Table of Contents
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
Can I put fence posts 10 feet apart?
Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.
How much space do you need between 4×4 posts?
For Building a Deck Railing, Deck Frame, or Fence The maximum spacing of 4×4 deck posts should be 6 feet on center, while the maximum spacing of 6×6 deck posts should be 8 feet on center.
Should fence posts be 6 or 8 feet apart?
Fence posts should be set six to eight feet apart on a 6 foot wood fence. Do not go beyond eight feet or the fence may not be stable enough.
How far apart should fence posts be UK?
Fence posts should be 60cm deep in the ground and spaced 1.8m apart.
What is code for deck post spacing?
U.S. building code requires support posts for the rail structure to be no further apart than 6 feet on a deck with 4×4′ deck rail posts and no more than 8 feet apart for decks with 6×6′ deck rail posts. Posts should be no further apart than 5.5 feet on stairs.
What size t post do I need for a 4 ft fence?
When figuring out what size T-post to use for a four-foot fence, remember that you will drive the posts about two feet into the ground. This means you need posts that are at least 24 inches longer than how tall you want your fence. For a four-foot fence, you should use T-posts that are at least six feet long.
How many bags of cement do I need for a fence post?
1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.
What size Post do you use for an 8 foot fence?
A common rule of thumb, is to dig the hole 3 times as large as the post, and to a depth of 1/3-1/2 of the post height above ground. so for a 8′ high fence, using 4×4 posts. dig the holes 12″ in diameter, to a depth of 2 1/2 – 4′. Of course, that’s assuming you’re setting the posts in concrete.
How many posts does it take to support a straight fence 200 yards long if a post is placed every 20 yards?
If the posts are placed every 20 meters, you need 10 posts for this run.
How long of a post do I need for a 6 foot fence?
Keep the height of your fence in mind when digging your post holes. As a general rule of thumb, you’ll need to place at least 1/3 the height of the post in the ground. For example, a 6-foot tall fence will need at least 2 feet of post in the ground.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
Can I use 4×6 for deck post?
Size of the deck Most professionals will encourage you to consider going with a 6×6 deck post form the outset of the project. Decks that are going to be built higher than just a few feet off the ground will likely need something more substantial than a simple 4×4.
Can I use 4×4 for deck posts?
In the past, many decks were built with 4×4 support posts (also called structural posts). But these can bow seriously, even if a deck is only 3 feet off the ground. For that reason, we strongly recommend that you use 6x6s instead, even if your building department does not demand them.
How high should posts be on a deck?
InterNACHI is more conservative in its recommendations, which specify that posts should be no taller than 12 feet unless cross bracing is used between posts; if bracing is used, a maximum post height of 14 feet is acceptable.
What size fence post do I need for a 5ft fence?
Use 4in x 4in posts for fences of 5ft and over and 3in x 3in posts for anything under 5ft.
What is the difference between AU post and at post?
Steel T-posts and U-posts are used exclusively with wire fencing. T-posts are shaped like the letter T, and U-posts are shaped like the letter U. You can get away with a little more distance between posts if using barbed wire.
What size t post do you need for a 5 foot fence?
Firstly, let’s establish one simple rule: your t-posts should be about two feet longer than the height of your fence. This is why t-posts are typically sold at lengths between 5 and 10 feet.
Can you put dry concrete in a post hole?
Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.
Is it better to nail or screw fence boards?
Nails are faster than screws to install, meaning less labor for you or your builder (which may translate into lower installation cost). Screws, on the other hand, secure the fence better than nails. They also ensure easier rework should you need to replace a damaged picket.
How deep should a post hole be for a 6-foot fence?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole. Then compact and level the gravel using a post or 2×4.
