Table of Contents
“Slip” in an AC induction motor is defined as: As the speed of the rotor drops below the stator speed, or synchronous speed, the rotation rate of the magnetic field in the rotor increases, inducing more current in the rotor’s windings and creating more torque. Slip is required to produce torque.
What is normal slip of an induction motor?
Because of this speed difference, the motor rotates at a speed slightly slower than the synchronous speed. Slip is normally expressed in percentage. Slip of a power induction motor is 2 to 3% when the motor is operated under the rated load.
Why is slip necessary in an induction motor?
In induction motor, slip is important because slip determines torque and also the machine behaviour. So, torque is lowest when slip(s) is equal to 1 i.e. at standstill.
Can slip be more than 1?
Slip more than 1 implies that, rotor is rotating in a direction opposite to the direction of rotation of magnetic flux. This means if magnetic flux is rotating in clockwise direction, then rotor is rotating in anticlockwise direction or vice versa. Therefore, the relative speed between them will be (Ns + Nr).
What is slip percentage?
The difference between theoretically calculated forward speed based on angular speed of the rim and rolling radius, and actual speed of the vehicle, expressed as a percentage of the latter, is called ‘slip ratio’.
How does load affect DC motor?
As the load torque increases the speed of the motor decreases, and assuming the terminal voltage stays constant, the EMF will become lower and thus the armature current will increase. Dec 7, 2014
How is slip in motor calculated?
Slip speed is the speed difference between the Synchronous speed and Rotor speed. Slip speed = Synchronous speed – Rotor speed = Ns -N. Slip, s = (Ns – N) / Ns.
Why must slip be present for Motor Action?
Because of the above phenomenon, the rotor speed “N” is always less than the synchronous speed “Ns” which keeps the motor moving. This difference between synchronous speed of the rotating magnetic field and synchronous speed is known as slip. Hence slip is an essential feature for proper working of the induction motor.
What will happen when the slip is 100 and zero?
What will happen when the slip is 100 and zero? As the rotor ends are short circuited current flows through the rotor. So when slip is zero there is no phase difference between stator flux and rotor flux and there is no torque exerted on rotor and rotor does not rotate .
What is slip and its significance?
Importance of Slip in Induction Motor. In the induction motor rotor always rotates speed less than synchronous speed. The difference between the rotor speed (N) and the rotating magnetic flux speed (Ns) is called slip.
What is range of slip of induction motor for no-load?
No-load slip value percentage in an induction motor is: More than 50% About 30% Around 5% Less than 1%Mar 9, 2020
What is a high slip motor?
A high slip motor allows the torque to increase torque per amps even as the motor moves from fixed speed to the locked rotor state. Standard NEMA Design A, B, or C motors operate at one to five percent slip. A NEMA D motor has a high slip of five to thirteen percent.
What is Torque slip?
The torque slip curve for an induction motor gives us the information about the variation of torque with the slip. The slip is defined as the ratio of difference of synchronous speed and actual rotor speed to the synchronous speed of the machine.
What causes motor slip?
The interaction of currents flowing in the rotor bars and the stators’ rotating magnetic field generate torque. In actual operation, rotor speed always lags the magnetic field’s speed, allowing the rotor bars to cut magnetic lines of force and produce useful torque. This speed difference is called slip speed.
What is slip speed?
The speed at which the induction motor work is known as the slip speed. The difference between the synchronous speed and the actual speed of the rotor is known as the slip speed. In other words, the slip speed shows the relative speed of the rotor concerning the speed of the field.
When can only slip of an induction motor is zero?
In motors the number of rotor slots and stator slots are different and thus cogging (magnetic locking) can’t happen. And thus The slip motor can’t run at rated speed. Torque developed by induction motor is proportional to the slip. At synchronous speed,slip is zero and hence torque developed by the motor is zero.
What is slip of a 3 phase induction motor?
The interaction of currents that is flowing in rotor and stator bars generate a torque. In an actual operation, the rotor speed always lags the magnetic field’s speed, thereby allowing the rotor bars to cut the magnetic lines of force and produce torque. This speed difference is called slip.
What is synchronous speed?
: a definite speed for an alternating-current machine that is dependent on the frequency of the supply circuit because the rotating member passes one pair of poles for each alternation of the alternating current.
What is slip formula?
Formula to find slip = (ns – n) x 100/ns. substitute the values in the above formulas. speed difference = 1500 – 1450. = 50. slip = 50/1500 x 100.
What happens if slip of induction motor is 1?
When the Value of Slip is >1 If the slip value of the motor is greater than one then the rotor will turn in the opposite direction to the revolution of magnetic flux. So if the magnetic flux is revolving in the direction of clockwise, then the rotor will turn rotating in the anti-clockwise direction.
What is the slip?
A slip is a woman’s undergarment worn beneath a dress or skirt. A full slip hangs from the shoulders, usually by means of narrow straps, and extends from the breast to the fashionable skirt length. A half slip (or waist slip) hangs from the waist.
What does negative slip mean?
Negative slip indicates that the motor is running above synchronous speed. This can happen only when it is driven by a prime mover. This motor becomes an induction generator.
