What Is The Wood Around A Door Called

What Is an Architrave? The architrave (sometimes also referred to as jamb casing) is part of the door casing and refers to the decorative trim that sits around the door frame. It is purchased separately to the frame, which is what the wood around the door frame is called.

What is the wood around an exterior door called?

The two pieces of trim that go on either side of your door are known as “pilasters” while the top piece is called a “lintel”. Sometimes, the entire unit may be referred to as the door casing, with the top piece being known as the header.

What are the parts of a wooden door called?

Door part names Door frame. The door frame is the entire framework supporting the door, including the sill, jamb and head. Sill. The door sill is the very bottom part of the door frame that rests on the floor. Jamb/door jam. Head. Panel. Astragal. Fixed panel. Door sweep.

What is a door jamb and casing?

Door head: The horizontal component found just above the door, with two grooves the door jambs are built to fit into. Jamb casing: Also called an architrave, this is a decorative trim mounted to the wall around the frame. It’s generally separate from the frame itself, meaning it can be removed or replaced easily.

What is a door architrave?

Architrave is a common door feature found within most homes. Sometimes it is also known as door trim. Also known as a door surround or door casing, the term Architrave originated from Greece many years ago translated from the Greek word Epistyle.

What do you call the trim around a door?

Casing: Trim used around door and window openings. Exterior casing trims the exterior of windows and doors.

What are the parts of an exterior door?

Parts of a Door Doorway. A doorway is one of the easiest parts of a door to see. Door Frame. A door frame is what supports the door and consists of the head, jamb and sill. Head or Door Head. The door head is a horizontal section of the door frame that is located at the very top. Door Panel. Jamb. Sill. Threshold. Rail.

What do you call the piece of wood at the bottom of a door?

Sill / Threshold · The bottom or piece of a door. Usually made from aluminium or wood.

What is Astragal?

A t-astragal molding is a functional door molding designed to close the clearance gap created by the side edges on one or both matching doors; they also stop the swinging door and help reduce sound when closed. The square side of the t-astragal attaches to a door stile edge on either sliding or swinging doors.

What are the parts of a door hinge called?

Most hinges consist of three basic parts: leafs, a knuckle and a pin. Leafs are the rectangular-shaped plates on the sides of a hinge. A knuckle is a cyldrical-shaped tube that’s created when the leafs are joined together.

Is door casing and door frame the same?

Interior door casing is the term used to describe the trim found around a door opening. Basic doorway casings are made up of just three separate pieces – two long trim pieces on either side of the door frame topped with a shorter piece (the head casing) to complete the frame.

What is the difference between a door frame and door casing?

Generally door frames are used for external doors and door linings or casings for internal doors. Typically trenched linings or casings are used for standard door sizes, whereas untrenched linings or casings may be used for non-standard sizes and old doors where some flexibility is required.

Is a door jamb the same as a door frame?

A jamb is the flat surface that runs vertically up either side of the door frame. This is where the hinges are placed to hang the door, as well as the striker plate on the opposite door jamb which helps you to open, close and lock your door. The door frame is all the elements combined.

What is the purpose of architrave?

Architrave conceals the joint and any shrinkage or movement that may occur between the wall and the casing within the door surround.

Do you need architrave for a door?

You may be thinking why is it necessary to use architrave? The simple answer is that is not a necessity but there are many reasons that you should consider using it as part of your interior design. Architrave can be used to add style to a room and can be seen as more than just a finishing touch.

What is the difference between architrave and skirting?

Architrave is the frame that borders around a door or window, while skirting is the board that runs around the room along the floor and at the bottom of a wall.

What is the difference between casing and trim?

Trim is a general term, often used to describe all types of molding and millwork. Casing is a type of molding, typically used to trim the perimeter of windows and doors. Base molding (or baseboard) is a type of molding, which is applied where the wall and floor meet.

What are the different types of trim?

15 Types of Trim You Should Know of 15. Crown Molding. Given its name, it’s no surprise that crown molding is the king (or queen!) of trim. of 15. Baseboard. of 15. Chair Rail. of 15. Picture Rail. of 15. Picture Frame Molding. of 15. Panel Molding. of 15. Door or Window Trim (Casing) of 15. Pierced Molding.

What is a door mullion?

A mullion is a part of a frame that divides or separates the frame into different sections. On a detailed hollow metal frame, for example, a mullion will separate pieces of glass, panels, or will separate a door and the glass or panels. On a pair of doors a mullion can separate the two doors from each other.

What is the metal strip at the bottom of a door called?

A door sweep is a long strip of metal that holds a seal made of a material such as neoprene, silicone, or a nylon brush. This long strip of metal is surface mounted to the bottom of the door.

What is the metal plate at the bottom of a door called?

Door kick plates are a sheet of material attached to the bottom of your door to protect it from damage. They get their name from when people kick the door open when they have their hands full. So this is why you’ll see them in commercial and public buildings.

What is a door flange?

This term actually refers to a milled piece of wood that is used around the exterior of a window or door; and the exterior siding, stucco, or brick would butt up to it. Nowadays, this term also refers to vinyl and metal exterior flanges with a similar profile to the wooden ones.