Table of Contents
Called Torx, 6 point, and star, Torx are a 6 pointed star shaped screwdriver. Originally designed in the 60’s to outperform hex screws, Torx is a trademarked name for a screwdriver that fits Torx screws, commonly seen in sizes Torx 6 to Torx 40 (or T6 to T40).
What are the names of screwdrivers?
Types of Screwdriver. Flat Head (or Slotted Head) Screwdriver. Phillips Screwdriver. Pozidriv Screwdriver. Robertson or Square Screwdriver. Torx Screwdriver. Hex Screwdriver or Hexagon Screwdriver.
What is a pointed screwdriver called?
Phillips. A Phillips screwdriver has a head with pointed edges in the shape of a cross, which fits neatly into the cross slots of a Phillips screw.
What is a star screwdriver?
A trademark for a screw with a head having a socket shaped like a six-pointed star and for a screwdriver with a tip that fits it.
What are the 3 types of screwdriver?
What are the Screwdriver Types? Flat Head or Slotted Screwdriver. This screwdriver type is probably the most common form of hand tool. Phillips Screwdriver. Torx or Star Screwdriver. Hex Screwdriver. Pozidriv Screwdriver. Robertson or Square Screwdriver. Tri Wing Screwdriver.
What are 5 different types of screwdrivers?
5 Types of Screwdrivers Every DIYer Should Get to Know Screwdriver Operation. SCREWDRIVER TYPE: Flat/Slotted. SCREWDRIVER TYPE: Phillips. SCREWDRIVER TYPE: Hex Key. Screwdriver Type: Robertson. Screwdriver Type: Torx.
Why is it called Phillips screwdriver?
Henry Frank Phillips (June 4, 1889 – April 13, 1958) was an American businessman from Portland, Oregon. The Phillips-head (“crosshead”) screw and screwdriver are named after him. Thompson who, in 1932, patented (#1,908,080) a recessed cruciform screw and in 1933, a screwdriver for it.
What is flathead screwdriver?
A “slotted flat blade screwdriver” is a long standard hand-tool dating back to the 1500s. It has a flat-bladed tip used to turn, fasten or loosen screws and bolts. It has a handle for grip and comfort, a shaft and a head or blade at the end of the shaft.
What is a Cabinet screwdriver?
Cabinet– Due to their similarities, the average Joe might confuse cabinet tips with keystone. Both designs feature the flat head shape, however, cabinet tips have a straight blade profile. The tip and blade have the same width, which comes in handy when reaching into confined spaces where screws are recessed.
What are Phillips screws?
Noun. 1. Phillips screw – a screw with a special head having crossed slots. screw – a fastener with a tapered threaded shank and a slotted head. trademark – a formally registered symbol identifying the manufacturer or distributor of a product.
What is the star shaped tool called?
Torx (pronounced /tɔːrks/) is a trademark for a type of screw drive characterized by a 6-point star-shaped pattern, developed in 1967 by Camcar Textron. A popular generic name for the drive is star, as in star screwdriver or star bits.
Is a star bit the same as a Torx bit?
There’s some confusion about the differences between them, especially the Torx and star bits. The difference between Torx Bits vs Star Bits is that Torx is the trademark name, while star represents the generic descriptor – the terms can be used interchangeably, as the tools are identical.
How do you unscrew a 6 point star screw?
For security torx screws you will need to insert the flat head in against one of the outer grooves and the center nub of the head. This works much the same as non-security torx screws. Security torx screws will usually turn the opposite direction, so you should turn clockwise to remove them.
Which tool is intended for loosening or tightening a star like screw?
A torx tamper-proof (TPX) type screwdriver is used for tightening or loosening tpx style screws. Tamper-proof screws feature a star shaped recess with 6 rounded points and additional protection from unauthorized access designed for applications where tampering could be a problem.
What is a hexagon screwdriver called?
Allen Wrench Hex or Allen keys may not look like the typical screwdriver with a distinct head, shaft and handle, but rather an L-shaped piece of metal with hexagonal ends. They fit into hexagon-shaped holes in screws. Sizes: Allen wrenches usually come in standard sizes, according to Hunker.
What are the different types of screw heads?
The two basic screw head types, countersunk and non-countersunk, include various unique designs.The different screw drive types include: Slotted. Phillips. Phillips tamper-resistant. Combination. Hex external. Hex internal. Hex tamper-resistant. Square recess.
What is a triangle screwdriver called?
A triangle screwdriver is a tool used in the setting and removal of specific, rarely used types of screws and bolts commonly referred to as triangle recess or TP3 screws. These fasteners are a type of security screw found in certain kinds of toys and battery packs.
Is there another name for a Phillips screwdriver?
Phillips Screwdriver Also known as cross-head screwdrivers, Phillips screwdrivers are one of the most common types. But what is a Phillips head screwdriver? These tools are designed to fit screws with Phillips heads, which have a cross-shaped recess – hence the alternative name of cross screwdriver.
What is Panhead screw?
A pan head self-drilling screw has a rounded base and a flat head that sits on top of the material it fastens. With its large diameter and high edges, the drive slot is deep, which allows for increased torque while minimizing the risk of damage to the screw.
Why is Phillips head flat?
Since a standard flat-head didn’t fit cleanly into the head of a screw, Phillips designed a different screwdriver to fit his new invention. This helps keep the screw from being overdriven, which can damage the screw, the screwdriver, and the material the screw is in.
