Table of Contents
Coagulation and flocculation are used to separate the suspended solids portion from the water. Suspended particles vary in source, charge, particle size, shape, and density.
What is the purpose of coagulation in water treatment?
Coagulation is a process for combining small particles into larger aggregates (flocs) and for adsorbing dissolved organic matter on to particulate aggregates so that these impurities can be removed in subsequent solid/liquid separation processes.
What is the ultimate goal of coagulation and flocculation?
Terms in this set (50) What is the purpose of coagulation and flocculation? The purpose of coagulation and flocculation is to remove particulate impurities and color from the water being treated.
What is the purpose of flocculation?
Effect on Turbidity As with coagulation, the purpose of flocculation is not to directly reduce turbidity or suspended solids, but to prepare the solids for subsequent removal. Flocculation reduces the number of suspended solids particles as smaller particles combine to form larger ones.
What is coagulant and flocculant?
Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts. Generally speaking, anionic flocculants are used to catch mineral particles while cationic flocculants can capture organic particles.
What are the 4 steps of water treatment?
These include: (1) Collection ; (2) Screening and Straining ; (3) Chemical Addition ; (4) Coagulation and Flocculation ; (5) Sedimentation and Clarification ; (6) Filtration ; (7) Disinfection ; (8) Storage ; (9) and finally Distribution. Let’s examine these steps in more detail.
Why alum is used as coagulant?
When alum is added to water, it reacts with the water and results in positively charged ions. Coagulation removes colloids and suspended solids from the water. These particles have a negative charge, so the positively charged coagulant chemicals neutralize them during coagulation.
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
What is difference between flocculation and coagulation?
Coagulation: Particles that aggregate with themselves e.g. by the influence of a change in pH. Flocculation: Particles that aggregate by the use of polymers that binds them together. Coagulation and flocculation are well-known techniques within wastewater treatment.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
Can you use too much flocculant?
Flocculant is aluminum sulfate, which is designed to clump with the particles you’re trying to remove. But if you add too much, the flocculant will start to agglomerate with itself instead of those particles. These flocculant clumps will not drop to the pool floor and can clog up your filter.
What chemicals are flocculants?
The Flocculant / Coagulant Chemicals ferric sulfate (Iron Sulfate)- Fe2(SO4)3. ferrous sulfate. ferric chloride. ferric chloride sulfate.
How is flocculation prevented?
Design contact times for flocculation range from 15 or 20 minutes to an hour or more, and flocculation requires careful attention to the mixing velocity and amount of mix energy. To prevent floc from tearing apart or shearing, the mixing velocity and energy are usually tapered off as the size of floc increases.
Is gypsum a flocculant?
Gypsum can coagulate or bridge clay particles, which accelerates settling. Flocculants should be used to prevent damage to sensitive water resources such as ponds, lakes and trout streams or whenever turbidity control is required. The best thing to do is a jar or bucket test using slightly varying rates of gypsum.
What is the function of coagulant?
Coagulation treatment neutralizes the negative electrical charge on particles, which destabilizes the forces keeping colloids apart. Water treatment coagulants are comprised of positively charged molecules that, when added to the water and mixed, accomplish this charge neutralization.
What makes a good flocculant?
Polymers are useful as flocculants because they are robust molecules and sometimes carry charges. Because they are so large, small particles can get trapped in the curves of the polymer causing them to accumulate a mass heavy enough to prevent their retention in solution.
What is the first step of raw water treatment?
Coagulation and flocculation are often the first steps in water treatment. Chemicals with a positive charge are added to the water. The positive charge of these chemicals neutralizes the negative charge of dirt and other dissolved particles in the water.
What materials Cannot be removed from wastewater?
When wastewater arrives at the treatment plant, it contains many solids that cannot be removed by the wastewater treatment process. This can include rags, paper, wood, food particles, egg shells, plastic, and even toys and money.
What is the most important step in water treatment?
It is, however, an important primary step in the water treatment process, because coagulation removes many of the particles, such as dissolved organic carbon, that make water difficult to disinfect. Because coagulation removes some of the dissolved substances, less chlorine must be added to disinfect the water.
What are the side effects of alum?
If experienced, these tend to have a Severe expression i fluid accumulation around the eye. throat swelling. a feeling of throat tightness. a skin ulcer. hives. a shallow ulcer on the skin. fainting. puffy face from water retention.
Is alum positive or negative?
For example, the colloidal particles are negatively charged and alum is added as a coagulant to create positively charged ions. Once the repulsive charges have been neutralized (since opposite charges attract), van der Waals force will cause the particles to cling together (agglomerate) and form micro floc.
Is alum a coagulant?
Alum is one of the most widely used coagulants in the water treatment industry (Benschoten and Edzwald 1990). For water and wastewater treatment, the coagulants used more frequently are the inorganic salts of aluminum.
Which are two chemicals used to purify water?
Both chlorine and chloramines work to kill bacteria and other harmful substances that may be found in drinking water sources.
What are the chemicals used for coagulation?
The main chemicals used for coagulation are aluminium sulphate (alum), polyaluminium chloride (also known as PAC or liquid alum), alum potash, and iron salts (ferric sulphate or ferric chloride).
What is the most used coagulant?
Chemical Coagulants Used In Water Treatment Aluminum Sulfate (Alum) – One of the most commonly used water treatment chemicals in the world. Aluminum Chloride – A second choice to Alum as it is more expensive, hazardous and corrosive. Polyaluminum Chloride (PAC) & Aluminum Chlorohydrate (ACH).
