Table of Contents
The top of the doorway is called the head, door header or door head. What is a door jamb? A door jamb runs vertically along the side of the door. It helps provide support for the door panel and door frame.
What are parts of a door frame called?
Parts of a Door Frame Sill. It is the bottom part of the frame which is sealed or fastened to the floor. Door Jambs. It is the vertical member of the frame which supports the door opening. Head Jambs. It is the member which running horizontally and situated at the top of the frame, Horn. Threshold. Sidelight. Transom.
What are the three main components of a door frame?
The body of any door is essentially made of three main parts: the stiles, rails and panels but there are many more elements. To help explain the most common terminology, here we have put together an illustration of a standard door and door frame, with the component parts highlighted.
What is the difference between a door jamb and a door frame?
Many people confuse a door jamb and a door frame. A simple way to remember it is that a door jamb is part of a door frame. The flat surface that runs vertically up either side of the door frame is the jamb.
What is the decorative frame around a door called?
What Is an Architrave? The architrave (sometimes also referred to as jamb casing) is part of the door casing and refers to the decorative trim that sits around the door frame. It is purchased separately to the frame, which is what the wood around the door frame is called.
What is a strike plate?
Strike Plate This is the plate the latch-tongue, or deadbolt-tongue will connect with. It should sit flush with the door jamb. Any passage or privacy set needs to have a strike plate for the door to latch. Additionally, deadbolts need a strike plate to properly lock.
What are the parts of a door latch?
Parts of a Door Lock Knobs and Handles. The common door lock will have two knobs or handles—one on the inside of the door and one on the outside. Rosette. The rose or rosette is typically a round plate that serves two functions. Lock Cylinder. Spindle. Latch Assembly and Spring Bolt. Deadlocking Plunger.
What is tied at the top of the door when building a house?
Answer: joists are the ropes tied at the top of the door when building a house.
What is the hole in the door frame called?
Bore holes are the holes in the door that house your door hardware and allow it to be installed. The cross bore is the main hole drilled into the face of the door where the body of the lock (chassis) is installed.
What is a door stile and rail?
Stile and rail doors are constructed from horizontal rails and vertical stiles, with panels secured in between. Together, they give the illusion of a single carved piece of wood. Unlike a flat panel or flush wood door, making a stile and rail door requires more precise and complex construction techniques.
What is a door mullion?
Mullion. A mullion resembles a stile. It is the vertical component that separates two panels located in the middle of the door between the rails.
What is a cased frame?
What is a cased opening? A frame without embossing for hinges or strikes. It is used to finish an opening where no door is required.
What is a jam on a door?
A jamb (from French jambe, “leg”), in architecture, is the side-post or lining of a doorway or other aperture. A doorjamb, door jamb (also sometimes doorpost) is the vertical portion of the door frame onto which a door is secured.
What is a door riser?
Riser doors are access panels which are suitable for walls and they can provide up to 120 minutes fire protection, to cover any opening in a wall. Our riser doors are particularly easy to install, as they come fitted with the EziFit hinge system.
What is door sash?
1 : a frame for a pane of glass in a door or window. 2 : the movable part of a window. More from Merriam-Webster on sash.
What is a door reveal?
The Reveal is a timber surround fitted to the fin of the window or door and used for installing the product into timber framing. The reveal becomes the frame of your window or door covering the stud. The architrave attaches to the reveal to cover the gap between the reveal and the plasterboard (or internal lining).
What is a door reinforcement plate?
Reinforcers or door wrap around plates are three-sided metal plates that encase and strengthen the door around the latch, which is a door’s most vulnerable area. recess into the door edge so the reinforcer fits flush.
What is a door security plate?
Door Security Guard Plates. Protect your doors from tampering and latch prying with steel security latch protector plates.
What is a door tongue?
The beveled “tongue” spring mechanism that extends from the edge of the door into the door jamb to hold the door shut when closed.
What is a mortise plate?
A mortise refers to the pocket cut into the door where the lock is fitted. Strike plate–the metal plate affixed to the door jamb with a hole for the bolt of the lock to slide into, keeping the door closed.
What are parts of a door knob called?
The main parts of a door lock are the cylinder, bolt, box and strike plate.
What is a framing carpenter?
Framing carpenters construct or repair the framework of commercial, residential, and industrial buildings. They determine the dimensions of the framework to be constructed, measure, and cut the required building materials accordingly, and assemble the materials to form the framework.
What are the 3 types of framing for wood structures?
Modern wood framing essentially includes three types: balloon, platform and semi-balloon framing. With long lumber lengths, vertical load-bearing framing studs run continuously from foundation to roof.
What is a platform framing?
In platform framing, each floor is framed separately, as contrasted with balloon framing, in which the studs (vertical members) extend the full height of the building. Freed from the heavy timbers of the post-and-beam system, platform framing offers ease of construction.
