Table of Contents
W – This is the thermostat terminal for heating. This wire should go directly to the heating source whether it be a gas or oil furnace, electric furnace, or boiler.
Where does w wire go on thermostat?
The white wire underneath your thermostat connects to your heating system. It terminates at your air handler or furnace. The white wire connects to terminal W in industry-standard thermostats.
What does R and W mean on thermostat?
W wire – heat. R wire – heat power. W wire – heat.
What is W1 and W2 on thermostat?
In a conventional system, W/W1 controls your heating system and, where applicable, W2 controls your heating system’s second stage, which helps warm the home faster. In conventional cooling systems, Y/Y1 controls the first stage of cooling and Y2 controls the second stage, which helps cool down the home faster.
What color is W on thermostat?
White Marking Wire Color Code Description W White Primary heat cell relay E Brown Emergency heat relay Y Yellow Primary cool call relay Y2 Yellow Secondary cool call relay.
What happens if you wire a thermostat wrong?
Potential consequences of improper installation could include: Electric shock. Blowing a circuit breaker. Damaging the thermostat unit, the electrical system or even the AC/furnace unit itself.
What does W wire do?
The W or W1 wire controls your heating system. In most systems, the Y or Y1 wire controls your cooling system. If you have a heat pump, your Y or Y1 wire controls your compressor. Your compressor is responsible for heating and cooling your home.
Where does W2 wire go on Nest?
If you have a W2, Y2 or O/B wire, you can put it into the *O/B connector, if needed. Gently tug each wire to check they’re secure, and make sure each connector that has a wire stays down. Push the display onto the base until it clicks. Download the free Nest app so you can control your thermostat with your phone.
Do I need ag wire?
You don’t necessarily need the wire but normally practice is to install a jumper between the Y and G at the furnace when repurposing the wire to the thermostat.
What color is W2 wire on thermostat?
White for W Terminal. W2 – This is the thermostat terminal used for second stage heat. There are gas furnaces with low fire and high fire and some depend on control from a two-stage heating thermostat with a W2 terminal.
Does white wire go to W1 or W2?
Thermostat White Wire (“W1” or “W2” Wire) W wires go directly to the source of heating; that may be a furnace (gas, electric, oil, you name it) or heat pumps (mini-split heat pumps included). W2 is designated for two-stage heating. Most heat pumps include second-stage heating and require the white W2 wire.
Is W the same as W1?
W – When you see a W terminal, it just means heat. Usually, you will only see W when the control only has one stage of heat. W1 – Means first-stage heat. In a heat pump, first-stage heat is the same as the first-stage cool.
What do the different color wires mean on a thermostat?
This is the most typical thermostat wiring style, and it applies to systems that regulate both heat and air conditioning. The wires are typically arranged as follows: red for 24-volt hot, white for heat, yellow for cooling, green for the fan, and blue for common (although the common wire may be a different color).
Does R go to RC or RH?
Here are some general guidelines: An R wire can go into a Nest Learning Thermostat’s Rc or Rh connector. The Nest Thermostat E only has an R connector, which is typically where an R wire would go. These are not jumper wires, and you can insert the Rc wire into the Rc connector and the Rh wire into the Rh connector.
What does the RH wire do on a thermostat?
What is the Rh wire on the Nest thermostat? The Rh wire is the power input to the heating system of your air conditioning. If the connection is not established, your air conditioning will stop working.
Should my thermostat be on E or F?
The thermostat fan operation switch, labeled FUEL SWITCH in the diagram below, is factory-set in the “F” position. This is the correct setting for most systems. The “E” setting will allow the fan to turn on immediately with the heating or cooling in a system where the G terminal is connected.
Are home thermostats universal?
To answer this question in one word: no, thermostats are not exactly universal. There are thermostats on the market that are specific to only a particular type of device, while others control multiple devices and multi-stage heating/cooling.
Can you change a thermostat without shutting off power?
The short answer is no, it’s not OK – you increased your risk of electrocution and that’s never a good thing specially for a DIYer.
Which wire is which thermostat?
Thermostat Wiring Tips If your thermostat controls your heat, you will have a white wire. The Y wire is yellow and connects to your air conditioning compressor. The G wire is green and connects to the fan. Rc and Rh: The red wire(s) are the power source for your thermostat.
How do you turn off the override on a thermostat?
Once you have selected the temperature, simply press the Hold button to keep the thermostat saved. This displays the word Hold on the screen and maintains that temperature indefinitely. If you want to resume the normal programmed temperatures, press the Run button to cancel the override.
