Table of Contents
Flocculation is a two-step particle aggregation process in which a large number of small particles form a small number large flocs. Small particles usually carry negative surface charges that hinder aggregation and settling (1a). Coagulant chemicals can adsorb to the particles and balance the charges.
What is the process of flocculation?
Flocculation is a process by which a chemical coagulant added to the water acts to facilitate bonding between particles, creating larger aggregates which are easier to separate. The method is widely used in water treatment plants and can also be applied to sample processing for monitoring applications.
What is flocculation process in water treatment?
Flocculation is a water treatment process where solids form larger clusters, or flocs, to be removed from water. This process can happen spontaneously, or with the help of chemical agents. It is a common method of stormwater treatment, wastewater treatment, and in the purification of drinking water.
What is flocculation Mcq?
Flocculation is basically slow mixing or agitation process in which destabilized colloidal particles are brought into intimate contact in order to promote agglomeration. The ratio of flocculation depends on. Turbidity.
What are the similarities and differences between flocculation and coagulation?
Coagulation is a chemical process and flocculation is a physical process, In coagulation, the process involves the utilization of a coagulant that has the ability to destabilize the charged particles which are not settleable whilst flocculation involves a similar destabilization process that is achieved through Dec 10, 2017
How does a flocculation tank work?
Chemicals (coagulants) are added to the water to bring the nonsettling particles together into larger, heavier masses of solids called floc. The flocculation tank has wooden paddle-type mixers that slowly rotate on a horizontal motor-driven shaft. After flocculation the water flows into the sedimentation tanks.
What is the best coagulant?
Chemical Coagulants Used In Water Treatment Aluminum Sulfate (Alum) – One of the most commonly used water treatment chemicals in the world. Aluminum Chloride – A second choice to Alum as it is more expensive, hazardous and corrosive. Polyaluminum Chloride (PAC) & Aluminum Chlorohydrate (ACH).
What is flocculation test?
A Flocculation Test Procedure is used to determine how much Flocculants need be added to solids in suspension (slurry or pulp) to cause the individual particles to collect in the form of flocs. Flocculation, i.e. aggregation through the use of long-chain organic polymers that bridge between adjoining particles.
What is the result of flocculation?
Flocculation allows for the destabilized particles to agglomerate into larger particles that can be removed by gravity through sedimentation. The mixing energy must be low enough to allow mixing and particle contact while not providing so much energy that the delicate floc particles shear apart.
What is the other name for flocculation Mcq?
What is the other name for deflocculation? Explanation: Deflocculation is the exact opposite of flocculation, also sometimes known as peptisation. Usually in higher pH ranges in addition to low ionic strength of solutions and domination of monovalent metal cations the colloidal particles can be dispersed. 3.
How often can you use flocculant?
You can reuse a clarifier after 5-7 days, but if you’re constantly seeing cloudy water, there may be other problems. Adding too much flocculant can cause its own issues.
Which causes hoop tension in pipe shell?
Clarification: Internal water pressure causes hoop tension in pipe shell and its magnitude is given by f = pd/2t where p is the internal pressure of water, d is the diameter of the pipe and t is the thickness of pipe shell.
What is difference between flocculation and coagulation?
Coagulation: Particles that aggregate with themselves e.g. by the influence of a change in pH. Flocculation: Particles that aggregate by the use of polymers that binds them together. Coagulation and flocculation are well-known techniques within wastewater treatment.
Which gas is released when alum is added to water?
Explanation: Carbon dioxide gas is released when alum is added to water, which is corrosive to metals.
How can flocculation be prevented?
When particles of a suspension come close together they can form aggregates called flocculates which will settle more rapidly. To prevent that we often coat the particle with a charged surfactant. The charge (Zeta potential) acts to keep the particles separate and prevent flocculation.
What is the importance of flocculation?
Flocculants improve filtration, leading to an improved cleaning and disinfection of the water. This treatment method is recommended when the filtration system struggles to remove all the floating particles (murky/troubled water).
Is coagulation reversible?
Coagulation is irreversible, the proteins cannot be turned back into their liquid form.
What do u mean by flocculation?
Flocculation is a two-step particle aggregation process in which a large number of small particles form a small number large flocs. Step 1: Coagulation. Small particles usually carry negative surface charges that hinder aggregation and settling (1a).
Is flocculation good for soil?
In all but the sandiest soils, dispersed clays plug soil pores and impede water infiltration and soil drainage. Flocculation is important because water and oxygen moves mostly in large pores between aggregates moves mostly in large pores between aggregates. Also, plant roots grow mainly between aggregates.
What is an example of flocculation?
Flocculation and coagulation treatment chemicals are used in effluent wastewater water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering. Examples of ChemTreat coagulation products include aluminum salts, iron salts, and polyelectrolytes.
What is flocculating power?
Hint: Flocculating value or the coagulating value is the amount of the electrolyte which is needed so that 1 litre of colloidal solution precipitates easily. The coagulating power or flocculating power is the reciprocal of coagulating value or flocculating value.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
What causes flocculation to occur?
In dispersed clay slurries, flocculation occurs after mechanical agitation ceases and the dispersed clay platelets spontaneously form flocs because of attractions between negative face charges and positive edge charges.
