Table of Contents
That is the tub drain overflow plate, though it’s actually above the drain, not the faucet. (The opening in this plate leads to a tube that prevents the tub from overflowing by allowing water to run out even if the drain in the bottom of the tub is stopped.)Jun 6, 2019.
What is the silver circle in a bathtub?
The overflow drain on a bathtub prevents a bathroom flood by passively draining water once it reaches a certain level in the tub. The overflow drain pipe connects to the main tub drain pipe to dispose of the extra water.
What are the parts of a bathtub called?
The Main Parts of a Bathtub (with Illustrated Diagram) The Tub. Water Supply. Shower. Planar Cross. Shutoff Valves. Diverter Pipe. Drain. Rim.
What is the lever in the bathtub for?
The trip lever is the lever that makes the tub drain go up and down.
Does a bathtub have to have an overflow drain?
A bathtub does not have to have an overflow drain but a bathroom must have a mechanism to prevent flooding. Having a floor drain can be a practical alternative but insurance and building code considerations should be factored into your decision.
What is the thing in the shower called?
A valve is what keeps the water from flowing through your faucet and sends it to your showerhead instead. Although you’ve probably never heard it called a “diverter valve,” that is the part of your shower that you turn, push, or pull to send the water coming from your tub’s faucet to your showerhead.
What is the thing that turns on the shower called?
A shower diverter is the mechanism that reroutes the water from your bathtub faucet to your showerhead. Many shower diverters are controlled by a pin knob that you pull, but there are many types. Maybe yours is turned on with a button or with a third faucet handle between the bathtub’s hot and cold knobs.
What is the thing under the tub faucet?
Look inside the wall of the tub, just underneath the faucet and locate the round metal circle. This is the tub’s overflow valve cover, or overflow plate, which allows excess water to drain out instead of spilling over the tub wall.
What is bathtub apron?
The visible finished side, also called an skirt or apron, can be flat or bowed. Corner tubs have triangular-shaped designs that fit into the nook of a room. These units are often configured for two-person bathing. Drop-in tubs have no finished sides and are usually installed within a constructed deck and surround.
What does it mean when drain bubbles?
Gurgling is caused when something is preventing water or air from flowing through your drains. As the water slowly travels through your drains, air bubbles begin to form and create a gurgling sound. Whether it’s your sink, toilet or shower, all can make that gurgling sound.
How does the stopper in a tub work?
They work by a connection between the drain stopper and a lever via a rod mechanism hidden behind the bathtub. When the lever is up, the stopper is held in place, keeping your tub filled with water. When the lever is moved down, the stopper lifts and the tub drains.
Where does bathtub overflow drain go?
The main drain is usually located at the bottom of your bathtub. The overflow component is located several inches under the rim. The two drains connect to various tubes that run from the bathtub and ultimately merge into one central pipe.
Why does my bath overflow smell?
The overflow drain is trapping water or debris. Sometimes, that water can become stagnant or debris can enter the overflow drain. Both of these could create odors. If the problem is stagnant water, the introduction of hot water will help move it along and replace the stagnant water.
Why do baths have overflows?
So most baths have some sort of overflow “safety” drain or hole that is located (depending on your tub) somewhere under or near near the faucet. Our tub also loses so much hot water that its hard to keep the water warm.
What are the parts for a shower?
The 6 Most Common Shower Plumbing Parts Shower Head. The shower head is one of the shower plumbing parts that we connect to the water pipes by using a hose usually made of steel. Hot and Cold Water Pipes. Shower Valve. Shower Cartridge. Shower Strainer. Shower Pan.
What is a shower arm and flange?
Shower Components used as a pipe hole cover are called shower flanges. Shower flanges cover the hole where the shower arm attaches to the rough pipe in the wall. Shower arm wall plate flanges or escutcheons are decorative shower parts that give you a polished and finished design.
What is a shower mixer?
A shower mixer is a valve which draws from both your hot and cold water supplies and mixes them so that you can control the temperature of your shower.
Why won’t my shower stop running?
If your shower won’t stop running, the causes are a loose faucet and a faulty cartridge or faulty valve. To fix a shower that won’t stop running, tighten the faucet and replace the faulty cartridge or valve.
How do shower diverters work?
The diverter looks like a pin pulled upward from the bathtub faucet spout. It’s possible that it may come in the form of a third handle or a button that needs to be pushed or pulled. Either way, when the valve is activated, it engages a rubber stopper, which causes the water to flow in a different direction.
What is a tub flange?
“What is a tub flange?” It’s a “raised rim” around the edges of the tub that will sit against the shower walls.
What is a bathtub alcove?
The term refers to the bathtub being installed into a recess in your bathroom, which means quite commonly they are installed with three joining walls or a pocket alcove in your bathroom, with some modern designs only having two walls or a large window to remove the confined nature of this installation method.
What is a garden bathtub?
A garden tub is a soaking tub, always freestanding, oval shaped and deep enough to submerge your entire body inside. Growing increasingly in popularity, this style of bathtub is a more luxurious option to the more standard bathtub choices on the market.
