Table of Contents
Trim on a home’s exterior typically includes the material that edges the windows and doors, the fascia board that runs along the lower edge of the roof and the soffits beneath the roof. Traditionally, whether a home has brick, stucco or stone siding, the trim material is wood.
What is considered the trim on a house?
Trim is the material used to encase windows and doors, among other features, on a home’s exterior. Fascia is a horizontal or angled board that encloses the edge or face of the projecting eaves.
What is the trim around a house called?
Casing refers to the trim used around interior or exterior windows and doors. Casing is designed to cover the unfinished gap between walls and door or window frames.
What all is considered trim?
A Primer on Interior Trim Shoe Molding. Narrow, rounded trim that conceals the joint between the baseboard and the finished floor. Baseboard. Wide, flat trim installed at the base of the walls and against the finished floor. Base Cap. Head Jamb. Head Casing. Side Jamb. Side Casing. Chair Rail.
What is an exterior trim?
The finish materials on the exterior of a building, such as moldings applied around openings (window trim, door trim), siding, windows, exterior doors, attic vents, crawl space vents, shutters, etc. Also, the physical work of installing these materials.
What is the trim on walls called?
What is wall trim? A wall trim — also called interior trim — is a general term often used to describe all types of molding and millwork. It is used to frame windows, doors, walls, floors, even ceilings — defining the architectural style of a room.
What is siding trim?
4.4.1 INTRODUCTION. Siding and trim of a building – whether on residential or commercial buildings – are the ‘skin’ of the building which protect the building from the elements while also reflecting the style and character of the building.
What is the edge of a house called?
Eave. An eave is the part of the roof that hangs over the side of the home. Otherwise known as an overhang, eaves are designed to push water clear of the siding.
What are the four types of moldings?
Here’s a quick look at where to apply specific types of moulding in your home: Wall and ceiling: Chair rail, panel moulding, wainscoting, picture rail and crown moulding. Floor: Baseboard moulding. Doors and windows: Casing or architraves.
What is the difference between molding and trim?
WHAT’S THE DIFFERENCE BETWEEN MOLDING AND TRIM? TRIM is a general term that refers to all molding in a home (i.e. window casing, door casing, baseboards, etc.). MOLDING (or moulding) is a broad classification of millwork (any type of woodwork that is produced in a mill …May 8, 2019.
Do you paint the side of exterior trim?
Before any finish paint is applied, all exterior surfaces should be clean and in good repair. When all the prep and priming is done, it’s time to apply the finish paint to the siding and trim. In most cases, you will want to paint the siding on your house first, and then paint the trim.
Do House Painters fix trim?
While the elements will inevitably take their toll on your home’s trim, you can count on the dedicated professional house painters at Curb Appeal Painting to repair or even replace your wood trim.
What is exterior trim made of?
The most classic choice for exterior house trim is wood. Solid wood, as well as composite options, are available. Many homeowners prefer wood trim because of its natural look and feel but quality wood products are becoming scarcer, and therefore more expensive.
What is the trim between wall and ceiling?
Crown. This molding is the “crowning” architectural feature of a room, as it decorates the transition between walls and the ceiling. Crown moldings, also known as cornice moldings, typically boast intricate silhouettes—although many types of crown molding exist.
What is the molding called?
Moulding (also spelled molding in the United States though usually not within the industry), also known as coving (United Kingdom, Australia), is a strip of material with various profiles used to cover transitions between surfaces or for decoration.
Does siding go under trim?
That said, the trim goes on first when installing lap siding.
What are the parts of house?
Parts of the House kitchen. bedroom. bathroom. living room. dining room. nursery. garage. porch.
What part of the house is the fascia?
The fascia is the attractive board along the side of the overhang and the roof that helps your roof appear finished. Your gutter sits atop the facia board. The fascia is also known as a “transition trim” between the home and the roofline. The fascia supports the shingles and helps to keep moisture out.
What is side of building called?
A façade or facade (/fəˈsɑːd/ ( listen)) is generally the front part or exterior of a building. It is a loan word from the French façade (pronounced [fasad]), which means ‘frontage’ or ‘face’.
What is the difference between casing and trim?
Trim and molding are decorative wood pieces that border or line features of your home. When these items are placed around doors and windows, they are called casings (imagine a picture frame). They can be added to the existing architecture of your home and enhance the features already present.
What is trim on floor called?
Baseboard is the trim that defines where the floor ends and the wall begins. Baseboard is usually thinner than door trim, which is called casing, and at least one-third wider.
Can you use baseboard as door trim?
Can you use baseboards as door trim? Yes, you can use baseboards as door trim. However, it can look visually unappealing to some due to the thickness of regular door trim versus, baseboard trim. Both baseboards and door trim have similar installation methods, mainly because the same product can be used for both.
What are baseboards and trim?
Baseboard is the wood (or other material) board that runs between the floor and the wall. Trim is a broad term that encompasses baseboard and other trim throughout the home.
Should house trim be uniform?
Rule 4: Trim Should Always Be White White trim and molding have not always been the standard choice. Trim color goes with the trends just like wall and decor. White trim and molding looks crisp and complements most wall paint colors and works in every decorating style.
What is colonial trim?
Colonial architecture accounts for a large period of American history during the 17th and 18th centuries. The Colonial Style moulding collection is inspired by the refined and classical Georgian period with its Palladian influence of proportions and details.
