Table of Contents
The purpose of the jar test is to estimate the minimum coagulant dose required to achieve certain water quality goals. Jar tests are conducted on a four- or six-place gang stirrer, which can be utilized to simulate mixing and settling conditions in a clarifier.
What are the two objectives of jar tests?
The objectives of the jar test experiment are to estimate the optimum concentration of aluminum sulfate for the removal of suspended matter and to investigate the change in alkalinity as a result of aluminum sulfate addition.
What is the main purpose of coagulation flocculation?
Coagulation and flocculation are used to separate the suspended solids portion from the water. Suspended particles vary in source, charge, particle size, shape, and density.
Why the flocculation process in important in the water treatment?
Flocculants are substances that promote the agglomeration of fine particles present in a solution, creating a floc, which then floats to the surface (flotation) or settles to the bottom (sedimentation). This can then be more easily removed from the liquid.
Does alum increase pH?
Ionic species present in alum solutions are highly dependent on the degree of reaction with hydroxyl ions. It is tempting to say that “the composition is pH-dependent.” However, in the vicinity of pH=4.3 the composition of alum solutions changes a great deal with very little change in pH.
How effective is coagulation?
Several studies have reported the effectiveness of dual coagulants application when dealing with various types of wastewater where it can reduce up to 90% of COD, total suspended solids (TSS), turbidity, and colour.
What is the process of flocculation?
Flocculation is a process by which a chemical coagulant added to the water acts to facilitate bonding between particles, creating larger aggregates which are easier to separate. The method is widely used in water treatment plants and can also be applied to sample processing for monitoring applications.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
What is formed when coagulant is added to water?
Explanation:When coagulant is added to water, then white gelatinous precipitate is formed called floc.
How does a coagulant work?
Coagulants work by creating a chemical reaction, eliminating negative charges that cause particles to repel each other. The action of these bubbles forces clots or flocs of particles to the water surface where they can be skimmed off. Dissolved air flotation is an alternative to sedimentation.
How the coagulant works in jar test?
The jar test involves exposing same volume samples of the water to be treated to different doses of the coagulant and then simultaneously mixing the samples at a constant rapid mixing time. The microfloc formed after coagulation further undergoes flocculation and is allowed to settle.
What is the best coagulant?
Chemical Coagulants Used In Water Treatment Aluminum Sulfate (Alum) – One of the most commonly used water treatment chemicals in the world. Aluminum Chloride – A second choice to Alum as it is more expensive, hazardous and corrosive. Polyaluminum Chloride (PAC) & Aluminum Chlorohydrate (ACH).
Is gypsum a flocculant?
Gypsum can coagulate or bridge clay particles, which accelerates settling. Flocculants should be used to prevent damage to sensitive water resources such as ponds, lakes and trout streams or whenever turbidity control is required. The best thing to do is a jar or bucket test using slightly varying rates of gypsum.
What is the purpose of coagulation?
Coagulation is a process used to neutralise charges and form a gelatinous mass to trap (or bridge) particles thus forming a mass large enough to settle or be trapped in the filter.
What is coagulation of water?
Coagulation is the chemical water treatment process used to remove solids from water, by manipulating electrostatic charges of particles suspended in water. This process introduces small, highly charged molecules into water to destabilize the charges on particles, colloids, or oily materials in suspension.
What full scale processes are stimulated when conducting the jar?
n the drinking water field, the jar test is described as a “bench-scale” simulation of full-scale coagulation/flocculation/ sedimentation water treatment processes.
What is the important of jar test?
Jar test is a pilot-scale laboratory test that simulates coagulation or flocculation with differing chemical doses. The purpose of the jar test is to estimate the minimum coagulant dose required to achieve certain water quality goals.
What is the purpose of rapid mixing in jar test?
Rapid mixing of the water and coagulant is important to ensure thorough and even distribution of the coagu- lant. Flocculation is a slow gentle mixing of the water to encourage the flocs to forn and grow to a size which will easily settle out. This mixing is often done in a chamber or a series of chambers.
What is the difference between flocculant and coagulant?
Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts. Generally speaking, anionic flocculants are used to catch mineral particles while cationic flocculants can capture organic particles.
What are the 4 steps of water treatment?
These include: (1) Collection ; (2) Screening and Straining ; (3) Chemical Addition ; (4) Coagulation and Flocculation ; (5) Sedimentation and Clarification ; (6) Filtration ; (7) Disinfection ; (8) Storage ; (9) and finally Distribution. Let’s examine these steps in more detail.
What is meant by flocculant?
A flocculant is a compound or agent which is added to a vessel to make particles stick together and form larger particles. Flocculants are added to encourage floc formation and enhance settling and compression rates. Flocculation involves the addition of a flocculant that causes the particles to stick together.
How do you run a jar test?
The jar test procedures involves the following steps: Add the coagulant to each container and stir at approximately 100 rpm for 1 minute. Turn off the mixers and allow the containers to settle for 30 to 45 minutes. Reduce the stirring speed to 25 to 35 rpm and continue mixing for 15 to 20 minutes.
What is the purpose of rapid and slow mixing?
It is a common practice to provide an initial rapid (or) flash mix for the dispersal of the coagulant or other chemicals into the water. Slow mixing is then done, during which the growth of the floc takes place.
