Table of Contents
What is a wet edge swimming pool?
The sleek and modern design of the wet edge pool can add a stunning dimension to your home in any yard. The overflow can be total or partial design; the water flows over the edges of your pool and/or spa and produces an incredible modern effect.
What is the most popular pool finish?
Plaster Finishes Plaster, a timeless option, is the most common pool surface finish. It’s a simple mixture of water, Portland cement, and either marble dust or silica sand.
What is the most popular wet edge color?
Our most popular Prism Matrix color, Indigo Blue.
What is the most durable swimming pool finish?
TILE POOL FINISHES When installed properly, glass tile represent the most durable of all swimming pool and spa interior surfaces. Glass mosaic tile is also resistant to chemical corrosion, impervious to liquids and vapors, resistant to fading, staining and discoloration.
How long does wet edge take to dry?
It can take anywhere between 8 hours to 16 hours before it’s fully cured. Be sure to apply thin coats. Applying Wet Edge too thick may cause problems with drying.
How much is a negative edge pool?
The average cost is $79,000 with an average range from $55,000 to $130,000. The base cost per square foot is about $80. These pools – also known as negative edge, vanishing edge or disappearing edge – are built to look boundless. Most owners want the edge to blend with the horizon, so having a good view helps.
What is the smoothest pool surface?
1. Plaster Finishes. Plaster finishes have been around since the 60’s and are the oldest method of pool finishing. They’re a mixture of white cement and crushed marble, and trowelled by hand to create a smooth finish.
What is the cheapest pool finish?
Plaster finishes are the cheapest and easiest to install, but they lack durability. Aggregates can be the most attractive but are slightly more expensive and more time-consuming. Tile finishes are the most expensive and take the longest, but their durability is top-notch.
Why are pools always blue?
In fact, barring unfortunate events such as in Rio, pool water will always look blue because of the way light and water interact. “You notice the blue effect when you have a large volume of water because of the way molecules are slightly absorbing light from the red end of the spectrum.
What is Pebble Tec?
A Pebble Tec® finish is purely cement and stone without calcium carbonate.
Is gunite the same as concrete?
There are two main things that differentiate gunite from concrete. Firstly, unlike concrete, which uses large and small aggregates, gunite only uses small particles. With gunite, on the other hand, a dry mix is fired through a hose with the water being added at the point of delivery.
Do gunite pools hurt your feet?
Many swimmers and children find the rough bottom in a gunite pool to be very abrasive and uncomfortable. It is not uncommon to scrape and or irritate your feet if the swimmer is in the pool for long periods of time and sitting on the pools steps or benches will certainly snag a swim suit.
How do you choose a pool finish?
The shallow end is going to appear lighter than the deeper water. In order to get blue water, you want a pool finish that has a gray, blue, or white pigment. For green water, you want to pick a darker finish with black, brown, tan, or green pigment. The water color and finish should complement the atmosphere.
How thick is wet edge applied?
To promote the best application experience with TotalBoat Wet Edge, the recommended application thickness is 3 mils (wet film thickness), being applied via brush, roll, or spray, to one of the substrates specified on the product as well as the product’s Tech Data Sheet.
How long before you can swim after pool plastering?
The plaster material cures under water in about 7-10 days. But this doesn’t mean you have to wait that long. Once the pool is filled and clean, you can go in for a swim.
Does pool plaster change color as curing?
One major thing to remember is that pool plaster can change colors or overall look as it sets and cures. Also, as the plaster cures, the appearance will change slightly. It is critical to maintain proper water chemistry during the curing process. If it isn’t properly maintained, a wide color variation may occur.
Are negative edge pools more expensive?
An infinity pool typically costs 20 percent more than a regular pool if you have the infinity edge on one side. If you have an infinity edge on more than one side of the pool, the cost percentage increases.
Are edgeless pools more expensive?
Many homeowners believe that infinity pools cost too much for them to ever own one themselves. It is true, however, that infinity pools are not cheap. Including a disappearing edge will add between $25,000 and $35,000 on average to the overall cost of your swimming pool.
How does a negative edge pool work?
Negative edge pools are also known as infinity edge. These unique swimming pools are identified by their exceptional design which allows water to flow over the edge and into a catch that recycles the water through the pool’s filtration system, sending the water back into the pool.
