What Is The R Value Of Foam Board

What is the R-value of foam board insulation? Foam board insulation R-value varies based on type but is anywhere from 3.6 per inch of insulation thickness to 8.0. The types of foam board insulation include polyurethane, polyisocyanurate, extruded polystyrene foam, and expanded polystyrene foam.

What is the R-value of 2 inch foam board?

A wall utilizing STYROFOAM T-MASS Technology with a 2-inch exterior layer and a 4-inch interior layer of concrete along with a 2-inch layer of STYROFOAM extruded polystyrene insulation would result in a material R-value of approximately 11.33.

What is the R-value of rigid foam?

Extruded polystyrene: Extruded polystyrene (XPS) rigid foam is usually blue or pink in color, with a smooth plastic surface. XPS panels typically aren’t faced with other material. The R-value is about R-5.

What is the R-value of 1 inch foam board?

R-values can range from 3.6 to 4.2 per inch.

Is foam board a good insulator?

Foam board insulation provides good thermal resistance and reduce heat conduction through structural elements, such as wood and steel studs, according to the U.S. DOE.

What is the R-value of 4 inch foam board?

Foam Board Insulation R-Value per inch Thickness (in Inches) R-value (in I-P/Imperial) RSI (R-value in Metric) 2.5 15.5 2.7 3.0 18.6 3.24 3.5 21.7 3.78 4.0 24.8 4.32.

How thick should foam board insulation be?

Most panels range between 3/8″ and 2.5″ in thickness, though other dimensions and thicknesses are usually available through custom order.

What is the difference between pink and blue foam board?

Main Difference Between Pink And Blue Foam Boards The two products also have the same insulating power. However, blue foam boards are manufactured by Dow Chemical Co. whereas the pink foam boards are manufactured by Owens Corning company. The boards are marketed under different brand names.

Which foam board insulation is best?

Extruded polystyrene (XPS), also known as blueboard, acts as the best insulating foam board for below-grade applications, according to the U.S. Green Building Council. XPS offers greater moisture resistance than EPS, without the need for special films or coating to fend off moisture.

What is the R-value of 2 rigid foam insulation?

With an R-value of 13.1 for a 2″ thick sheet only two 2″ sheets are required to achieve R-25. 2. Extruded polystyrene or XPS (foam is usually pink or blue) XPS has an R-value of 5 per inch of thickness requiring 5″ of insulation to achieve R-25.

What is the thinnest insulation board?

OPTIM-R is Kingspan’s thinnest insulation. It comprises a rigid vacuum insulation panel (VIP) with a microporous core which is evacuated, encased and sealed in a thin, gas-tight envelope which gives an outstanding thermal conductivity of 0.007 W/m.K. Benefits for architects, builders and homeowners.

Does doubling insulation Double R-value?

Doubling the thickness of insulation will double the insulation’s R-value, cutting heat loss in half. In some cases, like an attic, it’s worth piling on more insulation because there is plenty of room. It’s much more expensive to add that much insulation to exterior walls.

How thick is r30 insulation?

8¼ ” thick, R-30C EcoTouch® Thermal Batt insulation prevents moisture damage and helps assure long roof life by providing 1″ of ventilation air space between the insulation and roof deck.

What is the R-value of spray foam insulation?

Closed-Cell Spray Foam Insulation Closed-cell spray foam has a far better R-value per inch than other, less effective insulations like cellulose, fiberglass, or even open-cell foam. All these have R-values ranging from R-3.2 to R-3.8 per inch. The R-value of closed-cell foam is R-6.5-7 per inch.

What temp does foam board melt?

What is this? Styrofoam is made from expanded polystyrene, and it does not withstand heat well. It will start to soften at 212 °F, and it will melt at 464 °F. You can use styrofoam containers to preserve food in the fridge, but you can never reheat it or cook it in the oven.

Can you use foam board instead of OSB?

Some builders use two layers of sheathing — plywood or OSB for structural support and a seam-staggered layer of rigid foam for insulation. A cost-effective way to increase the R-value of exterior walls, while also providing moisture control, is to use insulated foam sheathing instead of wood sheathing.

Does foam board insulation need a vapor barrier?

Foam insulation usually does not require a vapor barrier. For some foam insulation types, such as closed-cell spray foam and foam board insulation, the insulation itself stops the movement of most water vapor.

Can you put fiberglass insulation over foam board?

insert foam board between the studs to seal everything up tight, and then install fiberglass batts over the foam board. Finish with plastic stapled to the studs, then drywall.

Can foam board insulation be layered?

Polyiso is the insulation of choice for commercial roof applications because its closed cell characteristics create more R-value per inch than any other rigid foam board insulation product.

Which side of foam board insulation faces out?

If you’re wondering whether to put the foil side of foam insulation board shiny side in or out, consider whether you want to make the space inside warmer or cooler. If you want to make the space warmer, the foil should face inside so it can reflect radiant heat back into the room.

Can you walk on foam board insulation?

The physical properties of MEPS foam board vary with the type of bead used. It’s manufactured at various densities, depending on the application. Beadboard for roofing materials has to be dense enough to walk on without damage; wall insulation foam boards are several times less dense than roof boards.

What insulation has the highest R-value per inch?

Vacuum insulated panels have the highest R-value, approximately R-45 (in U.S. units) per inch; aerogel has the next highest R-value (about R-10 to R-30 per inch), followed by polyurethane (PUR) and phenolic foam insulations with R-7 per inch.