Table of Contents
R-Value Chart for EnerfoilTM Rigid Foam Faced Insulation Thickness (Inches) R-value (in I-P/Imperial) RSI (R-value in Metric) 1.0 6.2 1.08 1.5 9.3 1.62 2.0 12.4 2.16 2.5 15.5 2.7.
What is the R-value of 2-inch Blueboard insulation?
DOW BLUE BOARD 2″ 2’X8′ 250 PSI R-VALUE=10.8.
How many inches of rigid insulation is R30?
The thickness of R30 Insulation will vary in accordance with the products used to form the insulation, and it may vary from 6″ up to 12.4.”How Thick is R30 Insulation? A Brief Guide. Insulation Material Type R30 Insulation Thickness Closed-cell spray-foam 4.25 to 6 inch Foam Board insulation (Rigid foam) 7.5 to 8.33 inch.
What is the R-value of rigid board insulation?
Rigid foam board insulation indeed has some of the best R-values of all insulation materials. Polyisocyanurate features an R-value up to 8.0, which other insulating materials cannot touch. Spray foam insulation, especially the closed-cell kind, has an R-value of 6.0 per inch, sometimes as high as 6.5.
What is the R-value of 2-inch high density foam?
Thermal Control Installed insulation R-value: The installed insulation R-value depends somewhat on the system manufacturer but generally speaking, high density foam (2.0 pcf) ranges between R-5.5 and R-6.5 per inch for the aged R-value, and low density foam (0.5pcf) has an R-value of approximately R-3.6/inch.
What is the difference between pink and blue foam board?
Main Difference Between Pink And Blue Foam Boards The two products also have the same insulating power. However, blue foam boards are manufactured by Dow Chemical Co. whereas the pink foam boards are manufactured by Owens Corning company. The boards are marketed under different brand names.
What is the R-value per inch of fiberglass batts?
Fiberglass batts and rolls are ideal for placement between framing during construction in floors, walls, attics, and ceilings. They’re denser than blown-in insulation, offering an R-value of up to 4.3 per inch.
What is the R-value of 4 inch foam board?
This product typically has an R value of 3.6 to 4.0 per inch of thickness.
What is the recommended R-value for attic?
The absolute minimum for attic insulation R-values across the country is R-30, with upper recommended ranges between R-49 and R-60 for zones 1 through 3.
What kind of insulation do you use for a cathedral ceiling?
Most home contractors would probably tell you that the best insulation to use for a vaulted ceiling is fiberglass insulation. The main reasons are that fiberglass is one of the most inexpensive types of insulation that you can purchase, and fiberglass batts are relatively easy to install in vaulted ceilings.
What insulation has the highest R-value per inch?
Vacuum insulated panels have the highest R-value, approximately R-45 (in U.S. units) per inch; aerogel has the next highest R-value (about R-10 to R-30 per inch), followed by polyurethane (PUR) and phenolic foam insulations with R-7 per inch.
What is the R-value of 1 inch foam board?
• Also called Styrofoam insulation, this is the least expensive material. It provides R-values that range from 3.6 to 4.2 per inch.
What is Type 2 rigid insulation?
InsulFoam II Below Grade is an engineered insulation consisting of a superior closed-cell, lightweight and resilient expanded polystyrene (EPS). InsulFoam II meets or exceeds the requirements of ASTM C578, Type II, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation.
What is a good R-value for insulation?
Typical recommendations for exterior walls are R-13 to R-23, while R-30, R-38 and R-49 are common for ceilings and attic spaces. See the Department of Energy’s (DOE) ranges for recommended levels of insulation below.
What rigid foam insulation is best?
Expanded polystyrene (EPS), or beadboard, serves as the best insulating rigid foam for homeowners on a budget. This material costs less than other rigid foam boards, but still offers an R–value of 3.6 to 4.2 per inch, according to Fine Homebuilding.
Can you layer rigid foam insulation?
The benefits of adding a layer of rigid-foam insulation to the exterior of walls and roofs are twofold. First, the foam will increase thermal performance by adding R-value and minimizing thermal bridging.
What does SM stand for in insulation?
Styrofoam SM extruded polystyrene (XPS) foam Insulation is a versatile, multipurpose board that fits the needs of the commercial and residential foundation and slab market. The freeze-thaw cycling of the foundation wall is minimized, reducing the possibility of cracking.
What is the R-value of Styrofoam SM?
STYROFOAM SM Insulation is an extruded polystyrene foam which has an insulation value of R-5 per inch.
What is XPS foam board?
Expanded Polystyrene, referred to as XPS, is a closed cell insulation product commonly used in remodeling and new construction applications. Due to the manufacturing process, XPS insulation is typically available only in standard dimension square or rectangular boards.
What is the R-value of 3 inch fiberglass insulation?
For example, a wall with 3 ½” fiberglass batting (R-value of 10.8 – 11.9) may have an overall R-value of nearly 14 because … Fiberglass Batt Insulation Standard fiberglass insulation batts or blankets provide an R-value of 2.2 to 3.8 per inch of thickness.
What is the R-value of pink fiberglass insulation?
2.2 – 2.9 Insulation Type: R-Value per Inch: Fiberglass (loose) 2.2 – 2.9 Fiberglass (batts) 2.9 – 3.8 Cellulose (loose) 3.1 – 3.8 Stone Wool (loose) 2.2 – 3.3.
What is the R-value of 3 1/2 inch fiberglass insulation?
For example, standard low-density batts, at their nominal rated thickness — R-11 at 3 1/2 inches, or R-19 at 6 inches — have an R-value of about 3.1 per inch. If you compress a 6-inch R-19 batt into a 3 1/2-inch cavity, you get about R-14, or 4.0 per inch.
