Table of Contents
Thistle MultiFinish is a gypsum finish plaster for use on a wide range of backgrounds. It provides a smooth, inert, high quality surface to internal walls and ceilings, and a durable base for the application of decorative finishes.
How long does thistle multi-finish plaster take to dry?
Plasterboard takes on average 2-3 days to dry when plastered, whereas backing plaster takes 4-6 days.Painting New Plaster – Everything You Need to Know. Type Use Setting Time Multi-Finish Topcoat for browning and bonding 1-1.5 hours Board Finish Topcoat for plasterboard 1-1.5 hours One Coat Small DIY jobs 2-2.5 hours.
How thick can you apply thistle multi-finish?
What thicknesses are plasters applied? Undercoat plasters are usually applied at 11mm and most finish coat plasters are applied at 2mm. Recommendations for the application thickness of Thistle plaster products can be found in our selector guides: ThistlePro Selector Guide, Thistle Essential Selector Guide.
Can you second coat plaster the next day?
house and home New Member. if you do your 2nd coat the next day chances are the first coat will be bone dry and its so pourous it will literally drink any moisture out of your 2nd coat making it almost impossible to finish/polish!Sep 3, 2008
How thick can you put bonding on?
Floating coats should be applied at a thickness of 8mm, up to a total plaster thickness of 25mm, and wire scratched between each coat. The final floating coat should be ruled to an even surface and lightly scratched to form a key for Thistle finish plaster, such as Thistle MultiFinish.
What consistency is multi finish?
As you near to the finished mix you’re looking for a smooth, almost creamy consistency. If it’s still too watery then simply add more plaster a bit at a time until it feels right.
Does Multi finish go off?
Plaster like many dry goods is hygroscopic and therefore absorbs moisture out of the atmosphere. This make a reaction within the plaster mix and begins it setting or going off. When you use old plaster it seems OK at first but then quickly sets hard.
How long can you keep an open bag of plaster?
What is the shelf life of plaster? Plaster can be stored 3-6 months if it is stored in a cool, dry place, protected from extreme heat and cold, direct sunlight and at a temperature above 45°F (7°C).
Is Multi finish waterproof?
It is completely waterproof and air-permeable which allows trapped moisture to evaporate.
What happens if you use an expired plaster?
Do plasters expire? Yes, over time, plasters can lose their adhesiveness. If your plasters are sterile, the wound pad can also lose its sterility.
Can I use bonding plaster to fill holes?
Bonding coat can fill large holes/chunks. It’s all in the mix – your looking for a whipped cream consistency. I find it makes it very easy to apply. Slap it on and leave it rough, don’t try to finish it when it’s just been applied.
How much will a bag of multi finish cover?
Well if you go by the spec a bag of Multi and Board finish will cover 10.25-75 m2 at a coverage of 2mm on Plaster board.
Why is there a shortage of multi finish plaster?
The multi finish plaster shortage was down to British Gypsum closing their production lines when they followed Covid-19 government guidelines. So naturally, multi finish plaster was going to be in demand. The few who could get hold of multi finish plaster were not using it to plaster with.
Can you do 3 coats of plaster?
How many coats of plaster do you need to plaster a wall? You should prepare to apply at least two coats, in order to achieve a smooth finish. However, if you can still see obvious grooves and indents after the second coat dries, you can trowel on a third coat using the method mentioned in Step 7 of this guide.
How much do plasterers charge for skimming?
Repairing or re-skimming over existing plaster to correct blemishes in plaster. For a small room, prices range between £380 and £500. For medium rooms, you can expect to pay from £420 and £550 respectively. Average duration is between 1 and 2 days depending on the size of the room.
How long does Multi-finish last?
Member. You can use plaster that is a couple of months out of date because when it is bagged, they always add a margin of uncertainty to ensure that it is still useable up to the expiry date. This margin is usually 1-2 months after the expiry date.
What happens if you put plaster on too thick?
The plaster tends to ripple if it is being applied too thick. If the plaster is thin, it may be a bit harder to control on your hawk but does ensure that a thin coat can be applied. 3. Make sure the plaster is not being applied too thick – 2mm is ideal.
How much does a plasterer charge per day?
How much do plasterers charge per hour? Plasterers don’t only charge per job or per day. They also charge by the hour as well. A typical hourly rate, depending on whereabouts you are in the country but can be from £8 to £19 per hour, with a median of about £12 per hour.
Is board finish better than multi finish?
Board Finish is for low to medium suction whereas Multi-Finish is for nearly all variations of suction.
What’s the lowest temperature you can plaster in?
At 32 degrees Fahrenheit (0 degrees Celsius) and below plaster will freeze on the wall and cause weakening of the plaster. Damage to the plaster can be so severe that you can rub it off the wall by using your hand.
What’s the difference between skimming and plastering?
Skimming is the name given to a plastering technique where a wall is plastered with a layer of thin coat. They are both used to decorate buildings and increase the durability of a wall, but skimming is done to upgrade an old building whereas plastering is done to a new one.
Is Multi-finish plaster the same as finishing plaster?
Multi-Finish Plaster: Thistle multifinish is a top coat plaster which is suitable for a great finish on all the other surfaces. Multifinish is ideal for (indeed, is manufactured for) using as a finishing plaster when there are a variety of backing surfaces to be covered.
What temperature can you use Multi finish?
Once fully set and dry, Thistle MultiFinish is only suitable for situations where the temperature does not exceed 49°C. Dry, bagged plaster is not affected by low temperatures. During the application of gypsum plasters in hot and / or dry conditions, care should be taken to ensure that rapid loss of water is avoided.
How much does 25kg of plaster cover?
bags the coverage is 4-6 square metres per 25kg.
