Table of Contents
Toilet Rough In Dimensions: A toilet’s rough-in measurement is the space between the wall behind the toilet and the center of the waste pipe. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.
Can you replace a 10-inch rough-in toilet with a 12-inch rough-in toilet?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
How far from the wall should a toilet rough-in Be?
The general rule of thumb for clearance from the wall that faces the bowl is 24″ and just about 15″ on each side. The rough-in measurement indicates how much clearance you have and will allow you to select a compatible toilet.
How do you measure a toilet rough-in?
The rough-in measurement of a toilet refers to the span between the wall behind the toilet and the center of the waste pipe. To measure the rough-in for your toilet, measure from the wall behind the toilet to the middle of the bolt caps (the caps holding your toilet to the floor).
Can you replace a 14-inch rough-in toilet with a 12-inch rough-in toilet?
Replace a 14-inch rough-in toilet with a 12-inch rough-in toilet. You can definitely replace a toilet with a rough-in of 14 inches with one with a rough of 12 inches. The problem with this method is that a 2-inch gap will be left between the toilet tank and the wall.
How do I know if my toilet is 10 or 12?
Take the cover off of the toilet tank, and lay the toilet on its side to access the underside of the base. Measure from the back edge of the base to the center of the closet hole, or drain hole. Note if the measurement is 10 inches or 12 inches.
Why would I want an elongated toilet bowl?
Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.
What does 10 inch rough in toilet mean?
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″.
How far does a toilet need to be from a shower?
Guidelines for Toilet/Bidet Placement The distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle should be at least 18 inches.
How much should it cost to have a toilet installed?
Toilet installation costs around $372, with most people paying between $224 and $531 for a full toilet replacement, depending on the type of toilet and the difficulty of the job. This includes the cost of the toilet, labor and equipment needed for the installation.
Do all toilets seats fit the same?
No, there isn’t a standard size for all toilet seats, due to a variety of toilet styles. There are key measurements that you will need, even though most seats are adjustable to fit the most common toilet bowl shapes. The measurements are: The distance between the fixing holes – where the screws are.
What is the smallest toilet you can get?
Tiny Bathrooms Julius Compact Toilet. The Julius toilet from Tiny Bathrooms is one of the smallest standard-plumbed toilets on our list. It has a depth of just 24 inches, is 14.25 inches wide, and stands 27 inches tall. If you don’t want the noise of a macerator, it’s about the most compact loo out there.
What is the standard size of a toilet?
Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″. Now you can find the perfect toilet.
Why are 14-inch rough in toilets so expensive?
MANY years ago, the 14″ toilets used the same tank as the 12″ ones and the bowls were made with the opening 2″ further from the back and they DID take up less legroom in the bathroom, but they decided it was cheaper to make different tanks than bowls.
Should a toilet be flush with the wall?
When installing a toilet, there is not a specific distance that the toilet tank should be from the wall. Whether your toilet is one inch from the wall or touching the wall directly, it is really up to your preference.
What is a UniFit adapter?
The TOTO UniFit adapter is a useful plumbing fixture that enables you to install a toilet that fits multiple rough in sizes. This could be 10″, 12″, or 14″. If you’re looking for information on the actual UniFit attachment rather than a list of the toilets it’s compatible with, Click Here.
What is a good toilet to buy?
8 Best Toilets for the Home in 2021 Best Overall Toilet: Kohler Corbelle K-3814-0. Best Toilet for Modern Spaces: Swiss Madison Well Made Forever One Piece Toilet. Best Two-Piece Toilet: TOTO Promenade 2-Piece Toilet. Best Value One-Piece Toilet: Glacier Bay 1-piece Dual Flush Toilet.
How do I choose the right toilet?
We’ve put together a few tips to help you choose the toilet that’s right for your bathroom. Check the plumbing. Your existing bathroom will have plumbing that’s set up for your specific layout. Determine your pan type. Measure the set-out. Water efficiency. Styles of toilet. Close coupled. Connector. Concealed.
What is comfort height toilet?
Comfort height toilets (or “right height” toilets) have higher seats than traditional toilets, usually between 17 inches and 19 inches.
Which is better round or elongated toilet?
Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.
