Table of Contents
A wall utilizing STYROFOAM T-MASS Technology with a 2-inch exterior layer and a 4-inch interior layer of concrete along with a 2-inch layer of STYROFOAM extruded polystyrene insulation would result in a material R-value of approximately 11.33.
What is the R-value of 2 rigid foam?
With an R-value of 13.1 for a 2″ thick sheet only two 2″ sheets are required to achieve R-25. 2. Extruded polystyrene or XPS (foam is usually pink or blue) XPS has an R-value of 5 per inch of thickness requiring 5″ of insulation to achieve R-25.
What is the highest R-value foam board?
Choose the right type of rigid foam for your needs Polyisocyanurate: Known as polyiso for short, polyisocyanurate foam has the highest R-value per inch (R-6.5 to R-6.8) of any rigid insulation. This type of rigid foam usually comes with a reflective foil facing on both sides, so it can also serve as a radiant barrier.
Is foam board a good insulator?
Foam board insulation provides good thermal resistance and reduce heat conduction through structural elements, such as wood and steel studs, according to the U.S. DOE.
What is the R-value of 2 inch Styrofoam SM?
STYROFOAM SM Insulation is an extruded polystyrene foam which has an insulation value of R-5 per inch.
What is the R-value of 1/2 inch foam?
STYROFOAM/BLUE BOARD 1/2″ 4’X8′ DOW R-VALUE 3.0 (RESIDENTIAL SHEATHING)/ P2S FACING.
What is the R-value of 4 inch foam board?
Foam Board Insulation R-Value per inch Thickness (in Inches) R-value (in I-P/Imperial) RSI (R-value in Metric) 2.5 15.5 2.7 3.0 18.6 3.24 3.5 21.7 3.78 4.0 24.8 4.32.
What is the R-value of 2 inch Blueboard insulation?
DOW BLUE BOARD 2″ 2’X8′ 250 PSI R-VALUE=10.8.
How thick should foam board insulation be?
Most panels range between 3/8″ and 2.5″ in thickness, though other dimensions and thicknesses are usually available through custom order.
What is the difference between pink and blue foam board?
Main Difference Between Pink And Blue Foam Boards The two products also have the same insulating power. However, blue foam boards are manufactured by Dow Chemical Co. whereas the pink foam boards are manufactured by Owens Corning company. The boards are marketed under different brand names.
What is the R-value of 1 inch foam board?
R-values can range from 3.6 to 4.2 per inch.
What is the highest R-value per inch insulation?
Vacuum insulated panels have the highest R-value, approximately R-45 (in U.S. units) per inch; aerogel has the next highest R-value (about R-10 to R-30 per inch), followed by polyurethane (PUR) and phenolic foam insulations with R-7 per inch.
Which side of foam board insulation faces out?
If you’re wondering whether to put the foil side of foam insulation board shiny side in or out, consider whether you want to make the space inside warmer or cooler. If you want to make the space warmer, the foil should face inside so it can reflect radiant heat back into the room.
What R-value is foam board?
What is the R-value of foam board insulation? Foam board insulation R-value varies based on type but is anywhere from 3.6 per inch of insulation thickness to 8.0. The types of foam board insulation include polyurethane, polyisocyanurate, extruded polystyrene foam, and expanded polystyrene foam.
Which foam board insulation is best?
Extruded polystyrene (XPS), also known as blueboard, acts as the best insulating foam board for below-grade applications, according to the U.S. Green Building Council. XPS offers greater moisture resistance than EPS, without the need for special films or coating to fend off moisture.
How thick is r10 rigid insulation?
Standard extruded polystyrene requires a thickness of 2″ to achieve an R-10.
What is the thinnest insulation board?
OPTIM-R is Kingspan’s thinnest insulation. It comprises a rigid vacuum insulation panel (VIP) with a microporous core which is evacuated, encased and sealed in a thin, gas-tight envelope which gives an outstanding thermal conductivity of 0.007 W/m.K. Benefits for architects, builders and homeowners.
Can foam board insulation be layered?
Polyiso is the insulation of choice for commercial roof applications because its closed cell characteristics create more R-value per inch than any other rigid foam board insulation product.
How thick is r30 insulation?
8¼ ” thick, R-30C EcoTouch® Thermal Batt insulation prevents moisture damage and helps assure long roof life by providing 1″ of ventilation air space between the insulation and roof deck.
Does foam board insulation need a vapor barrier?
Foam insulation usually does not require a vapor barrier. For some foam insulation types, such as closed-cell spray foam and foam board insulation, the insulation itself stops the movement of most water vapor.
Can you put fiberglass insulation over foam board?
insert foam board between the studs to seal everything up tight, and then install fiberglass batts over the foam board. Finish with plastic stapled to the studs, then drywall.
What is the R-value of 1 2 drywall?
0.45 Material R-Value (ft 2 o Fh / BTU) 1/2 inch Gypsum Board (Drywall or plasterboard) 0.45 Wood Siding, 1/2 inch 0.81 Plywood, 3/4 inch 0.94 Insulating sheathing, 3/4 inch 2.06.
What is the R-value of spray foam in a 2×4 wall?
Open-cell spray foam absorbs and holds water. It has a lower R-value per inch than closed-cell foam and is vapor-permeable. The R-value is R-3.5 to R-3.6 per inch, so filling a 2×4 cavity yields about an R-13.
What is the R-value of foil board?
Attached to the face of studs, FOILBOARD® INSULATION PANEL eliminates thermal bridging through the frame and air infiltration. Without insulation a cavity brick wall has an ‘R’ value of 0.5. FOILBOARD® INSULATION PANEL in the cavity will achieve R1. 8 with STANDARD 10 and R2.
