Table of Contents
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches.
What size blind fits a standard window?
The standard sizes of window blinds ought to match these and can be found in most stores: Picture windows: 1–8 feet high, 2–8 feet wide. Double-hung windows: 36–72 inches high, 24–48 inches wide. Sliders: 24–60 inches high, 36–84 inches wide.
What is common blind width?
Blind Slat Sizes Common slat widths are 1/2 inch, 1 inch, or 2 inches, which is the most popular width. Smaller slats look proportionate on smaller windows, and they offer a more subtle look that blends in with the surroundings.
How much smaller should blinds be than the window?
Not Adding Width To Outside Mount Blinds We recommend going at least 2″ wider than the opening on either side, so 4″ total. For the height, go about 3 inches above the window trim (to allow for the mounting brackets) and measure from that point down to the window sill.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
How much space needed for inside mount blinds?
3⁄4″ is the minimum depth required for inside mount blinds.
Should blinds be flush with wall?
1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
How do I choose a blind size?
Measure both the width of the window and the height of the window. Consider adding an extra 3 inches to the width and height for optimum light control and privacy. Extending the blinds outside the window will also provide the space needed for the mounts and help the window appear larger than it actually is.
Are blinds true to size?
The gap on either side of the blind will vary depending on the type of blind or shade, but most blinds are cut to be 1/2 inch smaller than the smallest width of the window. When measuring for blinds you should measure the width at the top, middle and bottom and take the smallest measurement.
How much space do you need between blinds and window frames?
To minimize light leakage the blind should overlap the window opening by at least 1 1/2″ on each side for a total of 3″ on entire width. 2) Measure distance from where the top of the blind will be located to the window sill. The blind should overlap the window opening on the top by at least 1-1/2″.
Can you put two blinds one window?
When you hang multiple blinds in the same window, each blind has its own headrail and is installed separately, so you can operate them individually. For two (2) separate blinds in one window, take the smallest width and divide it by 2. Then add 1/4″ to the width of each blind.
How shallow is too shallow for inside mount blinds?
Window treatments like traditional blinds or shades look their best when mounted inside your window frame. The problem is that if your window’s sill is less than 1.5”, there’s not enough room for the mounting brackets for your blinds and shades to fit.
How far should blinds stick out?
A typical 2 inch window blind needs a minimum of an inch and a half but at least 3 inches for a flush mount. A flush mount blind is on that is completely recessed in the window frame and nothing is protruding out of the window frame.
Are blinds better inside or outside recess?
Why fit outside of the recess? The main advantages of hanging your blinds outside of the recess are that more light will enter the room when the blinds are open. You can block out more light when the blinds are closed. However, any items that you have placed on the windowsill won’t be visible when you close the blinds.
Which type of blinds are best?
In this case, blackout vertical blinds or wooden blinds are perfect. Both blind types will let the light in without fully exposing your window during the daytime and give you maximum privacy in the evening and at night. Vertical blinds are a cost-effective choice, whereas wooden blinds are an investment.
How do I measure a window?
Measure the height from the head of the window (top fixed-frame piece) to the windowsill (bottom fixed-frame piece) As with the width, take three measurements: down the left side, right side and the middle. Record the shortest measurement — this ensures that the new window will fit.
How many inches to add to outside mount blinds?
You will need a minimum of 2 inches of vertical space in order to outside mount your blinds. If you don’t have that space, you will have to inside mount them.
