Table of Contents
1/4-Inch Drywall: The thinnest of all the options, 1/4-inch drywall is most commonly used as a skimming material. Mount it over an existing layer of wall to refresh the look and hide old blemishes. It’s ideal for walls with a subtle curve to them.
Where can I use 1/4-inch drywall?
Quarter-inch drywall is often used to cover damaged plaster walls and also for curved areas because it bends easier than thicker drywall. Then the 1/4-inch-thick drywall can be double layered to get to the conventional 1/2 inch thickness to match the rest of the wall.
What is the minimum thickness of drywall?
The most common thickness of drywall used in residential interior construction is 1/2 inch. This material is recommended for walls with studs placed 16 inches on center. If the wall studs are placed 24 inches on center, a 5/8-inch drywall is recommended.
How thin does sheetrock come?
Drywall comes in various thicknesses, 3/8 inch and 1/2 inch being the most common. Thicker sheets are needed if nails or screws will be far apart — for example, if there is a large gap between studs or joists.
What thicknesses of sheetrock are there?
Drywall is sold in several standard thicknesses: 1/4-inch (6.35mm) 3/8-inch (9.52mm) 1/2-inch (12.7mm).
What is purple drywall?
National Gypsum has developed Purple drywall that is moisture, mold, and mildew resistant. This means less water and mold damage in homes keeping construction debris from landfills. In addition, within the line of Purple drywall products, are sheets that stand up to abuse and impact.
What is the difference between gypsum board and sheetrock?
The difference between gypsum and drywall is that gypsum is a naturally occurring natural mineral used for construction work. At the same time, drywall is a manufactured product with gypsum as one of its raw materials. A lot of properties of the drywall are because of the gypsum plaster present in it.
Can you use 1/2-inch drywall ceiling?
1/2-Inch-Thick Drywall Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings. These panels are easy to carry and hang.
Is sheetrock better than drywall?
Drywall and sheetrock are really the same thing. Sheetrock is a brand of drywall patented by the US Gypsum Company. Both are used to make walls and ceilings. Aside from a few chemicals that allow the sheetrock formula to be patented, there is really no practical difference between drywall and sheetrock whatsoever.
What is the fire rating of 1/2 drywall?
The fire rating for the 1/2-inch drywall used throughout the rest of the home is 30 minutes. As added benefits, Type X absorbs sound slightly better and is slightly stronger than conventional 3/8-inch or 1/2-inch drywall.
What is the most common thickness of drywall?
Most drywall measures 1/2-inch thick. It’s the most common choice for interior walls because they are easy to carry and hang. If weight is a concern, consider ultra-light half-inch drywall.
What kind of drywall do you use in a garage?
Drywall is the easiest and most economical covering for your garage ceiling. Use 5/8-in. -thick drywall if your trusses or rafters are spaced 24 in.
What kind of drywall do you use for a garage ceiling?
Standard drywall panels contain compressed particles of gypsum covered with thick paper. That’s fine in your home, but unless you’re finishing your garage as a living space, complete with insulation and a heat and air system, moisture-resistant drywall is preferable.
What is the difference between standard and lightweight drywall?
Lightweight: Lightweight drywall is generally used the same way as standard drywall, but it’s easier to carry and hang because it’s 25% lighter. Fire-Resistant: This type of drywall normally contains chopped fiberglass in its core for extra fire resistance.
Is it better to hang drywall vertical or horizontal?
On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. For walls 9 feet high or shorter, hanging the drywall horizontally has a number of benefits. Fewer seams. Horizontal hanging reduces the lineal footage of seams by about 25%.
Can you use green board on ceilings?
Special care must be taken when putting greenboard drywall on ceilings. It’s heavier and a bit weaker than standard drywall which can lead to sagging issues. With the strapping in place you can install the greenboard with drywall screws used liberally.
What is green Sheetrock?
Green board drywall, also known as moisture-resistant drywall, has a green covering that makes it more resistant to moisture than regular drywall. It is also often used as a tile backer in limited wet areas such as bathroom and basement walls, plus kitchens, and laundry and utility rooms.
What is the difference between PURPLE and green Sheetrock?
What’s the difference between PURPLE drywall and traditional green drywall? Traditional green drywall (also known as greenboard) is only moisture-resistant. PURPLE drywall, manufactured only by Gold Bond Building Products, is superior because it offers moisture, mold and mildew resistance.
What is XP gypsum?
XP® Gypsum Board was designed to provide extra protection against mold and mildew compared to standard gypsum board products. The face paper is folded around the long edges to reinforce and protect the core, and the ends are square-cut and finished smooth. Long edges of the panels are tapered.
How much is a 4×8 sheet of Sheetrock?
The average price for drywall and sheetrock is $15 per 4′ x 8′ panel, with a typical range of $12 to $20 per panel. This translates into a cost of $0.40 to $0.65 per square foot.
What is Sheetrock called in the UK?
Plasterboard is also known as gypsum board, drywall, wallboard or wall panels. Commercial brands for plasterboard in the UK include GTEC and Gyproc.
Why is sheetrock so expensive?
There are a bunch of reasons drywall prices can rise. As with most commodities, increased demand or decreased supply can have an affect on drywall board prices. You don’t want to set up your construction loan and then find out prices have skyrocketed for the building materials.
