting laminate floors. It’s best used to cut out shapes from your board. For example, when you want to place boards around your toilet or maybe a pillar. Always use a fine toothed blade and have the saw blade spinning before you touch the board.
How many tooth saw blade for laminate flooring?
Diamond-tipped blades that are made for laminate and fiber cement usually have a low number of teeth to reduce the dust produced by cutting cement. However, typical circular and miter saw blades that are used for laminate will have 80 to 100 teeth for fine, precision cutting.
What saw to cut laminate flooring?
You can make straight cuts with a circular saw, a table saw or a chop saw. A blade with a tooth count of 100 or more is best, and to reduce chipping, its leading edge always should contact the face of the board. When cutting with a circular saw, this means turning the board over and cutting from the back.
What is the best tool to use to cut laminate flooring?
Jigsaw + special Laminate Cutting Blades The jigsaw is the best power tool to use to cut laminate floors with for a few reasons. It’s light, important because you’ll be picking it up all day. Also, the best blades are cheap.
Which way do you cut laminate with a jigsaw?
Guides and jigs are designed to make saws cut straight, so this is one time when you definitely don’t need one. You’ll still want to put tape over top of your cut line, clamp the board down, set your saw to the orbital setting, and then take extra care to follow your guideline as you cut.
How can I cut laminate without chipping?
You can minimize the potential for chipping if you use a finish blade with lots of teeth, making sure the sharp is keen. You can further reduce the chance of chipping by using masking tape along the cut line and cutting through the tape. As with all cutting, measure at least twice and mark the line well and clearly.
Can I use circular saw to cut laminate flooring?
A Circular Saw: You can also use a circular saw but it will require additional tools like a square and some type of work surface to cut the laminate flooring on. Sawhorses and a piece of plywood would make a pretty ideal workbench for this task and would be the easiest and most convenient method, in my opinion.
Does laminate flooring dull saw blades?
You see, laminate flooring will destroy a wood cutting blade with alternating top bevel (ATB) teeth in no time at all. The sharp points on this type of blade can’t handle anything that hard – they dull quickly and those tips are what the blade uses to cut cleanly through wood.
Do you cut laminate flooring face up or down?
4. Sawing laminate. If you’re sawing laminate with a hand saw, make sure you turn the good-looking side up. If you’re using a saw blade made for laminate, however, you should saw wit the good-looking side up, since a laminate saw blade as upside-down teeth, which means it splinters downward.
Can I use a jigsaw to cut vinyl plank flooring?
Vinyl plank flooring is an easy material to work with and install. It doesn’t need any special tools to cut the material to size. The cutting tools you can use include a laminate tile cutter, hand saw, table saw, circular saw, miter saw, jigsaw, or a Dremel.
Do you cut the tongue off the first row of laminate?
Place the first plank with the tongue side towards the wall, being sure to allow 1/8″ for expansion. We recommend cutting off the tongue on this first row to avoid any problem with the expansion gap. If it is too short, cut a new plank in half and use one half to start the second row.
How do you cut laminate flooring on the floor?
In fact, you can cut the planks using a table saw, miter saw, circular saw, hand saw or laminate cutter. However, using a diamond blade is recommended as laminate can be tough to cut through and may damage another type of blade. Typically, you will cut with the finished side up.
Does laminate flooring need to be nailed down?
Since laminate flooring is a floating floor, it is not meant to be attached to the subfloor by nails or glue. The floor needs to be able to expand and contract with temperature changes and therefore must freely lay on the underlayment or subfloor.
Can you cut laminate with a utility knife?
Yes. You can cut laminate wood flooring with a utility knife. The utility knife has all the power and cutting capacity to cut through laminate wood flooring whilst not chipping the blade off. A Carbide Tipped Blade or Carbon Steel Blade is best for cutting through laminate flooring.
How do you cut Wilsonart laminate flooring?
To precut Wilsonart RE-COVER laminate prior to bonding, we recommend using carbide tipped saw blades, router bits and laminate slitters. Cutting blades and router bits should be kept sharp and clean. laminate face down (adhesive side up) to ensure a clean cut.
